How to change the ascii mode in dreamweaver?
How to change the ascii mode in dreamweaver?
Dreamweaver should automatically switch to ASCII as you can see from the following FTPExtensionMap.txt content
In case you want to check your FTPExtensionMap.txt file, it can be found in the Configuration file according to the Dreamweaver crashes at startup
Tags: Dreamweaver
Similar Questions
-
Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?
Thank you very much
Buskroth
the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...
-
I have a table which I use to save 3 Boolean values. I used a probe to check and just before I get into the structure of the case, I have 3 values (FTT). I also have 3 values after I get the large case (FTT). However, once I enter the loop for, I only get the last value. I want to change the mode of tunnel for indexing, but when I right click on the box that I outlined in red, there is no other choice. How can I change in order for the three values to enter in the loop for?
Thank you.
-
How to change the SATA mode to AHCI, no setting on the BIOS (Aspire E5 - 471P)
How to change SATA to AHCI mode. Any setting in the BIOS (Aspire E5-471P-35Y2)
Are you sure that your system is not already on AHCI?
-
How to change the Merge mode key? (mac)
I used win7 in past and when I want to change the mode in layers of simple fusion I choose this layer, click on for the blending mode and roll down with the "ARROW DOWN" key but in MAC OS X that will to some don't work not. So my question is, how I roll through this palette? Is there a shortcut?
Thank you very much
Instead of using the arrow keys, there is a better key for the mixture of fashion, which releases the mouse.
MAJ- Goes up in the blending mode
Shift + Goes down in blending modes
Make sure you are on the move tool first (you can hit v to switcch tools), as the blend mode shortcut also works on the blending mode for a tool if the tool has a (for example: brush).
-
How to change the power mode in Windows 7
Hello
I'm not very good in English (I'm Dutch) only when I talk about games or something not to technical stuff, but I'll try to explain
In recent weeks, I have windows 7 running on this laptop.
First I had vista, but who was bad. Windows 7 works much better.In any case, I don't have day my laptop with drivers from this site.
When I was running I was missing something.On the right side where you can chance your schedule 'energy', you can choose between low and balanced performance.
On vista, I had as good, but not now.Y at - it an update where I can lucky who?
If Yes please can someone tell me where to find this update.Greetings,
me
took me 10 minutes to post this because of your message contains profanity or inappropriate language.
In the interest of your fellow forum users, we ask you to change your message.Hello
Windows 7 is a bit different as the Vista operating system.
But you can change the settings in the Power Options located in the control panel.Go to the Control Panel-> Power Options
There you can find both of these options; Low performance and balanced performance.
The high performance is hidden you will need to click the arrow to open the option where the mode performance.But you can also create a mode of clean energy;
On the left you will find the option: create the mode of power (or something like that... Sorry it s just translated)
That could be an option that lets you choose the high performance. -
Hi guys,.
is it possible to control the display mode of the interactive reports, i.e. display icon, list, view detail, group by, chart, pivot?
As I understand the current setting is stored as a preference of the user for each user... and again when his connection. A settings of the rules them all (all the stored report parameters).
The display mode switchable using a javascript, the api package apex_ir or via a link?
Thank you
~ Dietmar.Hi Dietmar,
It is not a supported way to change the display interactive report mode. With the device connected by Anthony internally, we will consider adding this because part of apex_ir or a link to the future.
Kind regards
Christina
-
How to change the font size in dreamweaver
Hello? It is really a bit overkill for a simple question. could someone please help with this?
and while we're at it there ' was a fly, I want to kill with a hammer
If by changing the font size you want to say in your web pages, the answer is use CSS with values in px, em or %.
Body {size are: 100 %}}
p {make-size: 1em}
H1 {make-size: 3em}
H2 {size are: 2.5em}
H3 {make-size: 2em}
H4 {size are: 1.5em}
and so on...
-
How to change the display mode screen landscape
original title: screen display
my 1 year old has done something to my computer and now when I start it up to the top of the screen is in landscape mode.
All versions: hold down Ctrl & Alt keys and use the arrows to rotate backwards.Vista: right-click on the desktop | Graphics options | Rotation.Windows 7: right click on the desktop | Screen resolution | Orientation. -
How to change the duration in slideshow Dreamweaver?
http://designerandpublisher.com/_forum-images/slider/no-jquery2.html
I looked everywhere in the DW source files and I can't find the time or duration of each slide before it turns into another. The blade seems to stay on for about 5 seconds before proceeding to the next. I want to change to about 8-9 seconds.
Does anyone know what piece of code allows me to do this?
Thanks in advance.
I found it. This should go into the code of command like this:
$AutoPlay: true,
$AutoPlayInterval: 8000,
I just wanted to put it there for others who have the same problem.
-
How to change the RAID mode on this camera?
I looked everywhere but there is no option to do this on my NAS?
