How to change the configuration of keyboard U.S. / UK?

Similar Questions

• New router - how to change the configuration?

  I installed a new router but don't have my installation CD for my printer Photosmart 4385.  How can I change the configuration of my network without the CD?   I downloaded the drivers and software site HPO installation, but when I ran the installer, it never asked anything on the network.

  When you start the software, make sure that the printer is not connected to your computer via USB.  Then it should ask if you want to create a USB installation or network.

  If this isn't the case, you downloaded the software "full"?  Do this.

• Qosmio PX30T-A-14r: how to change the type of keyboard language

  You just bought an AIO Qosmio px30t-a-14r / windows 8.1

  At the start, during the first installation, I had to choose the language and keyboard settings.

  I chose the language: English-uk.
  For the keyboard, I had the choice of 3 types:
  -Belgian comma
  -dot Belgian (or point?)
  -Belgian french
  I chose Belgian by commas.

  However, later in the installation process I was able to test response of the keys on the keyboard with this configuration.
  It was the wrong setting.

  How can I change to "Belgian point" or "Belgian french.
  Should be one of these 2 but I don't know how to change it.

  Has anybode a suggestion?

  Thank you
  RC

  It is not very complicated:
  Press the Windows key + C to open your charms... Then select the charm of settings and then click Change PC settings. Click the time and language, and then select the language and region. On the right, select your language, and then click Options. Click Add a keyboard, and then select the keyboard you want in the list.
  This will add your selection to the list of keyboards.
  You can remove a keyboard by clicking on it and click on delete.
  In addition, you can also add several keyboard layouts and switch between them when necessary.

  You can switch between your keyboard layouts by clicking on the language and the keyboard at the bottom right and then select a keyboard layout. Or you can use the 2nd method: on your desktop, you will see your current language in the lower right corner next to the clock. Click on your current language and choose a keyboard layout.

• How to change the configuration of workflow mailer in the template file

  Hello
  
  I have the setting OutboundUser = changeOnJavaMailerInstall in the mailer WF configuration. I have this empty parameter. That is to say that I want to delete changeOnJavaMailerInstall. I did this front end. But when I run the autoconfig he recovering setting. Please let me know how to make this change permanent. what template file, I need to change?
  
  Thank you
  MSR

  PL file context of search requests (/appl/admin/.xml) to see if you can find the value "changeOnJavaMailerInstall". If so, edit the file and change the value to everything you need, and then run autoconfig and bounce application services.

  HTH
  Srini

• How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

  Compaq Presario SR2030NX

  Product #RJ036AA

  S/N {removed privacy}

  MB: ASUS A8M2N - LA

  Bought: October 2006

  OS: Windows XP Media Center 05

  New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

  New: 480w PSU

  ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

  PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

  Troubleshooting has included:

  Fixing monitor with its cable to another PC - monitor work

  Fixing working monitor and cable to the PC - No Signal

  There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

  Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

  How to reset the BIOS when you do not see what you are doing?

  I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

  If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

  QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

  

  Thanks for any help

  GJB

  Thank you Paul,.

  I didn't know that it was just a function of Regedit - piece of cake.

• Satellite Pro C660-167: someone knows how to change the sensitivity of the keyboard?

  Anyone know how to change the sensitivity of the keyboard? Having real problems when entering laptop missing letters. !
  Very annoying!

  Hello

  I think that this problem could be solved by the BIOS updated.
  Please take a look on Toshiba European driver page and download the latest version of the BIOS.

  I read here in the forum to the similar topic with another series of notebook and the BIOS update does work.

  Good luck

• How to change the keyboard on Portege M300-101?

  Hello

  I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

  Best,
  Dainis W. Michel

  Hello Danis

  Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

  In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

  If you still think that you do not write anything again.

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).

  

• My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I do my wo

  My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?

  I use Lightroom 6.4 on a Pc with Windows 10.

  Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.

  If this does not work, please post a screenshot of the problem.

• How to change the default "/" shortcut (select none in the shade of color) to something different? Where can I find this in keyboard shortcuts?

  How to change the default "/" shortcut (select 'none' in the shade of color) to something different? Where can I find this in keyboard shortcuts?

  Any ideas?

  In the Tools menu:

  "Apply no color."

• How to change the default value of MS Paint record - an output to jpg for shortcuts KEYBOARD: Alt-F-A (or S)?

  I've seen a lot of posts on this subject here, but they are all on the use of the mouse and I did not yet find one with an answer to MY specific dilemma.

  I take screenshots and edit photos (Nothing fancy) almost every day. Given that my physical disability in my arms causing me pain and discomfort when I use the mouse, I need to use several shortcuts as humanly possible help reduce the constant pain, I'm still in my right arm using the mouse.

  I *need* to know how to change the default hotkey Alt-F-A (or S) to save it as a JPG file relative to the current default value PNG which I use never, never. If it requires editing the registry, no problem, just point me in the right direction and guide me on how to do it.

  Thank you

  Lee

  LAST UPDATE 09/30/15 @ 16:54:

  The solution to my dilemma can be seen in my other thread (analogue/reprise). It is in case anyone in the future stumbles across this thread with the same problem and needs the answer.

  Since this thread will not be deleted, I would would add the link to the solution in case anyone stumbles across this in the future.

  See my other thread at: [Solution here]

• How to change the image field captures screenshots automatically from BMP to JPEG

  How to change the image field captures screenshots automatically from BMP to JPEG

  I want to say, when I tap on the screenshot on my keyboard and paste this image in microsoft photo editor or picasa 3.0 areas of the bitmap .bmp. instead of asking the witch I´d field prefer.
  So, I open that image on the brush to convert it to. JPEG.
  It's hick very!
  is it possible to easily me this step and save or paste pictures in JPEG on my files automatically?

  Hello

  I saw that article when I was looking for one that I posted...

  I understand your problem, and the answer is that, to the best of my knowledge... NO..

  Windows records the capture in memory as bitmap, along with, even if you can paste it directly into a folder, it would be in the form of bitmap...

  The best I could find is to use the suggestion in the link I've included which refers to the

  Windows Key + PrintScreen to automatically record is in PNG format in your pictures folder...

  The only way to do what you want is with a 3rd party capture program that can be configured to save in a directory as a specific file type...

  Personally, I use a program called print screen Deluxe for this... it is a purchased program...

  I'm sure you could find something free to do what you need...

  You may need to use a different key for print screen, but the software can allow you to reprogram the PrntScrn key...

• Portege S100: How to change the RAID in the BIOS

  Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
  Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

  I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

  This is the same as that recorded in this link: -.
  [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

  I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

  Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
  The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

  If the second HDD was inserted and then change the RAID in the Windows operating system.
  There should be a Toshiba RAID Console.
  You can use this console to create or manage a RAID array.

  To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
  It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

  But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

• How to change the channel of my SONY HDR-CX440 wireless?

  I'm live streaming video from my sony HDR-Cx440 to an iPAD using app "playmemories Mobile". Communication between these two seems to be on Channel 6 and which interferes with my other wireless devices. I want to change the channel from 6 to any other channel wireless. How can I do?

  Salvation TV,.

  Welcome to the community of Sony!

  We're sorry, but there is no way to change the configuration wireless from the camera to a different channel.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch