How to apply the strategy of UCS1.4 collection (1 d)

Hi all

I try to collect statistics on the performance of the network. but do not know how to apply the policy to the collection.

Service profile, I cam see political Stats. But within the political framework of Stats, there are onlu available in config/choice is political threshold.

Can someone help out me? Thank you very much!

I think this is what you are looking for?

UCS stores the past 5 statistics records at the "Reporting Interval" setting;
There is no configuration to change that number.  You can put this interval out 8 hours but then you only get a snapshot every 8 hours. Trending or history retrieval would require an interval based extraction and storing application that utilizes the UCS XML API.

This is a link to the UCS XML API information.
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/api/ucs_api_book.html

Tags: Cisco DataCenter

Similar Questions

  • How to apply the strategy of fault at the level of partner link in SOA 11 g

    Hi all

    We have implemented political fault in SOA 11 g at the level of the process for the composite whole and it works fine. Failure for any distance invoke the attempts 3 times, and then if the error is still so he's going to manual recovery. As this is applied to the process level all calls within this composite will go to the fault distance default policy.

    But we have a scenario where we want to try again only for a particular parterlink in BPEL and the other called / parterlink inside the composite. We tried several ways, but none of them work . Can someone help us please to solve this issue... Any help to solve this is really appreciated.

    We tried things:

    1. in the composite.xml, we tried to put the property due to lack of policy inside the tag reference for which we want to try again

    < name = "oracle.composite.faultPolicyFile property" > oramds:/apps/test/faultpolicies/fault-policies.xml < / property >

    < name = "oracle.composite.faultBindingFile property" > oramds:/apps/test/faultpolicies/fault-bindings.xml < / property >

    2. We also tried to set this property in the binding.ws of a same reference tag. But none of these options worked.

    Is it possible that we use to make SOA 10 g by mentioning the name of parterlink? We cannot put this property at the level of the process and then it becomes applicable to all point to this composite.

    Thank you
    Anju

    Error binding using attach your policy due to lack of component individual. See the example below. Use the tag

    "xmlns ="http://schemas.oracle.com/bpel/faultpolicy"

    "xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance">".

    Component1

    Medias2

    HelloWorld

    ShippingComponent

    AnotherComponent ".

    creditRatingService

    anotherReference

    <>

    xmlns:credit ="http://services.otn.com" > credit: CreditRatingService.

    <>

    xmlns:DB ="http://xmlns.oracle.com/pcbpel/adapter/db/insert/" > db:insert_ ".

    PLT

    CreditRating3

  • How to apply the "Slate Pro Light" using CSS font?

    Hello

    Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

    Thank you.

    I usually use the definition of CSS of police-family at the following address on my html and body elements:

    font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
    

    Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

    font-weight: normal|bold|bolder|lighter|number|initial|inherit;
    

    In this case, lighter, might do the trick?

  • How to apply the theme of Oracle Alta UI in ADF

    Hi all

    I use Jdeveloper 11.1.1.1.7.2 release1.

    Can anyone provide your inputs on how to apply the theme of Oracle Alta UI in the ADF.

    For any consultation on Alta IU @ http://www.oracle.com/webfolder/ux/middleware/alta/start-develop.html

    Thank you and best regards,

    Miko Auntie.

    http://www.Oracle.com/WebFolder/UX/middleware/Alta/start-develop.html

    http://www.Oracle.com/WebFolder/UX/middleware/Alta/patterns/PageDesign.html

    http://www.Oracle.com/WebFolder/UX/middleware/Alta/new-dev-w-Alta-skin.html

    Oracle ADF: Customized design

  • How to apply the filter to a specific column condition, but not to the report?

    Hello

    I'm having a problem in the application of a filter to one of the column condition.
    I have a scheme with the table around 10 dimension tables and a fact. My requirement is to provide a count on the table of facts with associated with some other columns in the dimension tables.

    Lets consider a scenario with tables as sales (Fact), region (Dimension), Year (Dimension), Type of sale (Dimension).

    Now my requirement is to highlight the fields

    City (Region) - city
    Year-
    Sales Count (dirty table) - number of all sales of the fact table
    Sales Count (dirty table) - count of all sales of the fact which type of sale table is 'Cash'

    Here, my question is how to apply the filter condition of Sales Type = 'MONEY in' only on one of the Sales Count column that comes from the fact table. I want to be ordered for the fourth column, the filter condition.

