How to change AnyConnect VPN remote to complete the split tunnel tunnel?

I couldn't find an answer through the config of the SAA in the Cisco documentation and using Google.  To activate the complete tunnel for the AnyConnect client group policy, I just need to change the policy of Tunneling split to all networks of tunnels and set list of network voice against zero, if I want someone who connects with the AnyConnect customer to guarantee mobility to use internet corp pipe?

Who, more you will also need a NAT nat rule VPN pool meets the ASA outside interface (or if address / hen you normally use for dynamic NAT).

There are a few good examples with illustrations in this document.

Tags: Cisco Security

Similar Questions

  • We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

    We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

    Thank you so much: D

    ON both phones, check the settings > phone > call on other devices > Off.

  • How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

    Dear all

    How to create a VPN file .pcf for the CISCO VPN CLIENT software profile

    Concerning

    Hi Imran,

    Can't do much about that because it depends on what authenticate you the VPN server and how the settings. But let me introduce you to the memory layout. Once you install and open a VPN client. Press it again and it opens up a new page for the VPN config.

    Example of configuration as it is attached. But it differs depending on the configuration of your vpn server.

    Once you create and save this profile. Your FCP file is stored.

    Please assess whether the information provided is useful.

    By

    Knockaert

  • How to change or remove a document from the document library

    How to change or remove a document from the document library?

    Hello Cpni74876966,

    You can remove the document from the library by clicking on the tab manage and scroll down to the library and document simple click and right click Delete icon.

    -Usman

  • How to add an external IP address to a split tunnel?

    Hello

    I've set up VPN access on my ASA box as customers use a split tunnel so that only on our internal network traffic through the tunnel. Now, I need to add an external IP address to this tunnel. Is this possible, and if so, how can I achieve that? Just add the address to the list of tunnel network does not; If I do this, the client cannot connect to the external address at all.

    Can anyone help?

    Cheers, Georg.

    Hello

    Will need to see some configurations.

    Usually incoming VPN traffic bypasses ACL interface. If you have the default setting, you will need to allow traffic to the pool/subnet VPN server. Unless of course the server already has a rule that allows traffic to a "some" source address.

    Also a likely problem may be your NAT configuration.

    The local IP address of the server the public IP address is included in the current NAT0 configurations for the VPN connection? If yes then which will probably cause problems for connections to its public IP address. Traffic could be abandoned due to a RPF NAT audit that basically checks the NAT that corresponds to the traffic in the opposite direction.

    Therefore to confirm the above things, or share configurations, then we can do it.

    To my knowledge by adding the address IP of the Split tunnel should naturally also be taken.

    EDIT: The number of the station 6000

    -Jouni

  • Internet access from the default remote gateway? NO SPLIT TUNNELING

    I am facing a problem for a long time, I have an ASA5505 I went through a lot of config and research until I got the inside interface to be able to go to the internet; However my VPN clients are unable to go to the Internet. Now, here's the network config:

    -J' have a router (which is a modem and a router and an AP) 3 in 1... This router is connected to the ISP with a coaxial cable. the Interior is 192.168.0.0/24 network.

    -L'ASA is connected to rotate inside the network of its ' outside the interface.

    -L' SAA within the 192.168.1.0/24 network is a configured static gateway already (which is the router) outside the int > default gateway 192.168.0.1 (which is the internal IP address of the router).

    -Inside the ASA computers are able to connect to Web sites (but I can't do anything outside the network of CMD PING)!

    -When a VPN cleint to connect using IPsec (without certificate) by using a Cisco VPN client software, the client can ping and do the remote desktop connection with computers on the same within the network (192.168.1.0/24) but can not pass the Internet even know that other computers on the network can go to the internet.

    -One of the computers on the network (the inside network) is a DC server 2008 R2 which can go to the internet, as I mentioned above.

