How to capture audio only video or only when you import images from the camera

Similar Questions

• How to apply audio and video transitions automatically when drop several clips to the timeline?

  If I remember OK, in first previos versions, it was possible to drag multiple Clips in the project area to the timelineand apply automatically audio/video transitions.

  It is possible to configure how many video images will overlap to a default value of transitions (and for audio, too).

  Is this possible in first CS6 to do the same thing?  Leave me a link to the documentation or a hint, how to get this thing done.

  I searched the documentation, but I have not found.

  Thanks for the tips.

  I believe that the function you are referring is automate to sequence. In CS6, it is in the project Menu. for those who use the CC, it's in the Clip Menu.

• When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

  It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

• How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro?

  I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0

  
  

  Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.

  
  

  How can I get this sorted out before, so I can export for the first?

  Thank you. Tom van den Dool
  

  Hi Tom,

  How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.

  Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• Not able to get sound in video (.wmv) file when you import video clips (.m2ts) to video recorder Cannon using Windows Live Movie Maker

  Unable to get sound when you import video clips (.m2ts) Cannon for Windows Live Movie Maker video recorder or on the video file (.wmv).  Does anyone have a suggestion as to how this can be done?

  Hi RichGraff,

  • You have sounds in the VCR of Canon?
  • Are you facing problem with this video or other videos as well?

  For now, I suggest to import the video clip in Windows Movie Maker, which is an application integrated into Windows Vista and check if you get its in.

  Reference:

  A problem of importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

  Import video, photos and audio on Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove an icon in offline mode when sd card removed from the drive

  I have an icon in offline mode on my photos in the Organizer 11 items after I remove the sd card in the reader

  You will need to leave the connected SD card if you want to change the images. The Organizer contains only thumbnails/previews.

  Otherwise to copy pictures to a folder on your hard drive; Turn off the SD card.

  You can import images into the folder on your C drive using:

  File > get Photos & videos > files & folders

• How to import images from the printer/scanner in Windows 8

  Windows 8 has a program to import images from a printer/scanner?

  Hi TEGKy,

  You can follow the steps described in the connection with the similar question.

  http://productforums.Google.com/Forum/#! 0Qc3joM8ZZU/picasa/subject

  http://forums.MacNN.com/t/299779/how-to-import-photos-from-scanner

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/import-pictures-and-videos-using-Windows-option/b4a82dce-7b52-4969-8af1-21eb71f160c7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/import-pictures-from-scanner/995b5888-cd9a-45A3-ACFF-044bec24ec0a

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-in-importing-pictures-into-Photo-Gallery/32e61751-4fb9-41e3-a4fe-8aaab9c1dee1

• How can I accept terms of use Live when you try to use the Windows 7 parental control features?

  * I have already connected to fss.live.com and https://familysafety.microsoft.com. This solution does not remedy the issue.* *.

  When you try to use the Windows 7 parental control features, it first asks you to connect to Live.  When I do, I get the 8004B3E9 error Code and it asks me to "connect to account.live.com and accept the terms of use.  However, in doing so, there are no terms of use for me to accept.  I also go to fss.live.come and familysaftely.microsoft.com and no option for the conditions of use is available to accept.  In addition, I tried different browsers.

  I can connect on Live.com and view my account easily, but without conditions of use prompt appears for me to accept, so my attempts to use the parental controls are stuck in this cycle, where it won't let me past without accepting conditions that do not seem to exist.

  How can I make sure I am set up as the account 'Parent '.

  Help, please

  3 hours later I'm finally able to access Family Safety. Thank you!

  The correct link to solve the "Terms of use" requirement is:http://g.live.com/0fsenus4/nexusmigrate

• How to capture audio only then separate each channel to use.

  Hi all, I spent time trying to find the answer before posting - but without success. Here's my work:

  My project is 1.5 hours long.  Inside the project, I have a clip of audio / 2 minute video that has music, I need. I want to export only the audio. After I do that, I want to take the second channel and use it for another project.

  I found the 'export' function and created an Aif file, but - instead of just the clip that I selected, it gave me audio of the entire timeline (huge).

  I tried also to the clip, simply select copy, then tried to 'stick' on my backup window, but it wouldn't let me.  I have to go to the source media to extract this clip again? is not supposed.

  advice on how to proceed? Thank you all!

  NAVE

  Alrighty nefl777, here's another way to do almost the same thing. This method is more faster/easier, if you do not need to use the clip exported in another project.

  http://screenr.com/qfI

• How to add photos only when someone click mouse in the box

  As in the thread.

  I want my picture that someone will see only when click a box on my site.

  You can create objects on the page, and then set the States, for example, insert a rectangle and set reports with the mouse to the bottom of the State, so that once the user clicks the rectangle, image used for the mouse to the bottom of the State will be displayed on the page.

