How to answer voice calls using built-in modem and dialer Windows in Vista Ultimate?

How can I answer incoming voice calls using Dialer Windows in Vista Ultimate.  I can make outgoing UST fine voice using Dialer calls, but I don't see any option to answer incoming calls.

Hi Dobrodaddy,

The option to receive calls through dialer.exe is not available in Windows Vista and 7, as it was in Windows XP. You can use a third-party software for this task.

Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Thanks and greetings

Ajay K

Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • How to handle asynchronous calls using OSB?

    Hello

    How to handle asynchronous calls using OSB?

    Please help me?

    -Vincent

    Hello friend, here is what you need.

    Oracle Service Bus, call asynchronous Web services | Oracle... Java... OpenSource... SOA

  • After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

    After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

    You can not

  • How can I enable AHCI in dv7 6199us? And install windows on a SSD?

    Hello!

    I got help.

    How can I enable AHCI in dv7 6199us? And install windows on a SSD?

    Intel based computers, like yours, are usually set to "RAID", which is a superset of "AHCI". Basically, if the BIOS won't let you choose between "IDE mode", "AHCI" and "RAID", leaving in the RAID led to you everything done "AHCI". In this case there is no need to activate the AHCI, as RAID will support an SSD anyway.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • How to make a call using the ip address

    Hello! I'm very new to telepresence system and wanted to know about calls of one endpoint (Te MX300) to another (Fe SX20) using their IP addresses (public or private). I saw in the configuration guide they make calls through IDs or URIS, and they need to guard/SIP proxy for that, but how can we establish the connection through their ip addresses without additional devices, of the right endpoints?

    Thank you

    Hi Zhomart,

    I assume you want to directly (without using the gatekeeper) call the other end points using the IP addresses.

    It's very simple.

    Use the remote control and punch in the IP address that you want to dial, make sure you only select as a H323 Protocol.

    The composed IP address should also be accessible.

    Kind regards
    Sagar

  • SPA-3102: how to fill the calls from SIP to PSTN and vice versa?

    Hello, since my ISP to my office blocked SIP ports, of I'll try and use it at home where the ATA works very well.

    If I call you ATA installed in my office in the United States (where there is no problem) to my ATA at home in India, I have how to route the call selectively to theFXS port or port FXO of the anti-terrorism Act in India? I I want to answer the call directly using the phone connected to the ATA instrument or make another local call out on the PSTN connection.

    TIA

    You get two accounts of Gizmo.  You put an account on the tab line 1, you put the other account on the PSTN line tab.  If you want to ring the phone attached to the SPA3102, you dial the account tab line 1.  If you want to get the tone to fill an outgoing line PSTN call, you call the account registered on the PSTN line tab.

  • How to get Skype calls to overlay full-screen games in windows 10

    Hi.Here is my problem: in Windows 10, while I'm in a game session full screen, if someone calls me on Skype, instead of a small window centered to answer the call on the current game I get a black screen. In windows 7, it wasn't the case, I could just answer of in the game, just by clicking on the small window that overlayied the game and continue playing happily. I know that it's more a problem of Windows 10, but if we could get Skype to work stacking game would be nice, especially since a black screen on you the current game session is very dissruptive.

    Well, I tried anyway, but I don't think it could be fixed, because in windows10 any notifications get you a black screen, in some cases, it crashes the game (all within a game fullscreen).

  • Using system recovery discs and now windows won't load.

    My computer crashed and I tried everything to get it running and backup. My desktop computer does start all the way to the top.

    The HP page will load, so I can use the f keys. When I run the diagnostic tools (f9) it test all memory, cpu, hardware ect and says it's fine.

    I reloaded Windows Vista off my system recovery disks, I did once I bought the computer. I had to do it every six months or more. Several times in recent weeks.

    It then goes to the windows error recovery page if I select one of the options, it is empty. It never makes it to the login page.

    HP Pavilion Elite m9252p

    Thank you

    There is no limit on the number of times you can use the recovery disks.  You must contact the manufacturer about the recovery process, as it is them and not Microsoft.  Each manufacturer does things differently and we don't have access to this information.

