How to change network name for all virtual machines within the same cluster

Similar Questions

• network stream between 2 virtual machines in the same vlan and host using DVS

  Hi experts, so 2 virtual machines on the same vlan / subnet and on the same esxi host using VDS need to talk to each other, that they get switched by the VDS internally or they headed north for network switches and come back?

  Welcome to the community - it will stay internal to the ESXi host.

• Practically in segregation a virtual machine within the same network

  We have a VMware ESXi 5.0.0 (504890) host that has physically 4 network cards. We run 3 VMs on that host and turning a new config. However, this new virtual machine will replace our old Windows DC, DNS, server DHCP etc., and we'd like to config it before going live - will not perform us a migration of swing. We are a little worried that it can interfere with our direct network and that's why I would like to somehow almost segegrate it.

  For the moment, we have a single vSwitch0 linked to all our VMs and management card:

  

  What is the best way to do this so that our new DC (with the same domain name and within the same network) can be configured without it interfering with the current network.

  Thanks for your comments.

  Oliver

  Hello

  You can create a second vSwitch without physical network interface cards. Create a VM Portgroup on this vSwitch.

  You can configure your new virtual machine to use the Portgroup. So, he won't have any connection to your network.

  The good thing is, when you want to test things with a customer, you can create a second VM and configure it to the same VM portgroup on the second vSwitch.

  Two virtual machines on this Portgroup can communicate with them because the traffic is handled internally by the host.

  Tim

• RDM for several virtual machines on the same LUN

  Hi, I have a requirement for multiple virtual machines to have access to the same LUN filestore. I think create ROW for each virtual computer to the LUN. I wanted to ask if this is possible and if someone put in place before?

  Are there issues making this record to file/san locks?

  Thank you

  Once you add the raw device map to a virtual computer, you can not add it to each other as well.

  It would satisfy your requirement to add to a virtual computer, assign it a drive name or folder, then that spread out and have another card SMV a drive to it?  Depending on what you're trying to do, which can satisfy because it will work.

  Rich

• Replying to a virtual machine within the same site

  I try to install vSphere replication v5.1.  I do this without SRM, but just the OVF appliance (s).  We currently have 8 guests distributed between two groups.  We have a vCenter control all this, and all is listed in a Data Center.  The second group is in our DR site and has different storage mapped to it.  I try to use vSphere replication as a means to keep our important VM replicated to our centre of DR disaster.  Is it possible to do so in the only current configuration?

  I'm having a hard time comes to work.  I have deployed two replication OVF devices and I'm stuck trying to replicate a virtual machine actually.  It gives me an error that the data object is not found.  I thought that I needed to 'Connect' from the local site to the remote site, but since this is all a time installing vCenter, I get an error indicating it cannot connect to itself.

  Is what I'm trying to do possible?  If not, could you let me know what I need to change to make it work properly.  Thank you.

  Hello

  The scenario you describe is supported - you can replicate virtual machines from one host to another within the same VC.

  To do this:

  -you will need to deploy vSphere 5.1 replication for a VC and no specific host

  -VR requires VC 5.1. If you liked VC - standalone VR will not work. If you have more recent VC, for example 5.5, you need RV 5.5

  -For replication within the VC even you don't need to link to the target site.

  -Simply select the computer virtual you want to replicate, when you opened a session in vSphere Web Client connected to the VC, point to the same location - must be available in the list, and select the appropriate data store and move through the wizard.

  Kind regards

  -Martin

• How to copy an instance for all other sites at the same time?

  Hi guys,.

  Just a question regarding the copy. When I for example change a line of code in my site index.html I want it to be implemented in all other sites. So I open each one and do a copy / paste. Is there a method of automatic implementation without manually copy and paste to various sites one by one ' cuz it is entirely of your time? See you soon.

  For NEW material in your pages within this site, you must use FIND of DW and feature REPLACE - to the favicon, you can FIND a code in the header of the document that is common to all pages, such as "" and REPLACE by "" followed by your code for links.  For any other code, you will find a few common starting point and replace it with a server-side include that contains the new code or with the new code directly, according to what might happen with this new code will in the future.

• PowerCLI to deploy virtual machines at the same time

  Can I deploy multiple VMs usng PowerCLI, but they spread out in the order and with an error.  It seems almost easier to deploy them manually so that they are created at the same time and not one after the other.  I also want the static IP but don't know how.

  For now, I use a card file customization that indicates static IP and guest for this.  But he never does, he deploys the vms system then throws an error stating VC ' a specified parameter was not correct.  nicsettings: adatpter:ip. "I want to increment IP addresses on virtual computers deploy.

  This is my Basic .ps1 file content

  New-vm - vmhost vm04a.domain.com - name w2k8sp2s64qa14-vm-model Template_w2k8sp2s64qa - Datastore vm04a_storage OSCustomizationspec - w2k8sp2s64

  Can someone help me?

  1 assign static IP addresses

  2 deploy all virtual machines at the same time

  ...

  The parameter - RunAsync right on the New - VM cmdlet.

  She will continue with the line after the New - VM without delay that the cmdlet New - VM to finish.