    What I'm trying to do is have the VPN clients to be able to go to the internet with the help of which the ASA inside the NETWORK card as a default gateway (192.168.1.1), I already have the VPN configuration with the name of the group, preshared key, user name and password and without the split tunneling (which is what I want)

    Thank you

    Hello

    The most common problem by getting ICMP to work through the ASA failed ACL or the ICMP Inspection rules.

    Check your configurations of current ' policy-map ' on the SAA with the command

    See the race policy-map

    I assume you have the default configurations 'policy-map' on the SAA, that are attached to the global

    Under ' policy-map ' configurations, you should see several 'inspect' commands. Pass under the correct configuration mode (where the current commands are found) and add the following

    inspect the icmp

    inspect the icmp error

    Then retest the ICMP through firewall.

    In regards to the VPN Internet traffic, we would need to know the level of Software ASA which you can check with the command 'show version'

    You must first verify that you have this command

    permit same-security-traffic intra-interface

    This will allow the traffic to the VPN users access the interface ' outside ' of the ASA, get PATed and then leave again through the ' outside ' interface. Without the command above it will not work. Will never go the VPN Internet user traffic through the interface "inside" of your ASA.

    Then, you will also need the dynamic configuration PAT for your VPN users, so they are translated at the same IP address that users of LAN behind the ASA. This format of configuration depends on the software level, that I mentioned above

    On a SAA running 8.2 (or below) you would usually have this configuration

    Global 1 interface (outside)

    nat (inside) 1 0.0.0.0 0.0.0.0 (or the mentioned specifically LAN)

    To activate the dynamic PAT for VPN users that you would add

    NAT (outside) 1

    On one ASA 8.3 running (and above) you can configure the dynamic PAT for users of VPN in the following way

    network of the VPN-PAT object

    subnet

    dynamic NAT interface (outdoors, outdoor)

    It should be. Of course, you could have a configuration that may replace it, but I doubt it.

    Hope this helps

    -Jouni

  • ASA 5512 Anyconnect VPN cannot connect inside the network 9.1 x

    Hello

    I'm new to ASA, can I please help with this. I managed to connect to the vpn through the mobility cisco anyconnect client, but I am unable to connect to the Internet. the allocated ip address was 172.16.1.60 and it seems OK, I thought my acl and nat is configured to allow and translate the given vpn ip pool but I'm not able to ping anything on the inside.

    If anyone can share some light... There's got to be something escapes me...

