How to change the infrared port on Satellite M30 to be IrDA to be direct IR?

Similar Questions

• How to activate the Infrared Port on the Satellite X 200

  Hi all, I'm Italian (sorry for my English...)
  How Activate/activate the infrared port on my X 200?

  It seems that is not properly working, infact, all devices ir in the area are not recognized?
  Annex 'Device Manager'-'Network adapters' there is only 'WIFI LINK and Realtek '.

  Thank you all

  Hello

  As far as I know the X 200 supports a consumer Infrared Port.
  This isn't the protocols series infrared (SIR) or Fast Infrared (FIR) that can be used to transfer files over several other Toshiba laptops.
  Protocol Consumer IR (CIR), can receive commands from the remote control

  See you soon

• How to change the rmi port in atg

  Hi guys,.

  How to change the rmi port in atg

  who is the component to change port rmi in atg?

  The rmi port is defined in the component/atg/dynamo/Configuration. so in this Configuration.properties, you can change the value of the rmi port.

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• How to change the DB port

  Hello
  I have two instances on the same server AIX 5 L.
  One is a 10g, and the other is Oracle retail RMS.
  Now, I found that the DN listener's 1521 port.
  The other RMS appl is on the same port 1521.
  How can I change the port of the DB 10 g.
  Is there a way out?
  Thank you

  The note mentioned above does not have to change the ports in the application. It aims to change the channels only database (or host name), it should be applied here.

  What you need to do is the following:

  -Stop application services
  -Change the port of database in listener.ora and tnsnames.ora
  -Bounce of the database and the database listener; Make sure that you can connect to the database using the new port
  -Change the port of the database in the context of database file
  -Start AutoConfig on the database layer node
  -Bounce of the database and the database listener; Make sure that you can connect to the database using the new port
  -Change the port of the database in the application context file
  -Start AutoConfig on application-level nodes
  -Start the application services

• How to change the motherboard on my Satellite L655D password?

  I need to change the password on my laptop Toshiba Satellite L655d motherboard, but I don't know where I can.
  I'll be very grateful if someone can help me.

  Concerning

  Full Saravia

  Password motherboard, you mean the BIOS password. Right?

  First of all, he must know the old password you?
  If you do not know the old password to the BIOS, you will not be able to remove this
  In this case, you will need to contact the ASP from Toshiba (service) in your country.
  The technician would be able to remove an unknown password.

• How to change the DD in a Satellite CL10-B-100

  Hello! One night I closed my laptop down normally. The next morning, it wouldn't start, boot disc error.
  So I started on a Win 8 DVD to fix it, but he didn't see C:

  I think that SD is out (I think this is a record of MEM) if I tried to open it to change the DD or test it on another computer.
  I could disassemble the back but I don't see the DD. So I guess it's just behind the keyboard.
  But I don't know how I can get to him.

  I tried a manual but I can't find.

  Can you explain to me how I can change the DD?

  Thank you very much!

  Hello, a little for my question. I want to change the disk because the computer does not start: introduce a system startup disk... But where's the record?
  Help, please!

  Thank you very much!

• How to change the http port in EBS 12.1.3

  Hi all.

  I configured App & DB to use the port 9 pool during cloning.

  For some reasones, I need to change the port http request 8008 to 8,000, but DB port must remain 1529.

  If I may continue the document: https://support.oracle.com/epmos/faces/DocContentDisplay?id=760590.1 ? My version of the EBS is 12.1.3.

  So I need only change my CONTEXT.xml lines (as in the example below) and run the automatic configuration on the Application layer? :

  < web_port oa_var = "s_webport" oa_type = "PORT" base = "8000" step = range "1" = "-1" label = "Web listening Port" > 8000 < / web_port >

  < activewebport oa_var = "s_active_webport" oa_type = "DUP_PORT" base = "8000" step = range "1" = "-1" label = "Active Web Port" > 8000 < / activewebport >

  < login_page oa_var = "s_login_page" > http://myhost.Oracle.com:8000/OA_HTML/AppsLogin < / login_page >

  < chronosURL oa_var = "s_chronosURL" > http://myhost.Oracle.com:8000/oracle_smp_chronos/oracle_smp_chronos_sdk.gif < / chronosURL >

  < oa_var = "s_endUserMonitoringURL" > http://myhost.Oracle.com:8000/oracle_smp_chronos/oracle_smp_chronos_sdk.gif < / EndUserMonitoringURL >

  < externURL oa_var = "s_external_url" > http://myhost.Oracle.com:8000 < / externURL >

  < httplistenparameter = "s_http_listen_parameter" > 8000 oa_var < / httplistenparameter >

  Thanks in advance.

  Hello

  The approach that you mentioned is correct.

  The document that you referenced is to follow in this case.

  Kind regards

  Bashar

• How to change the headphone port #?

  ENV: Oracle 10 g 2, RHEL 64 bit on ASM (10gr 2):

  Current listening port is 1521. I was asked to change it to 10526 (please don't ask why :-)).)

  I tried to change the port number in the listener.ora file, then restarting the listener, but the I start getting ' ORA-12541: TNS: no listener ' error. If I change back to 1521 and restart the receiver, I am able to connect to the database. What else should I do to change the posrt # please?

  After I have change the port and restart it, here is what I tried to test:

  $ sqlplus user/password@sid

  ...

  ERROR:

  ORA-12541: no listener

  Enter the user name:

  When I restore the port # change, I am able to connect.

