How to analyze the m1212nf printer

I installed the cd on my pc and I can print, but how can I scan m1212nf n.

I will include links to instructions for using the HP software and do not use the HP software for Mac and Windows users. I hope this helps.

Scanning without using the HP software for Windows and Mac users

Mac OS X 10.4 to 10.6 and OS X 10.7 - 10, 8: scanning with HP or HP Director

Scanning with HP LaserJet Scan software in Windows

Tags: HP Printers

Similar Questions

  • I need to know how to disable the test print cause everytime I turn on the printer prints featured.

    I need to know how to disable the test print cause everytime I turn on the printer prints featured.  It is hp1315 series.


    If you want to disable printing test page, you must check with the manual of the printer. Try the steps from the following link:

    An alignment Page prints whenever the all-in-one is turned on or off or a print job is started

    I suggest you to contact HP for better support.

    Additional information:

    Printer in Windows problems

  • How to analyze the image url in json?


    I get the response from the server and crawled through json. And display it in the field

    Like name1 as:

    try {}
    labelField1.setText (jsonObject2.get("name1").toString ());

    catch (JSONException e)

    System.out.println ("JSONException Description");

    Similarly, I want to make the image. How to analyze the url of the image and display it in the BitmapField?

    You must create a separate thread to extract the bytes of the image of the URL you have.

    You can use the following code to get the image to the server.

    public EncodedImage getImageBytesFromURL(String url){
            ConnectionFactory connFactory = null;
            ConnectionDescriptor connDescriptor = null;
            HttpConnection httpConn = null;
            InputStream inputStream = null;
            byte[] response = null;
            try {
                connFactory = new ConnectionFactory();
                connDescriptor = connFactory.getConnection(url;interface=wifi);
                if (connDescriptor != null) {
                    httpConn = (HttpConnection) connDescriptor.getConnection();
                    inputStream = httpConn.openInputStream();
                    int responseCode = httpConn.getResponseCode();
                    if(responseCode == HttpConnection.HTTP_OK){
                        response = readStream(inputStream);
            }catch (IOException e) {
            }finally {
                try {
                    inputStream = null;
                    httpConn = null;
                    connDescriptor = null;
                    connFactory = null;
                } catch (Exception e) {
            EncodedImage encodedImage = null;
            if(response != null){
                encodedImage = EncodedImage.createEncodedImage(response, 0, response.length);
            return encodedImage;

    Remember that this method should be in a background thread. Otherwise, your user interface crashes. The encodedImage that returns the method above can be easily converted to bitmap and set in your bitmapfield.

  • 1 - How do I print the test page? 2 - How to change the default printer?

    1 - How to print a test page?

    2 - How to change the default printer?

    Yes, essentially the same as in Win 7.   Select the properties of the printer to print the test page.  That's where.

  • How to set the default printer for the user in 11i

    How to set the default printer for the user in 11i, please let me know how to set the new printer to the user, its Linux OS EBS 11i.

    Please see these documents.

    How to install the default printer for a user. [153927.1 ID]
    How to set up a default printer for a user in Oracle Applications [ID 1018856.102]
    How to set a default printer? [1237254.1 ID]
    How to configure the default printer for Applications [ID 184109.1]

    Thank you

  • How to analyze the files using Lexmark 2600 Series

    To the right:

    I have a Lexmark 2600 Series 3-in-1 printer. It is supposed to be able to scan. However, I can't figure out how to parse the files and I've lost the installation disc. However, the printer is already installed on my computer. I can't analyze. Can someone help me on how to scan files with this printer? Or, is there something I need to do first before that I can use the scanner fuction?

    Hi Xnygga,

    You will need to go to the Lexmark Web site to download the latest software/drivers for your scanner: & segment = DOWNLOAD

    I hope this helps!

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • How to darken the screen printing?

    I can't read the characters on the screen. How to darken the print on the page?

    Hi, you can find an addon like that creates a view that is easy to read Web pages or try adjusting the font settings in firefox: change, use the websites of fonts and colors

  • How to change the default printer in Thunderbird

    I have access to several printers that I use in different places. I have to manually change the choice of printer with each e-mail letter I want to print when I change my location when you use thunderbird. I already changed the default printer in my printers folder. All other programs, including Firefox accept the choice of the default printer. How can I get Thunderbird to accept my default without delete all THE OTHER PRINTERS?

    The menu bar, select Tools-Options-Advanced-General
    Select the configuration editor
    Promise to be careful
    Enter the following in the search field: print_printer
    When this line appears, right-click and select reset.

    See if she resumes the new default printer after you restart Thunderbird.

    No menu bar? Press the ALT key.

  • Whereis/how to find the function PRINT

    Cannot find the ' print' button in the header and Firefox toolbars. Where is he?

    It is in the Palette to customize.

  • How to change the default print settings

    My settings print continues to change 50% print size.  How to set the default value to 100%?

    Hello Bill,

    Thank you for using communities of Apple Support.

    It seems that what you want to do is to save your settings as a preset favorite. Not exactly define value by default, but easier than manually make changes every time you print. Take a look at this article to find out how that is done.

    OS X El Capitan: save your print settings to use later

  • How to analyze the data of 10 bytes encoded in the HH306 of Omegatte data logger/thermometer?

    I am trying to write a simple code for a HH306 of OMEGAETTE thermometer/ data recorder.