    Here's my sh run

    Thank you

    Raul

    -------------------------------------------------------------------------------

    DLSYD - ASA # sh run

    : Saved
    :
    ASA 9.1 Version 2
    !
    hostname DLSYD - ASA
    domain delo.local
    activate the encrypted password of UszxwHyGcg.e6o4z
    names of
    mask 172.16.1.60 - 172.16.1.70 255.255.255.0 IP local pool DLVPN_Pool
    !
    interface GigabitEthernet0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/1
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/2
    Post description
    10 speed
    full duplex
    nameif Ext
    security-level 0
    IP 125.255.160.54 255.255.255.252
    !
    interface GigabitEthernet0/3
    Description Int
    10 speed
    full duplex
    nameif Int
    security-level 100
    IP 192.168.255.2 255.255.255.252
    !
    interface GigabitEthernet0/4
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet0/5
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    management only
    nameif management
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    boot system Disk0: / asa912-smp - k8.bin
    passive FTP mode
    clock timezone IS 10
    clock daylight saving time EDT recurring last Sun Oct 02:00 last Sun Mar 03:00
    DNS lookup field inside
    DNS domain-lookup Int
    DNS server-group DefaultDNS
    192.168.1.90 server name
    192.168.1.202 server name
    domain delo.local
    permit same-security-traffic intra-interface
    network dlau40 object
    Home 192.168.1.209
    network dlausyd02 object
    host 192.168.1.202
    network of the object 192.168.1.42
    host 192.168.1.42
    dlau-utm network object
    host 192.168.1.50
    network dlauxa6 object
    Home 192.168.1.62
    network of the 192.168.1.93 object
    host 192.168.1.93
    network dlau-ftp01 object
    Home 192.168.1.112
    dlau-dlau-ftp01 network object
    network dlvpn_network object
    subnet 172.16.1.0 255.255.255.0
    the object-group Good-ICMP ICMP-type
    echo ICMP-object
    response to echo ICMP-object
    ICMP-object has exceeded the time
    Object-ICMP traceroute
    ICMP-unreachable object
    DLVPN_STAcl list standard access allowed 192.168.0.0 255.255.0.0
    Standard access list DLVPN_STAcl allow 196.1.1.0 255.255.255.0
    DLVPN_STAcl list standard access allowed 126.0.0.0 255.255.0.0
    Ext_access_in access list extended icmp permitted any object-group Good-ICMP
    Ext_access_in list extended access permitted tcp dlau-ftp01 eq ftp objects
    Ext_access_in list extended access permit tcp any object dlausyd02 eq https
    Ext_access_in list extended access permit tcp any object dlau-utm eq smtp
    Ext_access_in list extended access permit tcp any object dlauxa6 eq 444
    Ext_access_in access-list extended permitted ip object annete-home everything
    pager lines 24
    Enable logging
    asdm of logging of information
    MTU 1500 Ext
    MTU 1500 Int
    management of MTU 1500
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 713.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (Int, Ext) static source any any destination static dlvpn_network dlvpn_network non-proxy-arp
    !
    network dlausyd02 object
    NAT (Int, Ext) interface static tcp https https service
    dlau-utm network object
    NAT (Int, Ext) interface static tcp smtp smtp service
    network dlauxa6 object
    NAT (Int, Ext) interface static tcp 444 444 service
    network dlau-ftp01 object
    NAT (Int, Ext) interface static tcp ftp ftp service
    Access-group Ext_access_in in Ext interface
    Route Ext 0.0.0.0 0.0.0.0 125.255.160.53 1
    Route Int 192.168.0.0 255.255.0.0 192.168.255.1 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    AAA authentication enable LOCAL console
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    LOCAL AAA authentication serial console
    the ssh LOCAL console AAA authentication
    http server enable 44310
    http server idle-timeout 30
    http 192.168.0.0 255.255.0.0 Int
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
    Crypto ipsec pmtu aging infinite - the security association
    trustpool crypto ca policy
    Telnet 192.168.1.0 255.255.255.0 management
    Telnet timeout 30
    SSH 192.168.0.0 255.255.0.0 Int
    SSH timeout 30
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    No ipv6-vpn-addr-assign aaa
    no local ipv6-vpn-addr-assign
    management of 192.168.1.2 - dhcpd address 192.168.1.254
    enable dhcpd management
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    NTP server 61.8.0.89 prefer external source
    SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
    WebVPN
    port 44320
    allow outside
    Select Ext
    AnyConnect essentials
    AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal GroupPolicy_DLVPN group strategy
    attributes of Group Policy GroupPolicy_DLVPN
    WINS server no
    value of server DNS 192.168.1.90 192.168.1.202
    client ssl-VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list DLVPN_STAcl
    delonghi.local value by default-field
    WebVPN
    AnyConnect Dungeon-Installer installed
    time to generate a new key 30 AnyConnect ssl
    AnyConnect ssl generate a new method ssl key
    AnyConnect ask flawless anyconnect
    encrypted vendor_ipfx pb6/6ZHhaPgDKSHn password username
    vendor_pacnet mIHuYi1jcf9OqVN9 encrypted password username
    username admin password encrypted tFU2y7Uo15ahFyt4
    type tunnel-group DLVPN remote access
    attributes global-tunnel-group DLVPN
    address pool DLVPN_Pool
    Group Policy - by default-GroupPolicy_DLVPN
    tunnel-group DLVPN webvpn-attributes
    enable DLVPN group-alias
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the netbios
    Review the ip options
    inspect the ftp
    inspect the tftp
    !
    global service-policy global_policy
    SMTPS
    Server 192.168.1.50
    Group Policy - by default-DfltGrpPolicy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:67aa840d5cfff989bc045172b2d06212
    : end
    DLSYD - ASA #.