    Can someone let me know how?

    Thank you

    You must do this:

    1) click the button column fx sales. (This procedure does than on fact, not attributes.0

    2) click on the filter button.

    (3) select the size of sales from the left Type "selection list."

    (4) in the filter window, enter CASH, and click OK.

    This will create one filter on sales 'use' size 'type sales' as the filter. It willl filter only to this column.

  • How to apply the mass PhysX to a w3d created with max

    Hell,

    I need to figure out how I can do to apply e.g. "mass" or "restitution" to some body created with 3d max and imported in Director w3d format.

    I know how to apply 'transform.position', 'transform.rotation' to a w3d created with max.
    and how to apply the mass and the return of an object that is created with lingo, but I do not know how to do mass a w3d created with max.
    Who is the syntax?

    Can you give me a hint?
    Thank you.

    It works for me :-)

    I sent you a private message.

  • How to apply the gradient to the entire page

    Hello

    Can someone tell me please how to apply the gradient to the entire page as a gradient background color.

    I tried for centuries and can not see the routes to apply background color

    any ideas? step by step please I really get lost because I'm new to Indesign and do not know the names of all the tools.

    Thank you

    If you want to this gradient to print (or export) with the page, and then you have to draw a rectangle and fill with the gradient.

    If you want on a number of pages, put the rectangle on a master page. You might want to add a layer and move it to the back, put the rectangle on that layer, then lock the layer.

    Dave

  • How to apply the AUTOFILTER on interactive report.

    Hello

    I'll have a report / form based on assume that the table EMP

    Page1 - Interactive (report)
    Page 2 - form

    report query-> select * from EMP;

    1 has created a new employee P2_EMP ('ABC') on page 2 and SAVE the record.
    2. as soon as I save the record on page 2, the control returns to Page1 (Interactive report)
    3. on page 1, all the Archives of the employees are displayed.

    What I want to, whenever I create a new employee P2_EMP = 'ABC' and SAVE the record, control on Page1 (Report) but only recording with employee P2_EMP = 'ABC', should be displayed on page 1...

    HOW can I achieve., I mean how to apply the AUTOFILTER on Page1 (interactive report)

    Currently, I have to manually apply the FILTER on page 1 (employee = ABC), I want to avoid.

    Thank you
    Deepak

    Hi Deepak,

    Could you have another element to the 1 'P1_NEW_EMP' page, pass this back into your branch when control passes from Page 2 to Page 1 and then put it as a condition of your report.

     select * from EMP
    where (employee = :P1_NEW_EMP or  :P1_NEW_EMP = '');
    
  • How to apply the constraint ONLY to new lines

    Hi, gurus:

    I have a question as follows:

    We need to migrate a legacy to a new production server system. I have to add two columns from each table to record that updates the row most recently through triggers, and I must ask constraint not null for columns. However, since the old system has already given for each table and old data have no value for 2 new columns. If we apply the constraint, all existing lines throws an exception. I wonder if there is possibility to apply the ONLY constraint to the new lines coming in the future.

    Thank you.

    Sam

    We need to migrate a legacy to a new production server system. I have to add two columns from each table to record that updates the row most recently through triggers, and I must ask constraint not null for columns.

    The best suggestion I can give you is that you ensure that the management of the documents on behalf of the person who came up with this requirement of brain hair so they can sufficiently punished for the huge waste of human and database resources they have caused for which they almost NOTHING got in return in the future.

    I've seen many systems over the past 25 years + who have added columns such as: CREATED_DATE, CREATED_BY, MODIFIED_DATE MODIFIED_BY.

    I have yet to see a system where this information is really useful for any real purpose. Many systems have the users/application schema, and users can change the data. In addition, a DBA can modify the data, and many of them can connect as long as the schema owner to do.

    Many tables also updated by other applications or processes of loading of bulk and these processes use generic connections that cannot be attached to any particular system.

    The net result is that these columns will be filled by user names that are completely useless for verification purposes.

    If a user is allowed to edit a table, they are allowed to modify a table. If you want to track that you need to implement a security strategy appropriate using the functionality of Oracle's AUDIT.

    Encumber ALL or even many of your tables with columns is a very BAD idea. Worse is the addition of doesn't trigger this server no other goal but captures the useless information, but because they are the impacts on performance just PL/SQL cause worse the total impact.

    Must certainly be to worry about security and auditability of your important data. But by adding columns and triggers, such as those proposed is NOT the right solution to achieve this security.

    Before your organization any decision so stupid you should propose that the same steps before adding this feature you should take before the addition of ANY structural MAJOR or the application:

    1. document the real need

    2 document and justify the business reasons for this need

    3. perform tests that shows the impact of this requirement on the production system

    4. determine the cost of the resources (people, storage, etc.) to implement this requirement

    5 demonstrate how this information will actually be used EFFECTIVELY for professional purposes

    With regard to points #1 and #2 above that the requirement should be noted with regard to the PROBLEM to be solved, not a some preconceived notion of the solution that should be used.

    Your org should also speak to other associations or other departments in your org even who have used your proposed solution and discover how useful it was for them. If you do this research, you may find it has not responded to their needs at all.

    And in your own org, there are probably some applications with tables that already have such columns. Has anyone here EVER used these columns and found them invaluable to identify and solve any real problems?

    If you can't use them and why first add their data to some important process?

    IMHO, this is a total waste of time and resources to add columns in your tables. Any such audit or security, at least, approach will be limited to those tables with key data that needs to be protected, and then only when you cannot implement the appropriate audit "best practices".

    A migration is hard enough without adding unnecessary additional expenses such as those. You have MUCH more important you can do with the resources that you have:

    1. capture all THE DDL for the existing system in a version control system

    2. train your developers on the use of the version control system

    3. determine the correct configuration of the new server and the system. It's almost a CERTAINTY that parameters will change and performance will suffer even if you don't think you have changed anything at all.

    4. validate that the data was migrated correctly. Which may involve a broad polling and comparison to make sure that the data has not been altered during migration. The validation process to a SINGLE TABLE is more difficult if the table structures are not the same. And they will not if you add two columns in each table; every single request, you do have to specify the columns by name in order to EXCLUDE from your two new columns.

    5. validate the performance of the app on the new system. He there will HAVE problems where things do not work as they did. You need to find these problems and fix them

    6 capture appropriate statistics after that data has been migrated and all indexes have been rebuilt.

    7 enter the new implementation plans to use a base for when things go wrong in the future.

    If it's worth doing is worth doing right.

  • How to apply the patch to power supply in an environment of dataguard

    I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

    Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

    In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

    To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

    1 reporter on the primary to the standby log shipping.

    2 cancel the MRP on the standby database.

    3. apply the patch of power supply on the standby server. -See the Readme for instructions.

    4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

    5. do not run any script correction on the standby database.

    6. apply the patch of power supply on the principal server.

    7. make sure that your primary database and the listener on the primary server is running.

    8 turn on the primary to the standby log shipping.

    9 start the MRP on the standby database.

    10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

    Please refer to this

    How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

    Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

    HTH

    -Jonathan Rolland

  • (JS) How to apply the existing paragraph styles to text in a textFrame

    @I have a definition called "Header" in my Document.

    How to apply this paragraph style "Header" textFrame selected with the text "This is my head" using JS

    Please advise...

    Thank you..

    @I have a definition called "Header" in my Document.

    How to apply this paragraph style "Header" in textFrame selected with the text "This is my head" using JS

    as directed by your initial thread in question that asked you to change only the text block selected, so I gave code such as

    myDoc1 = app.selection [0];

    but myDoc1 = app.activeDocument; lets you apply the styleforwholedocument

    FYI

  • How to apply the PSU on Oracle RAC?

    Hello guys,.

    How about the Oracle RAC database without any stop PSU? (patch only database, not clusterware).

    Lets say I have 2 CCR node on different hosts with separate houses oracle/grid (no shared resources). What are the steps to avoid blackouts? I simply apply the last OPatch on grid/oracle homes, and then generate the oracle user ocm.rsp file and simply run as root: opatch auto/patch/path /-oh oracle_home - ocmrf /path/ocm.rsp and he will do everything for me on this node? then move service on node patched and do the same on another node? Oh, and there will be no interruption of service? Thank you!