  Help, please.

  Best regards

  Very strange, LISTENING means that a listener is sitting on this port, so if you have not the 1521 and it works... I don't know, something is off – try to grep netstat for LISTENING.  If you have it on 10526 and this does not work, prolly local recording listener/static issue the other mention.  Also, the idea of the listener should wait for a connection request and then pass to another session-specific port.  No listener error means you have until now, but something bothers me about this, I know not what.

  Please copy and paste all the production of the lsnrctl commands, to obscure details can be important.

  Just to be clear, we don't talk to some listeners, ASM, right?  (Or conversely, they did not something rac on the upper port?)

• How to change the VXLAN port in the NSX Manager?

  Hi Expert,

  I use the NSX 6.2.2 Manager and the default value for the UDP VXLAN port is 8474.

  I want to change it to the default 4789 UDP IANA port.

  How can I do?

  Thank you very much

  Mike

  Also, if you want to not upgrade for some reason that you should be able to change it via the API documented in this here blog call

  NSX for vSphere and number of Port UDP VXLAN - Stretch Cloud - undressed technology

• How to change the module RAM in Satellite Pro A100 (PSAACE)?

  Hey,.

  I just bought a RAM module to fit in my currently empty home of RAM, but I never installed any portable computer memort before that. I checked a few guides, but none seem to show the kind of clips that have the Pro A100.

  Could someone help me please by pointing me in the direction of a specific guide or taking their time to explain the process.

  Thank you in advance.
  Jason

  On the side at the bottom in the middle is placed the memory cover. Remove it and you'll see two memory slots there. I assume that your device comes with the memory module and new you must put in the empty socket and just press it. Two metal brackets will fix it in the right position.

  That's all you need to do. By the way: before you start doing anything, I recommend you disconnect AC power and also to remove battery.

• How to get the 'factory settings' on satellite M30?

  I just tried to set my laptop back to the original configuration by using the restore CD. Unfortunatly just before the process an error message is displayed. There seems to be a scratch on the second CD, I guess that's the problem.
  I've been in touch with toshiba and they said they will send replacements but there is a delay, and it will take several weeks.
  I can't really afford to wait that long to get my laptop working again, are there any ways to get around this? I was wondering if I used the advanced option could I select only to install enough components to get it running, so does not require the second CD, or at least it damaged the part of the Conference on disarmament. It would probably be a temporary measure until replacements arrived.

  Any advice welcome.

  Thank you
  Geoff

  Hello Geof

  Restore CD provided you can install new OS. There is no option for any type of repair just clean OS installation operating system.
  There is nothing to do at the moment. Before the start of the procedure for recovery of the disk HARD will be formatted and in your case, it's already done. There is no chance to fix whatever it is, whatever that means clean OS can be done now.

• Satellite A100-727: how to change the config of media buttons?

  I have a Toshiba laptop Satellite A100 727 and it was these media buttons Nice on the left side of the key board.

  They are great, but I have no idea how to change the keys.
  I had put them to launch internet and exploited with mediaplayer, but after that I had to do reinstal windows, my harddisck crashed, functions on the buttons has changed, they start up the InterVideo WinDvd.

  Does one know how I can change the functions of the buttons?
  I read something about the tools of Toshiba, but I can't find them anywere.

  TYVM in advance

  Hello

  Using TOSHIBA button controls, you can set the key features. If you have it installed you can find the TOSHIBA controls icon in the Panel.
  You can also find if you open TOSHIBA help > Optimize.

• Satellite U400 - 15G - overheating-how to change the cooling module?

  Hello

  My Satellite U400 15 G is overheating (CPU up to 70 ° c). NEITER in Google nor in the manual, I can find a statement, how to open and change the cooling module. (I'm only trying to change mine, because garranty is already gone)

  Does anyone know how to open the laptop/notebook and how to change the cooling module?

  Thanks in advance

  Post edited by: bla42

  Before you continue just a matter of discussion:
  Let's say I help you with this and damage you something or broke a plastic part, what you will do in this case?
  I mean you probably know that you can get a few small important parts as separate components.

  By the way: this description may be provided in the manual. Disassembly of the laptop is authorized personal only. When you buy a new car it is no description how to disassemble the entire engine, right?

  By the way: Jeanine's right. See this page. There are many useful tips on laptop disassembly procedure.

• How to change the cooler on Satellite M30-344?

  Hello

  IA´m lucky enough with my Satellite M30 - 344, but 2 months the cooler starts to become stronger every day. Is it possible to change the cooler on mine and how expansive is the original cooler? Do you know anything as a tutorial for the change process?

  Originally from 2 256 parts MB of Ram is installed. Now ia´m think about a bigger total RAM. As far I know are only 2 slots for RAM, or I'm wrong. Is it possible to install two 1 GB RAM pieces?

  Thank you very much for your help!

  Hello

  The replacement of internal devices is not easy and a little risky.
  I wouldn't recommend replacing the cooling module yourself.
  You might damage it something on the map and as you know the motherboard is costly parts of the laptop. The manuals are not published because these documents are only for technicians and service partners.
  So I think you should ask a service partner to help him because these guys have more experience in these procedures.

  I found a site online with the memory modules for Satellite M30 344
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6958&ft=m&St=3

  It is said that it of possible to upgrade memory to 2 GB max. That's why I think that it of possible to use module 2 x 1024 MB.