    Hello

    Add just to be sure, the following configurations related to ICMP traffic

    Policy-map global_policy
    class inspection_default
    inspect the icmp
    inspect the icmp error

    Your NAT0 configurations for traffic between LAN and VPN users seem to. Your Split Tunnel ACL seems fine too because it has included 192.168.0.0/16. I don't know what are the other.

    I wonder if this is a test installation since you don't seem to have a dynamic PAT configured for your local network at all. Just a few static PAT and the NAT0 for VPN configurations. If it is a test configuration yet then confirmed that the device behind the ASA in the internal network has a default route pointing to the ASAs interface and if so is it properly configured?

    Can you same ICMP the directly behind the ASA which is the gateway to LANs?

    If you want to try ICMP interface internal to the VPN ASA then you can add this command and then try ICMP to the internal interface of the ASA

    Int Management-access

    As the post is a little confusing in the sense that the subject talk on the traffic doesn't work not internal to the network, while the message mentions the traffic to the Internet? I guess you meant only traffic to the local network because you use Split Tunnel VPN, which means that Internet traffic should use the VPN local Internet users while traffic to the networks specified in the ACL Tunnel Split list should be sent to the VPN.

    -Jouni

  • How can I place a remote url in the TOC?

    Hello

    We were recently customization of icons for our release of WebHelp and discovered the ability to customize an icon for URL remotely. It is located by navigating to the skin Editor:

    WebHelp Skin Editor/Navigation/Remote URL

    It was easy to change the icon. But I can't understand how place you such a remote URL so that it appears in the hierarchy of the book and the table of contents? I tried to put in the HTML files in the pod project manager, but don't see any possibility to do it like that.

    Impossible to anyone please share how this is done?

    Thanks in advance,

    Douglas

    If you open the TOC pod, there is a button to add a new table of contents page. In the dialog box that appears, you should be able to define a URL rather than a project topic.

    HTH,

    Amber

  • How to change admin password in BIOS if the old password is forgotten in windows xp?

    Can you tell me how to change the admin password in the BIOS under Windows XP if I forgot the original?

    Thank you.

    If you have a desktop PC, you can disconnect the power cable, open the case and remove the battery (Silver thing small round-shaped piece). then try to restart the computer, you can disable it in the first black screen with white text, it will probably give an error of the BIOS in any case. Then disconnect the power supply again and replace the battery. You need to reset the BIOS, but it should work.

    If it's a laptop is more complicated and you probably need a technician, you will need a few contacts on the motherboard to short and it's not just a deal to open a plate of control over some.

  • How to change a default program to open the file instead of Widnows Media Player

    Original title: Media Player

    Windows Media Player opens many of my files (which in fact cannot be opened).  What can I do to make the Media Player ceases to be the default to open my files?  I can't even open Internet Explorer because Media Player wants to open.

    Hello

    By the description, I understand that Windows Media Player is been activated as default program to open all the files.

    You can change (set another program as default) your default program following the steps mentioned below:

    1. open default programs by clicking the Start button, click default programs.
    2. click on associate a type of file or Protocol with a program.
    3. click on the file type or protocol that you want the program to act as the default value.
    4. click on the change agenda.
    5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programs or your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)

    For more information, please visit the link below:

    Change the programs that Windows uses by default


    https://support.Microsoft.com/en-us/help/18539/Windows-7-change-default-programs

    Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

  • How to change your membership once you move the country?

    Hi, I moved to the United States a year ago in the United Kingdom. I started my membership CC to the United Kingdom, just before I moved (I didn't know I was going to) and I always pay each month on my UK account and want to transfer the membership to the United States, how can I do this? Thanks for the help!

