How to apply to market when the fact that the process?

Similar Questions

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• How can I buy status when he said that my country is not available? Buy at Amazon would solve this problem?

  How can I buy status when he said that my country is not available? Buy at Amazon would solve this problem?

  Adobe resellers http://adobedealreg.force.com/PartnerSearch?lang=en

  -http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

• How to get a popup when the device is plugged into the audio input jack?

  Original title - card Audio HELP

  I have a small problem that should be pretty easy to answer. A quick response would be nice. I'm new on Windows 8, and when you plug a device into the audio jack, a box used for poster asking which device is connected. Now that the box appears when I plug in a device. How do I get it to appear again? I have Windows 8, with player realtek HD audio. More info can be provided.

  Hello

  This problem can occur because of incorrect audio settings. Let's try a few steps to solve this problem.

  Method 1:
  As you use Realtek HD Audio, I would suggest trying the following steps and check if it helps.

  Enable auto-popup
  a. press the Windows key + X, choose Control Panel, select hardware and audio.
  b. scroll and select Realtek HD Audio Manager.
  c. click the icon for folder just above and to the right where it says analog panel back and just below the device's advanced settings.
  d. click Activate dialog popup automatically when the unit is plugged in.
  e. click OK twice.

  f. now, restart the computer and check the issue.

  Method 2:
  If the problem persists, I suggest you to set the headphone or speaker that you connect as a default value, and check if it helps.

  (a) right click on the volume icon in the system tray and then click on "recording devices".

  (b) right click on the space empty in the window pop up and then select "Show disabled devices" and "Show disconnected devices".

  (c) right click on the headset and then click on 'Activate'.

  (d) (d) mettre put out the microphone, then choose "set as default device".

  (e) click apply and Ok.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to make an end, when the last piece is finished

  IM new to Flash

  Can someone tell me how to end a puzzle game where the final piece of the puzzle is to / collides with the last location, he'll then a scene from new movie with a different major and a text like "you win."  Here is the code of action drag drop with no end I did a scene 2 and im planning to go to the scene 2 (the one with txt and new background) once the puzzle is completed. I don't know how to code, I copied all of this online tutorial which is great, but not end. Also, scene 2 I want to put a BACK button where it goes back to the scene 1 (solve the puzzle thingy).  Im still new and have no history proggramming, any help is appreciated. Thankx.

  piece1_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart1);
  function dragStart1(event:MouseEvent): void {}
  piece1_mc.StartDrag ();
  }

  piece1_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop1);
  function dragStop1(event:MouseEvent): void {}
  piece1_mc.stopDrag ();
  If (piece1_mc.hitTestObject (holder1_mc) == true) {}
  piece1_mc.x = holder1_mc.x;
  piece1_mc.y = holder1_mc.y;
  }
  }

  piece2_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart2);
  function dragStart2(event:MouseEvent): void {}
  piece2_mc.StartDrag ();
  }

  piece2_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop2);
  function dragStop2(event:MouseEvent): void {}
  piece2_mc.stopDrag ();
  If (piece2_mc.hitTestObject (holder2_mc) == true) {}
  piece2_mc.x = holder2_mc.x;
  piece2_mc.y = holder2_mc.y;
  }
  }

  piece3_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart3);
  function dragStart3(event:MouseEvent): void {}
  piece3_mc.StartDrag ();
  }

  piece3_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop3);
  function dragStop3(event:MouseEvent): void {}
  piece3_mc.stopDrag ();
  If (piece3_mc.hitTestObject (holder3_mc) == true) {}
  piece3_mc.x = holder3_mc.x;
  piece3_mc.y = holder3_mc.y;
  }
  }
  piece4_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart4);
  function dragStart4(event:MouseEvent): void {}
  piece4_mc.StartDrag ();
  }

  piece4_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop4);
  function dragStop4(event:MouseEvent): void {}
  piece4_mc.stopDrag ();
  If (piece4_mc.hitTestObject (holder4_mc) == true) {}
  piece4_mc.x = holder4_mc.x;
  piece4_mc.y = holder4_mc.y;
  }
  }
  piece5_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart5);
  function dragStart5(event:MouseEvent): void {}
  piece5_mc.StartDrag ();
  