The setting of the RAID THAT SHOULD be on this page, but it is not?
I didn't know that I had the CLOUD EDITION.
I've updated the NAS with NON-CLOUD EDITION.
That's why it wasn't working properly.
There is no indication on the product which edition it is.
-
I used my iMac as a hard drive backup to my macbook once. Now when I update to El Capitan he says that it cannot be updated due to being of a backup. How do I change the drive mode so I can update?
If you use your iMac as a backup to disk using Time Machine look for a folder called Backups.backupdb.
It's what keeps you upgraded your operating system, you must remove it.
Copy everything first if you are on a different drive. It would be wise to create a backup of the iMac on another drive also.
Check system preferences > Time Machine and make sure that the iMac is not selected as the Time Machine drive.
-
How do I change the log mode archive in 12 c
Hello
[oracle@localhost Desktop] $ rman
Recovery Manager: release 12.1.0.2.0 - Production on Mon May 4 00:38:33 2015
Copyright (c) 1982, 2014, Oracle and/or its affiliates. All rights reserved.
RMAN > Connect target sys/oracle@cdb1
connected to target database: CDB1 (DBID = 828012650)
RMAN > backup database;
From backup may 4, 15
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 284 type device = DISK
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command at 04/05/2015 00:38:51
RMAN-06149: cannot BACKUP of DATABASE in NOARCHIVELOG mode
RMAN > exit
Complete recovery manager.
[oracle@localhost Desktop] $ sqlplus
SQL * more: Production release 12.1.0.2.0 on Mon May 4 00:38:57 2015
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
With the options of partitioning, OLAP, advanced analytics and Real Application Testing
SQL > shutdown immediate;
Connectable to closed database.
SQL > startup nomount;
SQL > startup;
Connectable to open database.
SQL >
Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0
Please tell me how to change the mode of journal archive in db oracle 12.1.0.2.0
Please mark the thread ANSWERED and repost it in the forum shared.
Before you repost again the "Archiving for control" secion of the Oracle documentation
http://docs.Oracle.com/database/121/Admin/archredo.htm#i1006208
Archiving control
This section describes how to set the mode of the database archiving and control the archiving process. The authors discuss the following topics:
This article shows you step by step how to change the mode of journal archive.
-
Dreamweaver CC: How to change the color of the selected text
Maybe a stupid question, but I can't seem to figure it out, even with searches on the web. I want to change the color of a single word in my HTML document. Can anyone offer advice?
I can change some styles of the selected text (bold, italic, etc.), but do not understand the color.
Also, I know how to change the color of the different elements using CSS. But for the selected text in an element, CSS here the simplest solution?
Thanks in advance.
carlg79335635 wrote:
Thank you for that. But I don't have a color option in my menu format. It ends at some CSS Styles. I have to allow him anywhere? I use Dreamweaver CC.
Yes. I checked it and in CC DW, there is not a way to do as I suggested previously. I was watching DW CS6 and he got it.
Looks like you'll need to teach how them to manually code. This will make them think about what they are doing and so concentrate better.
-
How to change the areas of region of report in read-only mode?
How to change the areas of region of report in read-only mode?
SKUD.Add fuction javascript after the page header (or section of function and Javascript variables)
function disableItems(pRegionStaticId,pDisableFlag) { $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */ if( $(this).attr('name').match(/f[0-9][0-9]/) ){ return $(this); } }).attr('disabled',pDisableFlag); }
pRegionStaticId is static Id + the region
Note that this code specifically disables only the berries of request. Disabled items are not available after the submission (and are therefore different from readonly). But any javascript page can change disabled or readonly points (client side), so you need to check on the side server to validate the data.
You can disable items to help
disableItems ("MY_REGION_ID", true);
and allow them, by passing false
disableItems ("MY_REGION_ID", false);
Maybe you are looking for
-
If I want Outlook Express for my e-mail how do downloaded?
On my other computer that I want to get Outlook Express for my e-mail, how it downloaded?
-
Outlook express 6 switched to the annoyance of the window. Using broadband now
I recently changed my high speed line and just got my outlook express set up with new high speed address. (I still have service with dial-up company for now also) Crosses all OE6 implemented with service technology high speed. for OE6 configured to
-
614332 001, pavilion DV6T-3000: front drive 614332-001
The CD/DVD-writer / optical drive Blu - Ray Player in my laptop Pavilion DV6T-3000 died. The reader sends is more a signal to the computer when a disc is inserted. So if I try to access the drive, I get the prompt telling me to insert a disc and inse
-
I want to install an ftp site on a server inside my 501 Pix (not on the demilitarized zone). What lines I need to add to the Pix to allow incoming FTP requests?
-
Installed a new wireless router for my XP laptop and connected the router on my Windows 7 desktop. The Office has never gave me the chance to enter a network name or the password and came as 'unidentified network '. I can now access the internet do