    Hi, Fabien,

    Subscription cannot be transferred from one account to another.

    In this case, please create a new account with a U.S. address and place a new order. We will cancel your existing subscription that has been placed with UK address order.

    Thank you!

  • Impossible to access them Internert through the split tunneling VPN client.

    I divided tunnel configured on a PIX 515. The remote VPN client connects to the PIX very well and can ping hosts on the internal network, but cannot access the Internet. Am I missing something? My config as shown below.

    In addition, I don't see the routes on the VPN client via statistics (screenshot below)

    All opinions are appreciated.

    Rob

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    8.0 (3) version PIX

    !

    hostname PIX-to-250

    enable the encrypted password xxxxx

    names of

    !

    interface Ethernet0

    nameif outside

    security-level 0

    IP address x.x.x.250 255.255.255.240

    !

    interface Ethernet1

    nameif inside

    security-level 100

    IP 192.168.9.1 255.255.255.0

    !

    XXXXX encrypted passwd

    passive FTP mode

    DNS domain-lookup outside

    DNS server-group Ext_DNS

    Server name 194.72.6.57

    Server name 194.73.82.242

    the LOCAL_LAN object-group network

    object-network 192.168.9.0 255.255.255.0

    object-network 192.168.88.0 255.255.255.0

    Internet_Services tcp service object-group

    port-object eq www

    area of port-object eq

    EQ object of the https port

    port-object eq ftp

    EQ object of port 8080

    port-object eq telnet

    the WAN_Network object-group network

    object-network 192.168.200.0 255.255.255.0

    ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field

    ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper

    ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services

    access-list extended ACLIN all permit icmp any what newspaper echo-reply

    access-list extended ACLIN all permit icmp any how inaccessible journal

    access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time

    Comment by split_tunnel_list-LAN Local access list

    split_tunnel_list list standard access allowed 192.168.9.0 255.255.255.0

    access-list extended SHEEP allowed object-group ip LOCAL_LAN 192.168.100.0 255.255.255.0

    pager lines 24

    Enable logging

    Outside 1500 MTU

    Within 1500 MTU

    IP local pool testvpn 192.168.100.1 - 192.168.100.99

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list SHEEP

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Access-group ACLIN in interface outside

    ACLOUT access to the interface inside group

    Route outside 0.0.0.0 0.0.0.0 195.171.252.45 1

    Route inside 192.168.88.0 255.255.255.0 192.168.88.254 1

    Route inside 192.168.199.0 255.255.255.0 192.168.199.254 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout, uauth 0:05:00 absolute

    dynamic-access-policy-registration DfltAccessPolicy

    Enable http server

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-3des esp-sha-hmac Set_1

    Crypto-map dynamic outside_dyn_map 10 game of transformation-Set_1

    life together - the association of security crypto dynamic-map outside_dyn_map 10 seconds 280000

    Crypto-map dynamic outside_dyn_map 10 the value reverse-road

    outside_map 10 card crypto ipsec-isakmp dynamic outside_dyn_map

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 43200

    crypto ISAKMP policy 65535

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    a basic threat threat detection

    Statistics-list of access threat detection

    internal testvpn group policy

    attributes of the strategy of group testvpn

    Protocol-tunnel-VPN IPSec

    Split-tunnel-policy tunnelspecified

    name of user testuser encrypted password xxxxxx

    type tunnel-group testvpn remote access

    tunnel-group testvpn General-attributes

    address testvpn pool

    Group Policy - by default-testvpn

    testvpn group of tunnel ipsec-attributes

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    inspect the icmp

    !

    global service-policy global_policy

    context of prompt hostname

    Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e

    : end

    # 250 A - PIX

    You have not assigned the ACL split tunnel to your strategy.

    PLS, configure the following:

    attributes of the strategy of group testvpn

    value of Split-tunnel-network-list split_tunnel_list

  • 2 VPN remote sites can communicate by tunnel via a mutual 3' rd PIX?

