How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex
Compaq Presario SR2030NX
Product #RJ036AA
S/N {removed privacy}
MB: ASUS A8M2N - LA
Bought: October 2006
OS: Windows XP Media Center 05
New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement
New: 480w PSU
ERROR: NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot
PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased. On start-up, the screen shows "No Signal" then turns off.
Troubleshooting has included:
Fixing monitor with its cable to another PC - monitor work
Fixing working monitor and cable to the PC - No Signal
There is no boot beeps, fans, lamps, not work cable defeated, no video. I concluded the embedded video component failed.
Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL. New video card specifications called for a minimum 350w power supply. The fan on the new video card PCI - ex works. Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video. Makes perfect sense to me, sounds like it might work.
How to reset the BIOS when you do not see what you are doing?
I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not. I tried a couple blind BIOS resets, but I could do this for months.
If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS. The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.
QUESTIONS: How to determine the version of the BIOS. Which key I hit to access the BIOS (F1, F10, esc, Del)? Which menu I followed to reset the type of video, so how can I save and exit?
Thanks for any help
Thank you Paul,.
I didn't know that it was just a function of Regedit - piece of cake.
Tags: HP Desktops
Similar Questions
-
How to change the graphics card on lenovo v560
Help, please. How to change the graphics card on laptop Lenovo v560?
Windows 7 Ultimate, the drivers are installed.
Sorry for my English. I'm from the Ukraine.
-
How to change the graphics card on the 15 new
Hello world
I just got my new alienware 15 and I can't seem to use the nvidia card instead of intel because "fn + f7" no longer exists in this system and some options are provided in the bios.
Does anyone know how to go the nvidia card in the new system of 15?
Make sure you have the latest nVidia and Intel drivers installed. I noticed the same problem on my 15 when I've seen, but resolved as soon as I updated. I suggest that you install Intel drivers first, and then the nVidia drivers. So if really don't know the issues, but that's what I did and it works like a charm.
-
How to operate the new card WLAN on my Satellite P105-S6024?
Welcome
My laptop is:
Toshiba Satellite (17 inches)
P105-S6024
I had a processorProcessor
Intel® Core Duo T2050 processor
(Cache 2 MB, 1.60 GHz, 533 MHz FSBThe bios following from another laptop that has intel T7400 CPU
Intel processor Core 2 Duo T7400 (Cache 4 MB, 2.16 GHz, 667 MHz FSB)
I use the following with another laptop biossupports Intel T7400
BIOS-20090304153829. ZIP
http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090304153829.zip
Currently I have a wifi card
real
Intel model: WM3945ABG MOW1
P / N PA3489U-1mpc
IC: 248 H-DPA3489W
FCC ID: CJ6UPA3489WL
Toshiba P / N: G86C0001U910
Toshiba S / N: WC362560621I bought a new wireless card
Cutting-edge Intel Centrino-N 6200
Half-size PCI Express Mini Card
Model: 622ANHMW
D P / N: 02GGYM REV. A00
CN-02GGYM-70223-03K-02SQ-A00I put on and turned on the laptop.
Unfortunately, only the fan and the screen became black
Nothing on the screen does not appear
Walk of the Windmill
and DVDRW drive
Turn off wifiThis card is less than half orginalna intel 3945 wifi
But he came, it includes two cables.
Someone here on the forum to advise me how to change the bios?
Go 6200 card WiFi intel?
Why not delete the whitelist?
Why insulate the card wifi of pine?
Maybe add a new card to the BIOS?
Help, please
and I thank you in advancePS.
My laptop is P105-S6024 has one different from another laptop bios model, because I changed the processor from Intel by 2050 for a such a T7400. BIOS + intel T7400 + intel 6200 Wireless will have to be modified for a new card intel 6200th
Post edited by: krzysiekrk
Hi krzysiekrk,
To be honest, your ad is a little hard to understand and I don t understand why you installed another wireless network card.
I think that the new WLAN draft N card is not compatible with your laptop so it boot doesn t. In addition, you can use project t N if you have only 2 antennas WLAN. N project requires 3 antennas.Then ask a service provider authorized in your country if guys can order a new WLAN card compatible.
A few weeks ago, I replaced the card of wireless network from a notebook of s from a friend and it was Intel 3945ABG card too. This wireless network card is still available and it will be produced so it s not one end of product life.
-
How to change the network card eth0 eth1 on host (Linux Debian 5 "lenny") til
Hello
I just installed the server VMWare 2.0.1 for Linux 64 - bit version on my Linux Debian 5 "Lenny".
The host is also my firewall and unfortunately I was a bit quick in accepting the default settings, and this is why I agreed for the network card eth0.
I just installed my first virtual Ubuntu 8.10, but I can't see LAN, the virtual server is hung on the WAN card op.
How can I change this?
Just re-run the script vmware - config.pl who will take you through the network configuration again. Note to all virtual machines powered off.
Guy Leech
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
How to change the new tab Page in the menu of tiles?
I want tiles on my new page tabs instead of page white or any other search engine. Help, please
"Out of the box", new Firefox tab page shows tiles, based on your history, and you can replace with other sites if you wish.
Here's how you can change your new tab page:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered
(3) double-click the preference browser.newtab.url and enter your favorite page:
- (Default) page thumbnails = > subject: newtab
- Blank tab = > subject: empty
- Built-in Firefox homepage = > topic: welcome
- Any other page = > full URL of the page
Press Ctrl + t to open a new tab and check that it worked. Fixed?
The new integrated tab page, the "gear" icon should provide both classic and enhanced, that show tiles.
If the problems persist, some potential diagnoses and remedies:
If Firefox will not let you change this setting: you can have what is called SearchProtect on your system. This must be removed the control panel.
Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click Extensions. Then, take a critical look on the list on the right and turn off (or remove) something unknown.
If the modification works during your session, but during the next startup is return to the unwanted page: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.
A little luck?
-
Satellite P20 S203: how to change the graphics card memory
My laptop has 32 MB graphics card I was wondering how I would improve my Vram to 64. What I do how would be, where would it be and what I have to install?
Thank you
To my knowledge, the Satellite P20 S203 was delivered with a nVIDIA GeForce FX Go5200 32 MB of video ram. But this isn't a shared memory graphics card!
In this case, you cannot change the settings of video ram.In addition he s is not possible to upgrade or replace the graphics card. Unfortunately, there is nothing to see ;(
-
Envy 17: How to change the new answers to installation of PC
I just got my new HP Envy 17 with 10 Pro 64 - bit Windows for the first time. He went through a series of first time, the Setup screens. Two screens will appear with the options of privacy settings with respect to sending any information to Microsoft. I wanted to turn off (disable) all options but accidentally went to the next with no option to go back screen. Setup continued on his own for several minutes and then finished.
How can I go back and change the settings first time options? I can re - run first installation? Or y at - it another way to change these options?
Thanks for your help!
Hello: Please see the following link for more information:
Just for the record, I had difficulties to define the privacy settings of Windows 10. Some of them seem to come back for me, so I use a free program called Spybot anti-Beacon. My PC W10 here, I chose all the blocks on the two pages of the vaccinations. Spybot gives you the opportunity to vaccinate on each boot, and I chose this option, just in case the MS updates affect the settings somehow.
-
How to change the new blue font color to the old yellow color?
Just started working in the latest version of the 2014.1.x CC body and they changed the font yellow (for things such as timecode) for a dark blue font color. This new blue is too dark, it blends into gray Panel colors, is more difficult to see what makes it less identifiable and is a strain on my eyes.
Where is the option to change this font to yellow color?
Thanks in advance!
Hi Geronimosan,
Sorry, you can't "restore" in this version. It is not a trivial task to allow this option as a preference either, unfortunately. Please inform the staff of your difficulties here: http://adobe.ly/ReportBug
Thank you
Kevin
-
How to change the new feature of mask/track after leaving the clip?
After you have created a mask ellipse or polygon with the new feature of filter, positioned where you want in the program Panel, then went to another edition, how later back and take this mask to move its position?
By clicking on it in the Panel of the program just seizes the entire image, not just the mask. Highlightingt the mask in the effect controls Panel does not seem to work either.
Any comments would be appreciated. Thanks in advance for your help.
Highlightingt the mask in the effect controls Panel does not seem to work either.
It is the way to choose the mask.
Restart the computer, restart the first while pressing SHIFT + alt up to the Welcome screen.
See if this will help.
-
Satellite U500 - how to change the graphics card?
Hello
I have a Satellite U500-C10 of the Australia and I am a serios gamer and I have found that I hace lots of lagg on my pc. I want to get a new graphics card and I just want to know what are the steps to opening the U500 to find the graphics card.
Thanks Jaso444
Hello
If I understand correctly, you have an Australian model, then you should visit:
http://www.MyToshiba.com.au/support
This is a page of pilot for Australian laptop models. Choose your model and serial number and download, then. UnRAR / unzip the downloaded file and install it by following the instructions on the screen
-
How to change the new tab loading behavior
When I open a link in a new tab, that it does not load, I have to go to the tab, click the address bar and press enter before the loading of the page. How can I change this?
Probably an extension is the cause? Try to see if it happens in the questions to troubleshoot Firefox in Safe Mode, please.
-
How to change the new hotmail format back as it was?
HOW WE TELL MSN NEW HOTMAIL FORMAT ABSOLUTELY SUCKS? IT TO THE TOP OF THE PAGE OF THE CRAMPING TERRIBLY AND MAKES THE UGLY FROM THE START USER EXPERIENCE. WHAT A PIG BRAIN DESIGNED THIS?
Hi robert to chesapeake
Check out this link. https://binglistens.uservoice.com/
-
Photoshop CS6 how to change the new behavior of the tool online?
After upgrading to CS6, the online tool behaves differently that I used to. Now it s something like the auto-align. I Don t know how to describe it exactly, but when I m trying to make lines at small angle it s impossible, because the tool is always "jump" to make completely straight.
This is a feature of CS6, a bug or it s only happens to me?
If you go to Photoshop (Edit) > Preferences > General and uncheck the box Snap of the vector tools and transformations of the pixel grid, which don't
make a difference?
-
Portege S100: How to change the RAID in the BIOS
Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.
This is the same as that recorded in this link: -.
[How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?
Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.If the second HDD was inserted and then change the RAID in the Windows operating system.
There should be a Toshiba RAID Console.
You can use this console to create or manage a RAID array.To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.
Maybe you are looking for
-
A Wi - Fi connection does not work on my Satellite L635-10 t
Help!I have reinstalled Windows on my laptop, installed all the drivers, but the wifi does not work! What can be with my laptop?
-
Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website
LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi Using IMAC OS 10.8.2 with all updates Netgear DGN2200v3 router using Printer not connect to the HP ePrint website Printer connects using
-
How can I activate my keypad?
Hello Since I bought my laptop (Acer with Windows 8) the pad did not work - as I have keys but nothing happens! How can I activate the keyboard? I tried to use the Num Lock key, but it did not help... I can use the keyboard to move the mouse on the s
-
My optical mouse 3000 does not work even if the red light is on in the background
My optical mouse 3000 does not work even if the red light is on in the background
-
At the same time the downloaded movies netflix has more audio. Device Manager does not display a driver of the camera when the camera is attached via firewire and running? I tried to reload the drivers and worked with the pilot web-based updates.