    Gytis

    Hello

    Yes, the concept of a rolling patch is that the DB will always be upward, albeit on a node or another (or maybe 2 of 3, etc.)

    Check out this doc, spec 14.2.4 reduce planned downtime Maintenance

    Essentially an instance will come down in time. You can either manually a node patch or another, or well let Oracle patch bearing (but make sure you test it in the configuration of test first, if you have one, or else we put up with the same group of patches just in case).

    The idea is that the VIP relocate Node2, or if you use SCAN apps will detect node1 down.

    If possible, it is good to do this with a team Apps - ask them to move the connection with Betclic / application servers to the next node in the cluster, then the first patch (rolling patch), then exchange all node1 and make the node 2.

    The same steps apply for clusterware.

    See you soon,.

  • How to apply the effect to multiply the (selected) sequence

    I have 1000 sequence with clips, and I need apply the string stabilizer.

    How do I do to encode selected (each sequence have 1 clip)

    Lates first cc 2015 using

    Hello

    Stabilizer of Warp is a clip based effect, you will not be able to apply it on a sequence.

    Stabilize the movement in Premiere Pro with the stabilizing effect of Warp

    Kind regards

    Ilyes Singh

  • How to apply the look across several clips

    In Adobe SpeedGrade, I look and I know how to apply it to a clip.  How to apply to multiple clips?

    If you're the direct link of first, I add an adjustment in the first layer and add the SpeedGrade LOOK to this adjustment layer.

    If you have something like a multicam editing, and all of your scenes are broken up, as in scattered amongst many other cuts, I do not add looks like this sequence. I add the LOOK to the source sequence.

  • How to apply the VMware-tools-linux - 8.3.2 - 257589.iso to ESXi 4.1 CD Version?

    Hi I'm new to ESXi. I downloaded the CD Version of ESXi 4.1 and installed chickadee on a server.

    When I tried to apply the VMWare Tools in a Linux guest I get error of vShere customer:

    ' / usr/lib/vmware/isoimages/linux.iso' not found

    • Need the ISO Image is not installed *.

    I searched the forums and found that VMWare-Tools are only in the DVD Version, but not in CD version

    to ESXi 4.1.

    In VMWare download area I found VMWare-Tools for Linux OSes', after the download, I get:

    Iso VMware-tools-linux - 8.3.2 - 257589.iso contains:

    VMWARETO. TGZ

    MANIFESTO. TXT

    How to apply this driver/patch my ESXi Server?

    Thanks for the help!

    With ESXi 4.1, you have an option for "Image CD VMware Tools for operating systems invited ISO Linux", for more information, please visit http://kb.vmware.com/kb/1024047

    Hope this helps!

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

    f 10

    VCP3, VCP4, HPCP, HP UX CSA

    http://KB.VMware.com/

Maybe you are looking for

  • Can I install 4 GB of RAM in a Satellite A200-1VP?

    Bought a 1VP A200 a few weeks ago and I think you, she might benefit from a bit more RAM. I am aware that under vista 32 bit I Wona? t have access to all 4 GB, but all I could win would be a bonus (3.5 GB?) 4 GB can be installed in my notebook with n

  • Satellite L500 - 'Boot from a hard disk BBS' shown at startup

    I have a Satellite L500, when to start it comes up with 'boot from a hard drive BBS' and that's where he stays. I tried to change the sequence of boot and startup speed. Could this be related material or the recovery disc won't work?Any ideas I can t

  • Recover files that were deleted from the Recycle Bin

    I need to recover a word file that has been deleted from the Recycle Bin.  An easy way to do this?

  • The KitKat update and battery drain

    I have searched on the internet and have not seen this problem yet with 7 from Dell venue.  Everyone knows of this update battery drain?  My Android operating system is sucking the life out of my battery since the big update.  I'm writing this, my ba

  • Online drawing circle does not not in OpenGL ES1.1

    In my project, I want to draw a line with a cirle of his corner side. But I do not get my desired output. Here is my sample code- glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); enable_2d(); glEnable(GL_BLEND); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MI