How to change the BIOS settings to read the Norton CD?

In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

1. the computer starts from the CD and you can follow all instructions you have Symantec.

2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

Tags: Windows

Similar Questions

  • ProBook 4440 s: how to change the settings of the bios on my hp ProBook 4440 s to increase dedicated video ram

    How to change the settings of the bios on my hp ProBook 4440 dedicated to increase video ram?
    I want to increase to play better games.
    How to change through the bios I don't know.
    Help me pls.

    Thank you

    The days of being able to change RAM in BIOS went Bye Bye a few years ago. It was back in the day.

    You can't make changes to the video RAM settings in BIOS.

    You can reduce the resolution if you want to increase performance in a menu of own game options, but at a cost of resolution.

  • Portege S100: How to change the RAID in the BIOS

    Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
    Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

    I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

    This is the same as that recorded in this link: -.
    [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

    I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

    Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
    The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

    If the second HDD was inserted and then change the RAID in the Windows operating system.
    There should be a Toshiba RAID Console.
    You can use this console to create or manage a RAID array.

    To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
    It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

    But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

  • How to change the security settings on a wireless network

    I would change the existing network security settings to WPA2, AES, or at least from TKIP AES.

    I am familiar with access via browser to the router and how to change the settings of the router.

    My question is how to make this as painless as possible for the network.  Step by step would be great

    First of all, I guess I have to change the settings of the router using the computer running Easy Link Advisor?

    Do I then have to disconnect/reconnect this computer?

    Do I have to unplug all the other computers and then sign in again with the update settings?

    The change of security settings affect my print server?  If so, I put up from scratch in ELA?

    For the record, I have a WRT 300N and the print server is a 54g.

    Anyone who reads this can also focus on recent news.  Maybe not a big deal, but a WPA/TKIP vulnerabilities has been identified.

    Thanks in advance to anyone who responds.

    If you change the router's wireless security settings, it will affect all devices that connect wireless to the router. To change the settings, simply set until you want on the web interface of the router. Save the settings. You need not link to that Advisor. Direct access to the web interface of the router is sufficient and preferable.

    All devices configured to connect to this network should ask if they connect more. It depends on type of what you had before. If you have not used WPA2 or WPA before having to ask for the password. If you used the WPA or WPA2 with the same password that they cannot even ask the password. How it works in detail with a specific wireless device depends on the device and the software you use. Some devices may require you to first remove the network wireless in the list of "preferred networks" and then reconnect.

    Check the manual of the print server how to configure for the new security settings. You should be able to reconfigure the print server through a web interface. First, it is probably best to change the settings on the print server and then make the change on the router. Otherwise, you may have a hard time, connection to the print server to make the change. In addition, depending on how old the print server is that it cannot even support WPA2 and AES.

  • Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Greetings jenniferfrom46,

    From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

    If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

    Have a good!

  • Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

    Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

    Why do you think that this can be changed?
    Maybe you can disable the RAID and be happy without him.

    Have you checked s manuals? It is described how RAID works on Qosmio F30.

  • How to change the language settings in firefox using JavaScript

    My question is: how to change the language settings in the use of JavaScript in firefox:

    I want to set the value of intl.accept_languages en using JavaScript.

    How can I do?

    EDIT: The reason mail, I want to do is to be able to run selenium for different languages test scenarios with manually change them rather progrmmetically

    You will need to close and open the pref via user.js or prefs.js before restarting Firefox to perform the next test.

    See:

  • How to change the color of Satellite Pro P300 settings

    I just received my new laptop computer and cannot for the life of me find how to change the color settings in the monitor.
    My old desk there was a button on the monitor.

    In a first time laptop user im nuts will try to find how to change my monitor settings...

    If anyone can help id be so grateful

    Please don t mix the portable computers internal monitor with external PC monitor.
    You won't find any control unit and on the external monitor that would help you to change the color.

    I put t know what your laptop smart chart uses but my laptop supports Intel graphics card and pre-installed (in Control Panel) Intel Graphics Media Accelerator provides a few color correction settings.
    The parameters are; color, gamma, brightness and contrast

    Here, you can set values between 0 and 100

    Maybe it's what you're looking for

  • How to change the settings on the Equium A100 color & contrast

    Does anyone know how you change the settings on the Equium A100 color & contrast? Thank you.

    Hello

    Change the contrast and color?
    Well buddy, you can change the screen brightness level using the FN + F6 and F7 key combination of.
    The other settings are only editable in the properties of the graphics card.
    I put t know what graphics card you are using but usually you must search advanced options.
    Check if there is no gamma, brightness or contrast settings.

    I found these settings on my laptop. I have a graphics card intel and the option was called the color correction

  • How to change the read-only, write protect status of files?

    Original title: change the State of the files.

    I have problems deleting files.  I need to know how to change the status of the files: e.g. "read-only, write protect, etc."

    Hi fbanks4,

    1. were you able to remove the files before?

    You can read the following article and try the steps to change the status of the read-only files:

    You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

    http://support.Microsoft.com/kb/326549

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to change the default path for documents and settings

    How to change the default path for documents and settings

    I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

    Hello

    I suggest you to download TweakUI, this could help you or get you headed in the right direction
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

    Also this KB could help as well:
    http://support.Microsoft.com/kb/236621

    It will be useful.

