How to change a wireless network of hidden to non hidden

Similar Questions

• Change of wireless network card

  Greetings!

  Is there any document walkthrough that shows how to change the wireless network card in a X220T?

  Thank you!

  Rob

  @takosan,

  You can read through the maintenance manual Hardware for the X220T here

  http://support.Lenovo.com/en_US/guides-and-manuals/detail.page?docid=UM006561

  Please note that not all wireless network cards are supported. Some 3rd party WLAN cards are not recognized by the system.

  JMT

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• How to improve your wireless network?

  Original title: Network wireless adapter NIC Ethernet network device

  I have internet through Comcast wireless, but the range of the signal is terrible. Is there a way to improve the range? The appliance in our living room. I lose my connection if I go into our bedroom 15 "here or the kitchen which is about the same distance.  Can I buy a kind of "booster" or whatever it is that has expanded its range of access?  Thanks for your suggestions.

  Hi Laurie,

  Check out the following link. He detailed how to improve your wireless network.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=YldZ02rk3fd

  If you have any other questions, answer here and we will be happy to help you.

• How to change a unsecure network connection?

  My sister-in-law's computer connects to a wireless network that is not guaranteed... How to change t safe?  If I need to, with help, let me set up a new SECURE connection.  She scares me a little that she uses a non-secure network.

  Help, please...

  ~ Rosie ~.

  Because I'm not sure which router you have that's going to be quite general.

  Click Start, go in run, type "CMD" and in the command prompt, type "IPCONFIG" no citation.

  Find the address of a default gateway and enter this address in the address bar of your web browser. You will be asked to enter a user name and password. It is common that it is admin/admin, admin/password, admin/1234. After getting that distant and connected, an update so that we can better you go after knowledge that makes your router. If you happens to go there and feel comfortable going forward, look for the wireless settings tab and there should be a sub-category of security. Use WPA2-PSK, whatever you ask for password will be your new password in order to access your wireless network.

• E900 - how to change the wireless channel?

  Hello people!

  I just bought a router Linksys Cisco E900 and hooked it up to my cable Internet. The Internet service that gives me my ISP is PPPoE, fiberlink (100 Mbps).

  I did the whole upward. I've connected my computer (via Ethernet cable) and my laptop (via radio) to the router.

  Now... There are other networks wireless around me. The Wi - Fi channel that my fixed router 1 is apparently - he saw settings. But I can't find a menu anywhere in the gateway of the router (192.168.1.1) I can change the wireless channel bandwidth wireless etc. Can someone tell me if I can change them...? If so, how? If not... that the steering wheel...

  Thanks in advance.

  Check the screenshots below.

  

  

• How to change the public network to a network of home in 64-bit windows 7

  Windows 7 cannot access internet by WiFi card because the net work must be changed to a home network. How do I change, even the troubleshooting cannot make the change. How can I do it manually change it?

  Hello

  1. were you able to use the card wireless without any problem before?
  2. what exactly happens when you try to access the internet?
  3 did you recent hardware or software changes to your computer before this problem?

  Stage of change of the network location:

  a.Open network and sharing Center by clicking the Start button, thenControl Panel. In the search box, type network, and then clicknetwork and sharing Center.
  b work network, home network, or Public, and then click the desired network location.
   

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to view the wireless networks that are available in Windows 2000?

  Hello

  I'm still on windows 2000 on a laptop IBMT20. Don't laugh, it works well.

  I have an Aironet 340 pc card installed and it has no trouble automatically connect to the nearest wireless LAN.

  But under XP, there is a facility to display wireless networks and gives their status.

  How can I do this in Windows 2000? Is there a utility that I can download and install on W2K?

  Thank you

  Lawrence Slater

  NetStumbler. It's free. www.NetStumbler.com

  Good luck

  Scott

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• M1217nfw how to change a wireless Ethernet

  I have my printer M1217nfw configured to use the wireless network. Is there an easy way to switch to the use of the Ethernet cable rather... without uninstall/re-installing of all machines on the network?

  Hi @SlithyTove,

  I see by your post that you want to set up a wireless connection, Ethernet connection. I can help you with this.

  It is really not difficult to pass. Depending on your operating system, I can give you more detailed instructions.

  Restore the default settings of the printer. Go to configuration, network configuration, default restore.

  Connect the Ethernet to the printer to the router.

  Wait a minute and you should get a new IPV4 address assigned to the printer.

  Then, run the Windows printer Add Wizard or add the printer to the Mac from the windows printers and Scanners.

  On windows you can simply return the port to the new IP address also.

  Go to start, devices and printers, right click on the printer, go to the printer properties, select the ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• How to disconnect a wireless network?

  Original title: router security passwords.

  My PC connects to my neighbors router without password because he gave me last month. I want to disable this auto connect and erase the memory of the password of my settup.

  My PC connects to my neighbors router without password because he gave me last month. I want to disable this auto connect and erase the memory of the password of my settup.

  Here you go:

  Control Panel / Network and sharing Center / manage wireless networks / right click on the unwanted network / remove network

• NB200 (PLL20E) - How to activate the wireless network?

  Hi all

  Just got a NB200 PLL20E and the shortcut F8 key does not turn on the wireless LAN. I tried upgrading the BIOS (has been updated) and the driver Atheros... still no luck.

  Any thoughts?

  Hello!

  Normally on the NB200 wireless communication can be activated with the key FN + F8 combination * and * in the BIOS.
  Check it!

  Do you have the yellow exclamation marks in Device Manager and your wireless LAN card properly recognized?

  Can connect to a router?

  Good bye

• Is satellite C660 - 11 H - possible to change the wireless network card?

  Hi guys,.

  I'm looking to change the card Wifi on my C660 11 H since a Realtek 8188CE for a Realtek RTL8187B, for reasons that cannot be discussed on this forum. I was just wondering if the new card will be compatible, if I understand his also a Bluetooth card? I know that in the past, this is a case of grooving of the card and connecting the antennas.

  Finally, can anyone provide me the model number of the integrated Realtek WAN adapter? In system information, he simply says Wan Adapter PCI-E FE?

  Thanks for your help / Ryan

  Hey,.

  To be honest, it would be interesting to know why you want to change the WLAN card. You are not satisfied, or what are the reasons for this?

  In the forum, there are some discussions on the WLAN on Satellite C660 questions but this could be solved with latest Realtek driver and turning off energy saving as you can in large number of discussions:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=58756
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58733
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58481

• How update you the wireless network card

  My WLAN continues to stop. What should I do

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  For more information:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Suddenly can't connect to the wireless network: limited connectivity or none, I tried to bugs, no help!

  I have a laptop with Windows Vista. Recently, I upgraded my home wireless internet connection, which meant the laptop could go online (previously I had just used online office). It worked very well without any problems, until I enabled him to download updates windows (don't know if it was a service pack or only some updated files). Now, I am no longer able to connect, I don't always get limited connectivity or none even if the wireless signal is "excellent". I tried 2 ' difficulty his "from microsoft, including TCP/IP, no effect. I tried to turn off my IPv6 setting, no effect.

  I am considering currently switch to XP Pro, even though I grew to like the 'look' of Vista, so it would be a shame. But I have to be able to get the laptop online!

  Any help gratefully received... I'm not very tech-savvy so I need the stupid version :)

  Thank you

  Hello

  Try to clean the Wireless Manager so there is not more entries and try connection toyaspin

  http://www.ezlan.NET/Vista/wireless_manager.jpg

  If you have to connect to the wireless router, make a thread connetion disable wireless security on and try to connect again.

  Jack-MVP Windows Networking. WWW.EZLAN.NET