How to assign static ip to 1131AG Lightweight Access Point before register you for the controller

Similar Questions

• to convert 1142N AP autonomous lightweight access point

  Hello

  I have 4 1142N access points are all points of light access. Because I don't have a controller, I need to convert to standalone AP.

  I went through document cisco 1142, where it is mentioned that "the access point 1142 doesn't have the default IP address"

  I know procedure to convert offline in which I need to connect ap to the TFTP 10.0.0.1 with the ip address by default, but as for 1142, we do not have the default ip address. What is the procedure to convert offline?

  I have to assign a pool in one of the local switch and connect the ap to these switches with vlan, so she will receive the IP address of the DHCP server?

  But how can we without default IP address? I wonder about this...

  If I did not turn on where I can assign pool dhcp... what should I do?

  Please suggest me to convert 1142 standalone AP ap...

  I will be thankful to get the right answer...

  Hi Vinod,

  Here's the resolution...

  The image that is on the device's LWAPP, not the autonomous... If you want to use the AP in stand-alone mode, then the image must be W7...  It's...

  C1140-k9w7 - tar.124 - 21A .JY .tar not c1140-rcvk9w8 - tar.124 - 23c.JA.tar

  Please feel free to download any image from the below link and perform the conversion of image LWAPP to stand alone...

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

  the methos to convert is...

  Download TFTPd32 of google and install it on your PC... point of the image that you downloaded on the TFTP server.

  Connect a cable ethernet between your notebook and AP... both should be on the same subnet... Connect a cable from the console and access the hyperterminal console with the command... Make sure that you are able to ping the PC and AP and vice versa!

  AP > en

  AP #debug lwapp console cli or debugging console cli capwap

  T AP #config

  AP (confg) int FA 0

  AP(confg-IF) ip addr (same subnet as the laptop)

  End AP(confg-IF)

  Force - reload DOWNLOAD - AP #archieve sw / overwrite tftp: / /.

  Force - reload DOWNLOAD - AP #archieve sw / overwrite tftp: / /<10.0.0.5>/c1140-k9w7-tar.124-21a.JY.tar

  The above command will do it for you!

  Let me know if that answers your question...

  Concerning

  Surendra

  ========

  Please don't forget to rate the post if this has been useful for you or useful

• How to open 2 sites on start and 1 Web site when you click the home button?

  How to open 2 sites on start and 1 Web site when you click the home button?

  You can change your shortcut on the desktop Firefox with two starting URLS. To try:

  • Shortcut on the desktop: right-click on the icon, choose Properties
  • Icon taskbar pinned: clic click right on the icon, right click in Mozilla Firefox, click on properties

  Windows normally selects the shortcut tab. If this is not the case, go ahead and click on the shortcut tab.

  You will see the target highlighted. On 64-bit Windows, which is usually either not less the following:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
  

  For the specific shortcut launch pages, you can add them to the end, for example:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -url "http://www.dilbert.com/" -url "http://www.gocomics.com/pearlsbeforeswine"

  After OK'ing the Properties dialog box, you can test everything right now to confirm that Firefox is now launching a window with tabs. Either:

  • Double-click the shortcut on the desktop
  • right click on taskbar icon pinned, click Mozilla Firefox

  Who do you want?

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Hi, I have the 2014 package which includes lightroom and photoshop. Can I move to 2015 for free? If yes how can I do? My photoshop 2014 disappeared and its saying I have a 30 day trial for the 2015. Thank you for the help

  Hi, I have the 2014 package which includes lightroom and photoshop. Can I move to 2015 for free? If yes how can I do? My photoshop 2014 disappeared and its saying I have a 30 day trial for the 2015. Thank you for the help

  Yes, the upgrade is free. means that it is included in the subscription.

  
  

  You can install and activate one of these version according to your choice of 6 CS, CC, CC 2014 or 2015 CC

  If the CC 2015 looms as of the trial, please refer link below:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Let me know if you need more assistance.