    Hello

    I have a client who has a PIX 515E in the P.C. of the company and s 2 PIX 501 at remote sites. As of today the distance 2 PIX have a VPN connection from site to site with the HQ PIX.

    My question is... is - it possible to have the HQ PIX act as a virtual private network 'hub' for remote to communicate across sites? I mean, it is, is it possible to configure the PIX so that traffic to the site remote B can go into the tunnel at HQ, and then through the tunnel to the remote B site?

    If this is possible, how? The HQ PIX would have enough information to route packets in the proper way? What should I do?

    Thank you in advance to those who will answer. :-)

    If the question is not too clear, please post here and tell me...

    Steffen

    Steffen,

    Unfortunately, the answer to that is no the PIX not "redirect" return packages the same interface, where they were received. This is normal and is part of the security on the PIX algorithm. The VPN 3000 and IOS will do this, but not the PIX.

    However, as a workaround, can not only create another tunnel on the 2 rays to another? In other words, Setup a 'triangle' of sorts. That's usually what we suggest in situations like this.

    I hope this helps.

    Scott

  • How to change permission to all users in the custom dashboard

    Hello

    I created the new personalized dashboard I want to give access to my colleagues to give the permission to change. Please let me know how to do this?

    Thank you

    Vivek

    Hi Vivek-

    Is it a dashboard drag-and - déposer? If so, open the right in Foglight pane, click the general tab, and then click Properties,

    then click on change the basic properties. Change the setting of relevant role, and then click all the checkboxes you see. That should leave no matter what other Foglight regardless of role or permission, users have access to your dashboard. It must be visible when they connect a field in the left navigation pane called "other users Dashboards."

    I hope this helps.

    Robert Statsinger

  • Anyconnect VPN with machine in the field

    Hello people,

    I would like to set up my vpn to recognize and allow to connect to the VPN only if the computer is a member of the domain (AD).

    Is it possible?

    How can I do?

    OBS: My VPN have a DAP configured to recognize the members of the group in the ad (users)

    Thank you

    Marcio

    Hi Marcio,

    I see, okay in this case is what you want to deploy HostScan so it can analyze endpoint to connect to the ASA. This analysis report will be sent to the ASA and you can create DAP strategies against certain attributes that allow the connection. Once you have applied the DAP you want to allow, and then you must set the value by default DAP end connections. Make sure you to be very specific with the DAPs permit and your client are in line with what you get closer you can otherwise have unauthorized clients that connect or users who cannot connect. the end points that do not meet the criteria will get the default and terminate the connection.

    DAP and HostScan being so versatile, that it is difficult to find documentation on it or examples of specific configuration. I think that the requirement must run 8.4 or higher if. We can help you here at TAC with the configuration if you need assistance.

    I hope this helps.

Maybe you are looking for

  • People are Chinese characters in iMessage when I their message

    Be Chinese in iMessage characters when I message them, what is happening here?

  • Problem w. Q

    I have a problem w. something is not included in my project. The errors are: «No resolved inclusion-> #include » '--> Q_OBJECT syntax error. "Error of syntax-> private slots: I looked almost everywhere without any positive result.  Any help would be

  • Core service of Tandberg

    Hi all My client has an Edge95 with service contractend date 20/03/2012. Now, they want to renew a service contract from 10/01/2012 to 1 year. If I order this form of basic service Cisco rescued with 1 year now, what contact will be the start date? 2

  • Automate the deployment of iso on the virtual machine and configuration following the

    I need to:1. create a virtual machine with a certain configuration2 specify an iso file to be connected to the power on.3. the need to have access to the console after plugging on.I know that #1 and #2 are possible using the CLI. I need to know if #3

  • Unable to manage one of the plugin

    HelloUnable to manage one of the plugin in my vcenter. I uninstalled the plugin, but it is not removed from Vcenter. can someone help me here