How to change the icon of the USB hard drive?

Similar Questions

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Cannot see the USB hard drive?

  Hello

  I created a new XP Pro VM environment and everything seems great so far, however, one of my devices is an external USB hard drive (this is where lies the VMX file).

  Yet I do not see it as a connected device, it is not in the list of devices to be tied down to the machine virtual host?

  Why am I unable to see this device USB of the XP Guest VM and how to make it visible?

  Thank you

  1DMF

  1. NOT to assign a USB device to the virtual computer - at least, do NOT attempt to use the disk USB us talk

  2 instead of this, make sure that you configure network between the host and guest

  3. create Windows shares on USB drive

  4. access to this sharing of the Interior of the guest

  This will result in the host beeing the only system that accesses the USB directly - which is the only safe way to do

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Satellite Pro P70 - Has: 2nd invisible HARD drive - how to initialize the 2nd HARD drive

  I have a P70 - A. Satellite Pro
  'Primary' hard disk failed, and has been replaced by the service centre.

  Now, only the main hard drive is shown and the Service Center said that I had to 'initialize' the second hard drive to make it visible. They assure me that the hard drive is there, just hidden.

  How can I make visible?
  How do I initialize it?

  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.

• How to add the new hard drive RAID 5 on

  I have Dell Powerdege 2900 server and I need to merge the new hard drive in a RAID 5

  Hi Sabry75

  If you have open Manage Server Administrator installed, you can do the merge from there. It's rebuild.

  You can refer to the guide to using OMSA below, look under the virtual disks of re-engineering/migration: -.

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Let us know how it goes.

• How to do the second hard drive as main hard drive and move the files to the first hard drive to the second.

  Original title: How to I can't remove my 1st hard drive program files?

  Basically, I got a new laptop for games with Windows 7 on it, and I know almost nothing about computers. So it all starts on my SSD (180 GB) and I want to move to my 2nd hard drive (750 GB) HHD. I want to keep windows and steam (platform game) on my SSD and move almost everything on my other hard drive.  When I move everything on it works, but when I try and do a right-click and delete the programs or program filex (x 86) it says I don't have permission. So I give myself permission and ownership of the program files, but it does not work. I tried to remove anything that did not come on the computer and what I just said try again, but it still does not work.  I have tried myself giving full ownership of readers, but it still does not work. He always tells me that I need permission from myself. Is any way for me to have my computer recognizes the HHD as the primary drive, and then I can move Windows and Steam my SSD? And all that would remove? (If yes let me know if I can put the drivers I have on a flash, so they are removed). Any help or advice would be great! Thanks for reading and you're time and effort!)

  P. S.
  Do not forget that I know little to nothing about computers, so just assume I know nothing and give me instructions step by step, if it is possible.
  May peace be with you,
  Alex

  Basically, you can not, you need to uninstall the programs, then custom Setup to the location/reader of your choice, even in this case a lot of files will always be located on your windows disk.

  When you install a program many entries are written to the registry, if you try to move a program, if you can, the registry entries will be incorrect then the program will stop working.

• WIN8 - how to change the recovery partition drive letter

  Just bought a laptop HP WIN8. I need to change the drive letter Partition Recovery to something other than a '.

  Like all of my computers, I partitioned (retractable) drive and put my files on disk would be "." But the recovery Partition occupies the player had "and won't let me change the drive letter.
  
  Can you help me? I'm sure that what I'm trying to do is a very common need. All previous versions of windows allow me to do that.

  Problem solved! I used this trick:

  http://community.Spiceworks.com/how_to/show/883-how-to-unlock-delete-or-remove-the-EISA-hidden-recovery-or-diagnostic-partition-in-Vista

  In the journal, I followed these steps to solve the problem:

  (1) I created a system full backup (117 GB) which included the recovery partition and placed it on an external USB. If I need to restore my computer I use the USB

  (2) I followed the steps in the link above to delete the partition.
  (3) I changed the drive letter of the partition that I created to a '

  "(4) I've now had 28 GB of unallocated space that I used to extend the drive would be"

• How to change the permission in drive c to change? lost full control access?

  Hello!!!

  I did a change in permission in drive c uncheck full control, modify, and write. now iam unable to change the permission for the same mistake and get by installing new software in the c drive, and change the permissions and it.