    In regard to the upgrade to Windows7, you must upgrade work install Vista system if it does not you will need to purchase a full retail copy of Windows7 and do a cleaning.  The problem is that you don't know if Windows7 is compatible with your system - and once you open the package the seller will probably accept returns.  It ' was a great risk to do this withour executes the first Windows7 Compatibiity advise http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx but if you have no access to your system you can't run it.  You can get in your system somehow?  Have you tried safe mode with networking (repeatedly press F8 during the boot process until the menu appears)?  If you can somehow get, run this check before considering the upgrade to Windows7.  You can also ask the manufacturer if your system is compatible with Window7 but they may or may not provide a correct answer.  The decision and the risk is all yours.

    The short answer is that you need to discuss this problem with the manufacturer and follow their advice.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Impossible to use the option on the new drive to vista ultimate

    I just rehad my PC rebuilt, and we have installed a home thjat vista was already installed on another computer to get going. As windows obviously won't turn on, I bought a windows vista Ultimate Edition I want to install. the installation screen won't let me not to upgrade, only to do a clean install, but I don't want to lose all my recently installed programs and settings. How can I do a simple upgrade to ultimate off this 64-bit disc?

    You must have a version of Vista enabled for upgrade of.

    Reinstall vista correctly > then upgrade.

    Or, if a COMPLETE Ultimate edition, do a clean install.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to make Conference calls using FaceTime

    I want to video chat with my two brothers... in New York, another in MY.

    Is this possible?  We all iPhones, but I'm the only one with a Mac.

    I'm used to be able to do this using iChat (the predecessor of iMessage).

    You can't do it with iChat, but you can talk to them two messages to group on.

  • How to call using JavaScript Gaussian blur filter dialog window? applyGaussianBlur() method does not call it.

    I used Copy the following code , but it does not cause the dialog box filter Gaussian Blur:

    var source_layer = doc.artLayers[0]
    source_layer.applyGaussianBlur (30)
    

    Explain to me, please!

    You must activate the dialog boxes, then turn off right afterwards

    app.displayDialogs = DialogModes.ALL;
    doc.activeLayer.applyGaussianBlur(30);
    app.displayDialogs = DialogModes.NO;
    
  • How long between the rejection for built for BlackBerry and the email explaining why?

    My transit application rejected built for Blackberry. The rejection shows the provider with a bubble next to the rejected link, while a few trips that will follow an email portal.

    How long usually for the email to arrive?

    I'm pretty eager to get on the program, but obviously I can't begin to address the issues of the examiner until the arrival of the enamel.

    I'm a little surprised that the e-mail does not turn off when the rejection probably the tester written their report on some tools and click on accept/reject and the e-mail goes out into the ether? Why would there be any delay?

    You can find useful BFB dedicated forum:

    http://supportforums.BlackBerry.com/T5/built-for-BlackBerry/BD-p/built_for_bb

  • How can I prevent anyone using a shared computer to open Windows Live Mail and see my email?

    We have a shared computer in our House running Vista Home Premium. When you open Windows Live Mail my email inbox is displayed. How can I prevent anyone who uses the computer to this opening program and see my email?

    The only way to do is to setup Windows user accounts for each user.  Other users cannot see what another user sees.

    Steve

  • How many times can I use my key product upgrade of windows 8?

    Hi, I have several computers and recently bought a record eight pro upgrade windows. How many times can I activate windows with my product key of windows 8?

    2. INSTALLATION AND USE RIGHTS.

    a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

    b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

    c. number of users. Except as provided in these license terms, only one user may use the software at a time.

    d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

    If you must purchase additional licenses:

    http://www.Windows.com/buy

  • How to view the swf using the full screen and redirecting to a url

    Hello

    I have 2 questions:

    Question 1 – I have a flash swf file and I want to display in the browser in full mode, which means it has to adapt the browser, I tried to add

    fscommand("fullscreen", "true");

    in the first image of a lyaer, but it does not work.

    Question 2 - How to redirect to another page at the end of the video swf, I tried to add:

    stop(); 

    navigateToURL( new URLRequest("*www.microsoft.com*"), "_self");

    in the last image but it does not work.

    Thank you very much for your assistance!

    Terry

    use:

    for an application without air, this should be in response to an intervention of the user (such as a mouse click).

    stage.displayState = "fullScreen";

    navigateToURL (new URLRequest ("http://www.adobe.com"), '_self');

Maybe you are looking for