  }

  piece5_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop5);
  function dragStop5(event:MouseEvent): void {}
  piece5_mc.stopDrag ();
  {if (piece5_mc.hitTestObject (holder5_mc) == true)}
  piece5_mc.x = holder5_mc.x;
  piece5_mc.y = holder5_mc.y;
  }
  }
  piece6_mc.addEventListener (MouseEvent.MOUSE_DOWN, dragStart6);
  function dragStart6(event:MouseEvent): void {}
  piece6_mc.StartDrag ();
  }

  piece6_mc.addEventListener (MouseEvent.MOUSE_UP, dragStop6);
  function dragStop6(event:MouseEvent): void
  {
  piece6_mc.stopDrag ();
  {if (piece6_mc.hitTestObject (holder6_mc) == true)}
  piece6_mc.x = holder6_mc.x;
  piece6_mc.y = holder6_mc.y;
  }
  

  
  }

  In each section test you if there was a shot, when a stroke occurs, you must remove to prevent event listeners which allows the object to process again and then increments a counter so that you can check if all parts are recorded as having been abandoned... example...

  outside any other code, declare the variable

  var plantedCount:int = 0;

  then inside you event handler functions do something like the following:

  If (piece1_mc.hitTestObject (holder1_mc)) {}

  piece1_mc.x = holder1_mc.x;

  piece1_mc.y = holder1_mc.y;

  piece1_mc. RemoveEventListener (MouseEvent.MOUSE_DOWN, dragStart1);

  piece1_mc. RemoveEventListener (MouseEvent.MOUSE_UP, dragStop1);

  plantedCount += 1;

  if(plantedCount == 6) {}

  Stop (1, "scene2");

  }

  }

  Note: When the code is repeated in modes such as yours the fact usually indicates the code can be condensed by making it more generic in which the same functions are shared by all the parts rather than having sets of functions dedicated to each piece.

• How to control automatic shutdown when the battery is discharged using Windows

  The laptop stops right in the Middle something without notice.

  Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

  I don't think that the cause of the problem is the power management because it is set to balanced.

  How can I control when the pc stops?

  Hello

  Usually, you can change these settings within the Windows power management.
  Using Win 7 or Win 8/8.1?

  Here is the Nice technical document about the features of Windows 7 power management
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Check the last option called: battery.
  It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

• How to change existing keywords when the site is not in the bookmarks bar?

  I've implemented several shortcuts keyword for sites that I use frequently. Now, how can I change the keywords or URLS when the site is not in the list of bookmarks? Is there a master file Firefox for these access which can be edited by the user? Or another way to get to them?

  Not sure if it's the same on Mac OS x, but it is how it is done under Windows and Linux versions of Firefox.
  
  Bookmarks > organize bookmarks
  
  Highlight the bookmark in the right pane, and then click more at the bottom to see the keywords and Description fields for this bookmark.

• How to stop a beep when the loop ends

  Hello

  I have a beep occurs inside a loop (which contains waves of data acquisition) to a certain threshold. I want the sound system for not introducing any delay in the execution of the loop.

  But I also have another beep when the loop ends. How to eliminate this noise?

  Your comments will be greatly appreciated. Thank you

  PI

  The obvious answer would be: remove the beep VI this is probably. Please show us your code.

• How to edit scanned documents when the output options are PDF files

  I have a printer of HP Photosmart Plus b209a-m.  How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?

  The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan.  But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.

  Thanks for your help,

  Jim

  JSD says:

  I have a printer of HP Photosmart Plus b209a-m.  How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?

  The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan.  But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.

  Software that comes with the printer HP Photosmart Plus B209a there OCR package in it. However, we can always install it by simply following procedure below:

  (1) perform a disk cleanup. (Start > all programs > Accessories > system tools > disk cleanup)

  (2) open the link below and save it on desktop OCR software

  FTP://ftp.HP.com/pub/Printers/ocragent/hpcom_OCR_140_003.exe

  (3) run the file after the download is complete.

  (4) if the error is displayed to indicate "this update does not support all of the HP device... ", do not close the message. It is very important.

  (5) open file folder

  (6) file open 7z

  (7) find the folder "ocr_web_pack".  Copy this folder on the desktop.

  8) click OK in the error message

  (9) open the "ocr_web_pack" file that is copied on the desktop and double-click "SETUP. "EXE" file

• How do I add text when the button is in short

  Hi friends,

  I am the third party application.

  This header contains the BitmapFields when the focus moves to this imageat the bottom of the image, I want to mention the name of the image.

  Please tell me how to do this.

  Thank you in advance.

  Hello

  The descriptor, you're trying to find is known as ToolTip.

  Try this link.

  http://supportforums.BlackBerry.com/rim/attachments/rim/java_dev/163809/1/ToolTip_1.txt

  Thank you

  Krishnan

• How to run an application when the cell phone is power on

  I want to run an application when the cell phone is power on. It runs in the background, how so, please give me a code, I don't know, thanks

  It is enough to set project properties in JDE as shown on the attached photo (check below: screenshot.png).