  If this isn't what you are looking for, please let me know.

  Thank you

  Sanjit

• Since the last update when you import images directly into Lightroom, metadata display the correct focal length, but display no information of the lens, Lightroom reports only as "unknown lens", the news of the lens are in meta-data... whe

  Since the last update when importing image directly in Lightroom, metadata display the correct focal length, but will not display any information from the lens, Lightroom reports only as 'unknown lens', the info from the lens is in the meta-data... When you change an image in LR in PS then save, lens Info appears as if by magic. This is a problem of workflow for those who could use multiple lenses on a shoot... What is the status on this issue? I shoot with Nikon D800... thnx ted-lens-metadata-field-missing-on-import?topic-reply-list[settings][filter_by]=company_promo https://feedback.photoshop.com/photoshop_family/topics/camera-raw-9-5-lens-information-aux I posted this on FB with LIGHTROOM page, they instructed me to send you.  Needless to say that it is a huge problem for the workflow, and reduce my bright room isn't an option because whenever he do it takes two days to arrive, and I have no time to lose if I appreciate some type of response as soon as possible

  What is the status on this issue?

  The link you gave clearly indicates the status of this issue. Adobe is working on it.

• Problem reading video image from the camera IP Axis - confusion of variant data buffer.

  Hi there;

  I am writing a VI for an Axis IP camera.  He went to work, but I need to extract individual video stream images so I can overlay text using the functions of text IMAQ overlay.

  The thing is when I take a picture using the axis dll library (GetCurrentFrame), it returns a buffer size and a Variant representing the raster data.  The data is = 921 640 bytes representing a 40 byte header, and then the 640 x 480 x 3 raster data.  When I run the vi, I get a correct value for the size of the buffer (921 640) so I know it works.

  What don't understand me, it's the video image is placed in a buffer of type variant.   I don't quite know how to extract the raster data of the data type of "buffer" which is a type variant.  My apologies, I'm a bit ignorant in how to handle the types of "Variant".

  Does anyone have a suggestion?

  This is the VI

  Hi Peter,.

  Just to confirm, what IMAQdx version do you use?  You want to get the version 2010.3 since it is the latest version: http://joule.ni.com/nidu/cds/view/p/id/1641/lang/en

  The next issue would be that the Ethernet cameras discover is not necessary and that it is only used for GigE Vision cameras. The VI was named before IP camera support has been added and the name is unfortunately confusing now. In any case, the discovery of cameras takes place in the background and is automatic. The VI list must list your camera. It may be worth trying just to see if the camera appears in first MAX. Note that the IP camera must be installed on your local subnet, so it can be discovered.

  Regarding the examples, virtually none of the IMAQdx examples included in help-> find examples should work.

  Eric

• Video running backwards when you apply LUT for the film Red 6 k

  Video upsets when we apply the LUT at 6 k red footage. Any thoughts? Also LUTS are not accurate color. Do not know what is happening.

  It seems that I can't happen again. It's a knockout is more upside in gpu accel or only the software. I fixed what it is rather than specify the SG where were my luts, I took the lut and installed in lut speedgrade file. Now he put on backwards. Must be a bug when you point to a LUT folder.

  The much bigger problem I had from the beginning, it's SG slows its unusable with some of the main LUTS I use. I use LUTS OSIRIS a color vision and they totally paralyze SG. I will make a change and it takes about 2 minutes to see the change take effect. It also happened when I tried 2 TITAN gpu in my system with 6 GB of VRAM. This work immediately in Davinci Resolve but SG dislikes them. Any chance there is a way to solve this problem on your side or mine? I use these all the time.

• Scratchy Audio only when you use Windows media player

  For more than a month now, when I use Windows Media Player 11 to play any audio file, the music sounds saturated and rough. The volume is louder than normal. It is on a 5 year old XP PC, and I haven't added new software or hardware lately.  I can play the same files on the same PC with other readers multimedia (VLC Media Player or Quicktime) and I don't have this problem, and it's okay if I use headphones or speakers. I tried to uninstall WMP11, but WMP10 has the same problem, and when her reinstalled WMP11 still sounds bad. I have also reinstalled the codecs windows audio. Any ideas?

  Check the audio improvements and put them all turned off:
  Begin playing a file and then click the arrow below the now playing tab, point to enhancements, click show improvements and then go through each of the options.

  You can also check and disable plug-ins:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-plug-in-to-Windows-Media-Player

• Express Outlook XP email opens automatically even if they are spam. How to open emails only when you click it?

  Hello
  I use Windows XP. At the opening of the e-mail messages by using outlook express, e-mail open automatically, including spam emails. How can I put it as well as the emails I click Open and power safely delete spam emails?
  Thank you

  View | Page layout. Turn off the preview pane.