    That is the problem. I communicate with the device via RS - 232, using Labview 8.5.1 and windows xp. I ask her for "all the coded data", which is actually the only option. He returns 10 bytes of encoded data, the manual describes the meaning of each byte and I understand that. The problem is that I can't analyze the information for use in labview, for example: I want to extract the temperature and simply display it.

    on request, I get: 10bytes (read as a string from the serial port read buffer): display HEX: 02 00 A8 48 FF EF B6 49 B6 03 is perfect, and what I expect.     Display codes: \02\00\A8\B6H\FF\EF\B6I\03 The Normal display is a series of special characters, I don't understand, especially since I don't think they are ascii characters that must match returned hexadecimal numbers!   For the life of me, I can't understand how to extract the information (what are the 48 6 hexadecimal display) of what is returned. All string manipulation functions seem to work only on what is given in Normal view. (The 4th and 5th byte of the data are the codes of the BCD for temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).

    Can someone help me to analyze the data returned by this device?

    Ok... I think that I thought about it. I found this:

    I guess the normal display garbled is corresponding to each hexadecimal ascii characters. I'm just not used to seeing characters beyond the decimal number 127 ascii or hex 7F.

    So, basically, to analyze the 10 bytes of data:

    (1) break the string read from the serial port in the 10 ascii characters (using String subset vi)

    (2) son of each output string in the left input of 10 separate Type vi Cast.

    (3) wire a constant U8 in each terminal 'type' VI Type Cast.

    cables of 4) the chain of each Cast of Type vi output to the input of a number hexadecimal string vi.

    (5) concatenate or use as you wish as hexadecimal numbers (now in string format) which cause.

    See you soon.

  • How to analyze the data of the cDAQ and Signal Express, especially after analysis?

    In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

    How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

    For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

    Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

    I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

    Thank you for any assistance.

    Hi Patricia,

    "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!

  • How to install the allinone printer to scan x 360 HP envy

    Having a hard time trying to figure out how to connect my wireless printer all-in-one office jet HP 6700 to scan to HP envy x 360. where is the icon? How can I connect via wifi? IM t able print via wifi but its not finding for scanning.

    Hello @beachsunsand,

    Welcome to the forums of HP.

    I understand that you have a hard time getting all the features of your 6700 via your wireless network.

    I would like to help.

    On your windows computer 8.1 goto the office. Here, you should see an icon that looks like your printer.

    This will be the utility to toggle the scan of the computer.

    If you do not have this icon, called the wizard of the printer, then the full features software is probably not installed.

    HP Officejet 6700 Premium e-All-in-One Printer - H711n - software & drivers

    If you do not have the full software of features installed and is still having problems please let me know.

  • How to cancel the wanted print 4500

    want to 4500 - how to cancel a pending print job

    Hello @neilann,

    Welcome to the forums of HP.

    I understand that you would like to know how to cancel a pending print job.

    I would like to help.

    Depending on your operating system, do one of the following:

    ● Windows 8: point or click on the upper right of the screen to open the charms bar, click on the settings icon, click or tap on the Control Panel, then click or tap View devices and printers.

    ● Windows 7: from the Windows Start menu, click devices and printers.

    ● Windows Vista: on the Windows Start menu, click Control Panel, and then click Printers.

    ● Windows XP: in the Windows Start menu, click Control Panel, and then click Printers and faxes.

    Double-click your printer icon open the print queue.

    In the printer menu, click Cancel all documents or Purge Print Document and then click Yes to confirm.

  • Photosmart 7520: How to remove the default print on PS7520 settings

    I recently had a problem with a default setting of 2 copies. Can I change to 1 copy by simply changing the number 2 to 1. The next ime I just print a similar document, the default setting is back to 2 copies and I cannot remember how to remove the default settings.

    Any help will be appreciated.


    Hi @JoeAldrich,

    Welcome to the community of HP,

    I understand that you are having problems with the settings on your Photosmart 7520. I'll be happy to help you.

    Below, I've posted links of couple to some documents that should help you to solve this problem. Please read the documents carefully and let me know if your problem is solved.

    Printers HP Photosmart 7520 - copying Documents.

    Printers HP Photosmart 7520 - change default print settings

    If you still experience the problem, I would recommend trying to restore the default settings.

    Go to configuration > tools > restore default settings

    I hope this helps.

    If this help will testify of my answer by hitting the thumbs to the top slot

    Click on the button "Accept as Solution" if I helped you reach a solution.

Maybe you are looking for

  • How do I get back on my Google homepage?

    How do I get back on my Google homepage? I want to go back!

  • Newspaper printed in finger on the screen

    I'm trying to reinstall/repair the HP ProtectTools Security Manager on a laptop with OS Windows 7 Professional 32 bit 8440p. The log on screen for recording of the fingerprint for a Web site isn't appearing any more. I get the following message to ha

  • WebApplication that counts number of web pages in the Web site

    l want to make a webapplication in which can sweep (County), the number of Web pages on a Web site, and also displays the them.and, it should also display Web pages in language php also.

  • vRealize Automation API and HTTP-REST

    HelloManagement of the booking does not include the current version of the plugin vcac. I guess that because that is a new feature of vRA API.Can how I add vRA API as host HTTP-REST in Orchestrator? The problem is the permission based on tokens. You

  • Can someone help me with an image

    I would like to know if anyone can copy (Duplacate) this image. I need it for my church, but they don't seem to have a HQ one and its too small. If you can copy the image send me one. PSD file please. Thank you!