  Also mention if you use Windows or Mac computer?

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.

• How can I import my old passwords of key3.db key3 and files for the new firefox signons.sqlite 41.0?

  I recently updated my PC and my old hard drive in system is placed as a slave in my new PC. Seen key3 and signons.sqlite key3.db files of the old firefox, how to import passwords saved in the new firefox 41.0?

  Thank you.

  How old was the older Firefox? Firefox 33 and then use this pair of files:

  • logins. JSON -. saved passwords.
  • signons3.txt - this file stores your database key for your passwords.

  If you want to move the old in your current profile (to replace new empty files for the most part), this is the fastest way to open your folder of the currently active profile. Either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename logins.json to something like logins.old and key3db to something like key3.old.

  Now copy the old two files in this folder.

  Launch Firefox back up again. These connections are available?

• How to use a date such as 'Today' in a function without listening for the moment on that date?

  I create a todo list. I know I shouldn't but I'm so stuck on this point that I really want to know the answer. At the bottom of my table, I have a footer line in which I want to show the total number of tasks to be accomplished today and every time that I have "TIC TAC" a box in one of the columns used for checking out my todos, I would like to see it reduced by 1. But apparently from what I found through experimentation is that the keyword 'Today' or a grammatical Word uses the date AND time and only if the time is 00:00:00 AM. So, how can I avoid the time to be included when you filter? I would use today, because then every day he restarts you automatically. Thank you for your time and effort in advance.

  Version numbers: 3.5.3.

  OS X: El Capitan 10.11

  Hi BassPlaya,

  What formula do you use in table leg?

  The NOW function would do what you want?

  

  Kind regards

  Ian.

• How can load us Adobe Flash. States of Flash is available here. for the Droid.

  Does anyone know how to get Adobe Flash for the Droid?  Adobe Flash says, download disp. for the droid.  Does Motorola need to send?

  I tried as well.  I think that the Flash Player can download after the release of the 2.2 version.

• How to assign a vlan per port cisco all point of access by wlc 702w 5508

  My environment have WLC 5508 and ap 702w 250 units in my site. I need on port port config example all the ap 702w 2 > Vlan 20 port 3 > vlan 30

  Now I canfig one by one.

  Please everyone tell me best way to config a time 250 units.

  Thank you very much...

  Here is the config CLI involved. If you have a list of your AP names you can config CLI of training for all your AP on Notepad & then configure this CLI

  config ap lan port-id  enable config ap lan enable access vlan   

  See this post for more details https://mrncciew.com/2014/09/26/702w-with-wlc-8-0/ HTH Rasika * Pls note all useful responses *.

• Provision of Lightweight Access Points

  Is there a way to provision LWAPs to be put on the network, so when they do they will be automatically assigned node name, address static IP & domain information?

  I need to install several 3500APs.  We use LAN 5508 controllers.

  Hello

  In short... 'Automatically' there is no way... we can do the same nmanually and here is the link...

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_tech_note09186a00808e2d27.shtml

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Thank you for the good program. I'm from Ukraine and you have changed the default Google search engine Yandex, a Russian. How can I get Google?

  I'm from the Ukraine. Firefox is the browser number one for me. I used to Google search in the address bar and now I have to use Russian Yandex. I don't want to use the Russian search engine. I know that there are research tools, but I like to use the address bar. How can I get Google? Thank you

  Hi, vmbr!

  I see if I can help.

• How can I display my contacts list to select a recepiant when you answer, the composition or the mail transfer?

  When I want to transfer or to respond to several contacts, I can't see the list of contacts. I'm sure it's a simple problem to solve, but I could use some advice on how to do... Thank you!

  When you're in an entry window, press F9. F9 Active / disable the sidebar of contact power on and off.

• How can I solve a problem witht my mouse pointer when it gets to the very big chance?

  When I use Firefox, at seemingly random times, my mouse pointer becomes suddenly extra-large. The only 'solution' that I found is to restart the computer.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.