  • How I change the settings to do myself the administrator?

    Hello

    I just bought a Lenovo with Windows 8 desktop computer on it. I find it extremely slow despite my fast Internet connection. He keeps asking me to constantly update of software and there are ads and other pop up all the time. I wanted to download a pop-up blocker, but it says I can't because I'm not a qualification. I tried to change the settings of the control panel account but could not yet because he says that this administrator does not allow this. How I change the settings to do myself the administrator? Thank you.

    Original title: administrator account

    Hello

    I suggest you to start the online virus scan. Follow the steps in the link below.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Let us know the status of the issue. We would be happy to help you.

  • How to change the settings of Windows 8 trackpad

    I have an Asus S400C with Windows 8 is installed and pain with my trackpad.

    I'm used to be able to scroll with two fingers on the trackpad, but this function seems to have completely abandoned.

    When I got my phone a few months ago, that this would work sporadically, but now nothing. I tried to hunt around in settings, etc. to see if it needs to be enabled/disabled, however I can not even find the trackpad settings! I searched touchpad/trackpad etc. and looked through the settings of the mouse, but none seem to control the current laptop keyboard. Instead, it maintains direct me to the tactile features on the current screen.

    I'm so use to scroll with one finger on my screen while using the mouse trackpad for other features...

    I tried to have some Google around for this online but everyone seems to have slightly different questions and no not to Asus - some answers have to give on the brand of computer - but wouldn't it be bound to the windows software and where touchpad info are stored?

    If anyone knows how to change the functions of the trackpad, or at least where to find who would be most appreciated!

    Thank you

    Hello

    There are several different manufacturers of the Trackpads. The computer manufacturer decides what trackpad to install based on compatibility with other hardware and software on the system.

    The computer manufacturer will include a utility for the trackpad, which is designed for this particular model options. It is usually a utility that adds a Trackpad tab in the Control Panel/mouse component, or it may be a separate control panel item.

    You must contact the Asus support for a solution.

    ASUSTeK Computer Inc. - Support - Knowledge S400CA:
    http://support.ASUS.com/knowledge.aspx?SLanguage=en&m=S400CA&p=3&s=481#troubleshooting

    ASUSTeK Computer Inc. - Support - Troubleshooting:

    http://support.ASUS.com/download/options.aspx?SLanguage=en&type=9

    This will have information on the hardware devices installed on this specific model and download the latest drivers.

    You can also discuss this issue with others who have this model.

    ASUSTeK Computer Inc. - Support Forums:

    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    Concerning

  • How to change the settings of the edge GW firewall created by vRA

    Hi, NSX and expert vRA

    What I want to know is how to change the settings of the edge GW firewall created by vRA.

    I've created a plan including the network of transit as follows:

    According to this plan, edge gateway is put into service, but the firewall is also created as below:

    Because of this firewall configuration, the VM 'User' cannot access the VM 'WebSV '. How can I use vRA to make the link between 'User' and 'WebSV '?

    Yes, you need a 1:1 profile, otherwise what you try does not work.

    Grant

  • version of Acrobat reader dc 2015: how to change the highlight color?

    How to change the color of highlight (in dc 2015 of adobe acrobat reader version)?

    Hi Herwig,

    Highlight Select tool, press CTRL + E, Properties window will open, you can change the highlight color for here.

    Kind regards
    Rahul

  • How to change the tooltip background color in Adobe Acrobat Reader? - ...

    How to change the tooltip background color in Adobe Acrobat Reader? - ...

    Hi xiaolaq75134938,

    I'm sorry, it is not possible to change the background color of the ToolTip, it is a design behavior.

    Kind regards
    Nicos

Maybe you are looking for

  • Cannot copy and paste links in Facebook comments

    For some reason, from ten days previously, I can't no longer paste links in the fields of Facebook comments. I can paste text; but when I copy a link and try and paste it, nothing happens. It's like I never copied the link. I followed the suggestions

  • How to activate my ipad ios 90.3 pre-installation please help me

    I need help to activate my ipad before you install ios 9.3 I have try all the way, but it didn t work

  • Temporary folder

    I have a Pavilion a324x - 2004 - bought OS is XP home, ISP-VersionDSL - 768kb.  I'm an amateur on computers.   When I download a game and he asks me I want to 'run' or 'save', I click on save.  OK, it is said that it is saved in a temporary folder. 

  • Freeze the images and the game closes when you play call of Duty Modern Warefare 2

    Could someone please help me to get into the thick of this please! AM running windows 7 pro 32 BIT my system is a Core of duel AMD 4600 +.AM2 MB m2npv-vm chipset geforce 6150DDR2 2 gig ram xtreem dark 800GE-force 9800GTX + 1024 megIf there is any oth

  • Impossible to uninstall hp photosmart essential 3.5

    Original title: hp photosmart essential 3.5 HP dumped all my photos and now I'm trying to remove my computer from HP photosmart essential 3.5 because it is causing me problems.  I can't get rid of it. I ran malwarebytes and virus scan, OK