How to boot from the CD of Win XP to install the OS on Satellite L

Similar Questions

• XPS 12 / Win 8: how to boot from the recovery partition / reinstall Windows?

  Messed up things on a newly purchased 12 XPS in Windows 8, and I want to boot from the recovery partition and reinstall windows.

  Support online pages point by pressing F8 during startup, but this does not at all.

  How can I access the recovery partition?

  To access to the menu of, , press F2.

  To enter the boot options menu, press F12.

  Because the XPS 12 boots so fast, it is better to repeatedly press F2 or F12 after restarting the machine. During the startup process, texts for options should appear at the bottom right of the screen. If you enter Windows, you will need to restart again and press F2 or F12 until it works. However, I don't think there is an option in the BIOS to restore the computer to its factory condition. The previous post by DELL-VIKRAM M describes how to properly restore the machine to its factory state.

• How to boot from the CD from Toshiba - Satellite 2450-101?

  Hello everyone,

  I would like to know how to start from the cd to install windows xp.
  I have a toshiba laptop (Satellite 2450-101).
  I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

  Kind regards
  Steve.

  Hello

  If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• How to force boot from the CDROM on Satellite M40 183

  I have error in the MBR on the drive in my laptop, it doesent from disk, before I had put into hibernation system (Windows XP).

  Now, I can't force boot from the CDROM
  in the bios, CDROM is selected as first boot-> nothing
  on bootking, I am pressing end F12 choose CDROM icons-> notking
  on bootking by pressing 'c'-> notking

  and I have a problem:
  -system does not boot
  -recovery disk will not start, and I can't fix it :/

  I'm sure that the cd drive is right.

  I recognized before, makes this hibernation, it is imposible to boot from the cdrom

  but there must be a way to force anyway.

  Thanks for any help.

  Mateusz

  Hello Mateusz

  The hibernation mode cannot be responsible for this kind of question. I'm sure that this option is properly put to the test and if there is some sort of suspicion it won't be available more.
  If you have any problem with MBR, it can also be damaged by some kind of virus. As far as I know that the easiest way to repair or rebuild MBR is to run the standard Microsoft called FDISK utility with a parameter/MBR, as
  A:\ > FDISK. EXE/MBR
  FDISK is a standard utility included in MS-DOS, Windows 95, 98, me.
  Please check this page http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkd_tro_evwd.asp Microsoft
  Good bye

• Booting from the recovery CD - Satellite Pro A100

  I have a laptop Toshiba Satellite Pro A100 & want to restore to the original settings.
  I backed up all my date & have the recovery CD - BUT can not get the CD load?

  Some please explain the procedure to boot from the CD?

  Thanks Scotto

  Start your laptop and press F12 immediately.
  When recovery media in the optical disc drive in the list of bootable devices.
  Choose the CD/DVD device in the list and confirm with the button ENTER.
  Follow the menu on the screen.

  That's all!

• Satellite 2400: How to boot from the CD-ROM PCMCIA?

  Dear all,

  I try to start from the PCMCIA - CD ROM because my DVD-ROM is not working. After you press the power and press F12, I chose PCMCIA but nothing happens. should I change something in the BIOS first?

  My laptop is Satellite 2400.

  Thank you...

  Hello

  I got this Toshiba FAQ document on the startup form of the PCMCIA reader.
  http://support.toshiba-tro.de/KB0/FAQ35005G002KR01.htm
  This article describes a seed on a protected unit but it s useful and you should check it out.

  In addition, you can check in the BIOS the option PC card. Try to change the mode of the CCIP Compatible controller or CardBus/16 bit and tries to start again the PCMCIA card.
  To change these settings, first change the configuration of device for all devices

• Yet Mini WT7-C-100 - how to boot from the boot of SD card

  Hello guys, I have toshiba still wt7-c-100 mini with 10 GB hard drive. My question is how I can install Android x 86 on this tablet, because when I attach my micro sd card (witch has an image burned to 4.4x86 android) does not appear in the start menu (when I press the button walk / stop and volume to the key).
  Can you tell me how to start menu see the micro sd card. Simply sdd/hdd in there.
  I look forward to receiving your responses! Thanks, have a nice day!

  Look at this article

  http://www.howtogeek.com/191054/how-...rating-system/

  and if it is not useful, try google to learn more. The question is do the bootable SD card, so that the Tablet acknowledges. If this is not the case, try a USB key.

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• A40-201: How can I boot from the CD?

  Hello

  Can someone tell me how I can configure this laptop to boot from the CD?
  I try to go into the bios, but this option is not available... I'm trying to press F12... but also unsuccefull...

  Tanks in advance...

  Hello

  -Put the CD in the drive.
  -Stop the laptop.
  -Then turn on the laptop and immediately the key C.
  Now, the laptop should boot from the CD.

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• Installation cd win7 on back (how to enable booting from the cd) - hp g6 2010ax Please HELP

  I have just recceived hp g6 2010ax about 1 hour ago. There FREEDOS is installed. I'm a noob and I do not know how to enter the BIOS and enable to boot from the cd on a machine BACK. I have the cd win7 so. When I turn on my laptop, it takes me to the screen where I choose the language

  ex: 0 for the English

  1 in french

  and at the end F8FF

  I pressed F8 to turn it on, but when I restarted my computer, it's "OFF" again. I still have the win7 cd in the cd drive. Can you please give me step by step instructions for the void how

  -Open the bios

  -Allow to boot from the cd.
  -first device boot is CD
  -Save and exit

  the laptop HP Pavilion G6-2010AX with FREEDOS. I need help!

  Hello

  Sometimes, as you have discovered, installing Windows 7 from a DVD can be a little difficult for various reasons. If you were able to boot from the Windows 7 DVD, then you did what you had to do.

  I highly recommend to use a support USB thumbdrive for fast and reliable Windows 7 installation. You will need a USB thumbdrive, which is 4 GB.

  You will need to create it with Microsoft on another PC that is running Windows 7 or 8 utiity. Download and run tool Windows 7 USB DVD Download from the Microsoft store.

  The download link and instructions is on the web page in the previous link. You will need your Microsoft Windows 7 DVD and license key (during the installation process of Windows 7).

  Best regards

  ERICO

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/