• change default location for new virtual machines programmatically

  I know that you can change the default location for new virtual machines through the preferences GUI, but I want to be able to change it for all those who use VMWare Workstation in my company, so that it is more advanced to the personal folder of the user.

  Where exactly is stored?  I don't see in the registry.

  Thank you!

  WS does not use the registry to store settings.

  Set the path in UNK for each user:
  prefvmx.defaultVMPath = "F:\. »

• Setting Options such as Hotplug for all virtual machines

  Hello!

  I have about 5 esxi hosts 5 and about 50 virtual machines

  Unfortunately I forgot to select some options like activate the plug-in memory and cpu hot

  I have 2 questions

  1 can I do this without turning off the machine

  2. How do I make a few options like this (or for example another option as vmtools update during the feeding cycle) for all virtual machines in my environment

  It's too much time to go to all virtual machines and turn them off and turn on these options

  Thank you very much

  These features must be enabled before the virtual machine is running.  So, you will need to turn them off and then use something like powercli to enable the features and turn them back on.

  Here is an example on how to do it with powercli: http://ict-freak.nl/2009/10/05/powercli-enabledisable-the-vm-hot-add-features/

  -KjB

• I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

  As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

  I have solved my problem by trying everything that moves. Here are my steps:
  -Open Virtual PC and minimize it
  -In the Windows 7 machine, click Start click all programs
  -Select Windows Virtual PC
  -Select Windows Virtual PC (in the drop-down list)
  -When the window opens, right-click on Windows XP Mode
  -Select share >
  -Select the homegroup (read/write)

  -Minimized open Virtual PC
  -Select my computer
  Windows 7 disks will be under other

  I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

  Even a blind squirrel finds an Acorn once in a while!

• A virtual machine at the same time...? Which means that for Vmware replication

  Hi guys

  I read the Vmware 5.5 replication, and it says what I do not understand.

  I was reading the recovery process and he said:

  You can recover a virtual machine at the same time on the site replicated on the incoming replication tab

  what it means?

  I restore a VM and I have to wait until he said recovered to start the recovery process or simply means that a single virtual computer at a time and no group of the virtual machine can be recovered I can begin the process of recovery in 3 VMs at the same time, but I have to go one

  Thanks a lot guys

  Hello

  The second. You can begin the process of recovery for each virtual computer and they can go in parallel. However, there is no option to select more than one replication and begin the process of recovery in a single step.

  Kind regards

  Martin

• Tagged management VLAN and the virtual machines on the same VLAN

  I'm faced with a problem related to our Brocade switches newly acquired and get the private VLAN to work on trunk connections to our ESX servers.  Every time I try something different, he creates a new problem.

  In our configuration, our management of VLAN is not tag and we have a VLAN for this management network that is placed on our switches VLAN no marked native.  We also have virtual machines hosted on those same ESX servers that are on the same VLAN and everything works fine.  However, when I change the ESX management to carry a label on this VLAN and change the switchports accordingly (IE no untagged VLAN native), management work, but hosted on the ESX Server machines that are on the same VLAN can get no network connectivity.

  Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?  I'm not very familiar with networking behind ESX, so I apologize if this is a dumb question with an obvious answer.

  Thank you

  Mark J.

  Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?

  Yes, it is possible... why it doesn't work for you I don't know, but try the following:

  1. set up the Group of ports of VMS to use VLAN;

  2 configure the interface of management VMkernel port group use VLAN;

  3 configure the physical switch port to allow to this VLAN and put the default VLAN natively for these interfaces.

• Oracle XE on multiple virtual machines on the same physical machine?

  Hi people,
  
  Can I install Oracle XE on several virtual machines that are on the same physical machine?
  
  Thank you
  
  G. grangier

  I find that this interpretation is questionable.
  Instance, what do mean?
  What they mean by server?
  Unless Oracle explicitly forbids the execution of several databases of XE on different virtual machines at the same time, I don't see violations.

  For example, imagine that the user has runs that XE on AWS and user B running an another XE on AWS.
  They are not running on the same "Server"?

  Flavio
  ----

  http://oraclequirks.blogspot.com

• Let me know scenarios when different virtual machines with the same UUID are created in VMware Hypervisors?

  Let me know scenarios when different virtual machines with the same UUID created in VMware Hypervisors, aside from editing the .vmx file?

  The only other way I've seen is when you manually copy the virtual machine to another location on the data store (or another data store) and then when turn on/off the virtual machine, select I moved, rather that I copied it (the default option).  This will keep the same UUID.

• How to map network drives for all Windows 7 users

  I'm trying to map network drives in Windows 7.  I did it by the usual method, but readers of network appear only for a single user (Administrator) and they do not appear for other users.  Is it possible to map these drives as an administrator so that all users can see them (instead of each user maps itself)?

  Thanks for your help!

  Hi may 1

  There is no possibility to map the network drive for all users at once.

  However, you can access the mapped network drive other user accounts by using the credentials.

  To access the mapped network drive.

  1. click Start , then computer.

  2. click on map network drive.

  3. now, make a check mark in connect using different credentials.

  4. click on Finish.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.