  Please help how to solve this problem. AS SOON AS POSSIBLE

  Thank you.

  What you were trying to achieve by changing the structure of permissions?

  What records treated you?

  Have a look here for a tutorial on setting up property and change the permissions.

• How to clone the current hard drive on the usb flash drive

  Hello, I would like to release our hard drives to the esxi 4.1 servers. Is it possible to clone the hard disk of 8 GB of flash with dd drives? How can I do if possible, that I know how to copy the small player to a larger but more for the little ones. Any help appreciated,

  You want to clone the install esxi on a USB?

  This could be done with dd - but only if the existing esxi does not use more of these 8 GB

• How t change the startup hard disk?

  I upgraded my hard drive to a 500 GB to 2 TB Drive with a hard drive, copy of the program, thinking I could copy my files to the new drive.

  Help. I need to start on my old HDD 500 GB.

  -Donald

  You could add the second hard disk of 500 GB as a slave and copy your files on the hard disk of 2 TB if its startup. If its not bootable, try to load Windows on it and install the 500 GB drive as a slave and copy your files:
  How to add an Extra hard - wikiHow You will probably need to take ownership of files and folders on the drive of 500 GB, before copying them to:
  How to: Make a file/folder in Windows 7

• How to install the new hard drive and windows key?

  Hello

  I have a aspire v5-121-c72g32nkk.
  I have just updated to Windows 10, don't panic, but I want to upgrade my HD drive to a SSD drive.

  You can find the steps to do this?
  Windows was preinstalled, how I reinstall on another drive?
  I have no serial key or whatever it is.
  I'm a bit lost, you have an idea?

  Best,

  There are several ways to do this, anyone have product keys, since

  If you want to do a clean install:

  Windows 7-8 - 8.1 keys are embeeded on your BIOS

  Windows 10 use a generic key during the upgrade, so just skip the steps questions about a product key and the first time you connect on the web, it will authenticate to.

  You must decide:

  (1) do a clean install of your operating system to factory

  (2) make a disk - image of the system image and reload

  (3) to do a clean install of windows 10

  option 2 is the fastest at the end, as you create a copy of your HARD drive and reload it to your PC.

  you need a bootable windows 10 (USB or DVD) media and little space on external HARD drive.

• MacBook retina cannot find the USB hard drive when it is plugged again

  Hello world

  I have a MacBook retina 2015 computers and a hard drive WD elements USB3 that I use as a Time Machine backup when they travel. The drive is plugged into the USB - C through one of the Apple dongles and when I first start the computer, the USB is mounted and that it appears on the desktop. He does everything very well.

  When I want to take the machine away, I eject it, wait for the secure message and then physically disconnect the drive. However, when I go back and reconnect the drive, the Mac did not see it. The reader will be able as the light comes on and I can hear it turn. Just, it is not mount and is completely invisible for MacOS.

  I checked all connections, even used another dongle - no luck. A disconnect does not set, and I tried to reset the NVRAM. So far, the only solution is to reboot the Mac, afterwards the player reappears - at least until I need to unplug it again.

  Anyone got any ideas what is underway and if there is a fix?

  Thank you very much

  Mike.

  Hello, Mike Richards2,.

  Thank you for using communities Support from Apple!

  This is I think understand that you are not able to see an external hard drive when it is ejected, and then reconnect the computer.  I have some suggestions that I hope will help you.

  It is important to try to isolate what is responsible for this.  The first thing to do to help isolate what is causing the problem is to start the computer in what is called Safe Mode and see if the problem persists.

  Start in safe mode:

  1. Choose the Apple menu > shut down.
  2. After your Mac stops, wait 10 seconds, then press the power button.
  3. As soon as you hear the startup tone, hold down the SHIFT key.
     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  OS X El Capitan: start in safe mode

  Once the computer is running in safe mode, see if you can duplicate the issue.  If the problem does not appear, go ahead and try to reboot normally again.  If the problem has disappeared, it may have been caused by a problem of file or directory of cache fixed by booting in safe mode.

  If the question comes up, you'll want to check the login items.  Follow these instructions to remove the connection:

  OS X El Capitan: If you think you have incompatible connection points

  Remove the connection, restart the computer and see if the problem persists.

  Have a great day!