How to change the keyboard on Tecra S

Similar Questions

• How to change the keyboard on Portege M300-101?

  Hello

  I have a Portege M300-101, and I would like to know if there are instructions online for how to change the keyboard itself. Our unit comes with, I think, a Belgian keyboard installed... and a U.S. keyboard in the box. Are there instructions available for how to move on the keyboards? Also, I guess it's a good idea to switch the keyboard before turning on the laptop for the first time. Do you agree?

  Best,
  Dainis W. Michel

  Hello Danis

  Unfortunately there is no public document on this subject. You can try to do it alone, but please don t forget that on this guarantee valid path will be cancelled. Basically, the replacement of keyboard is not well complicated and technicians may need 15 minutes to do.

  In my opinion, you can take a risk and pay for replacement before losing the valid guarantee. The Portege is very expensive and of damage to property, it is very risky to be unsecured.

  If you still think that you do not write anything again.

• I need to change the keyboard on Tecra M5

  Hello

  I need to change the keyboard on a tecra m5.
  Unfortunately, this is not mentioned in the manual how to do this.

  Please advice.

  Thanks in advance for your help.

  Best regards
  Wim Gijsels

  Hello

  I think that it s not mentioned in the manual, because I should only be made of professional technicians for laptop

  In any case, a friend of exchanged me the keyboard and told me to remove the keyboard first support. Who s the plastic cover between the keyboard and LCD display. So open the LCD screen and use your fingers on both sides and lift the keyboard bracket. There are two screws that attach the keyboard under the door-keyboard. Remove the two and lift the keyboard. Last but not least remove the keyboard plate to remove the cable from the keyboard connector.

  As you can read it's not that complicated and I hope I could help a bit! :)

• Satellite P300 - 1DT PSPCCE - how to change the keyboard

  Hello

  I am looking for documentation of disassembly for my laptop.
  I need to change the keyboard. I have 2 letters that are broken.

  Thanks a lot

  Clickservce

  Hello

  Disassembly guides are not for the public, you can download the manual on the official website of Toshiba. I've never seen there other documentation.

  In any case, exchange of keyboard should not be complicated. Just remove the keyboard between the speakers and the keyboard stand. After that, you can lift the keyboard itself but be careful with the keyboard under the keyboard cable. You must remove it also.

  Good luck! :)

• How to change the display on Tecra 8100 drivers?

  I downloaded the driver for Tecra 8100 my girlfriend updates, but I can't figure out how to install them. The laptop is running Win2k sp4.

  I tried the 'normal' method of "update driver" and then selecting the new pilots, but Win2k still find the original drivers and not the new drivers.

  I also tried to unpack the new drivers in the folder that contains the original drivers and replace the files in duplicate. I zipped the original file so that Win2k couldn't see the original files. I then tried to run the Setup program, but the future restart the card was not detected. It is only when I unzipped the original files once again that the new map was suddenly, and v5 drivers have installed again!

  I really want to install drivers v7 - everyone has ideas on what goes wrong? can someone give me a step by step guide how to go V5 to v7?

  See you soon,.
  Dan.

  I forgot to mention - I tried to launch uninstaller to S3, but seems not to do anything.

  All advice appreciated!

• Re: Satellite P870 - how to change the keyboard backlight ON?

  We can see from the Web from Toshiba as Satellite P870 site (and other series like P850, L870, etc.) are NEW backlit keyboard. How to service this backlit?

  FN - Z does not work. Also, I do not see any symbol associated with this function on the keyboard of my P870. It is also very strange due to the fact that my P870 has all the other features "fantasies" (good screen, sound, Blu - ray, HDMI, Eco option connector (backlit keyboard does not respond on on / off Eco).)

  Thank you

  Hello

  Can you please post exact model laptop (P870-xxx)? I just want to check the specifications for your model of laptop.
  The small keyboard symbol is laced on the Z key?

• How to change the keyboard on iPad

  iPad 3. iOS 9.0.2

  The present layout of the keyboard is QWERTY, but I need to change it for accented AZERTY. I did that in 'General', 'Keyboard', 'keyboards","French","Accentuated QWERTY"and got a tick against this choice

  It did not work (on screen keyboard remained QWERTY even by turning the device off and on again) so I changed the country of France (more), but it still doesn't work. What should I do?

  In addition, equals the accented QWERTY as I have on my Windows laptop with about 15 symbols (| ☺ ~ ^ μ ² etc.) are not on a QWERTY keyboard?

  Try this: http://osxdaily.com/2013/06/09/change-keyboard-layout-ios-qwerty-azerty-qwertz/

• How to change the keyboard shortcuts?

  Problem:

  Keyboard shortcuts as increase and decrease brush size by Cmd + [and command +] (and many others) only works on English American keyboards. The hooks on the Swiss German keyboard are accessible by Alt + 5 for [Alt + 6].

  Cmd + Alt and Alt + Cmd + 5 and 6 do not work as expected.

  On the keyboard of the SG are at the position where you will find on the US keyboard [and] the letters o on the [position and a on the] position.

  (a) where I can change this , the Swiss German, keyboard Cmd + ö, u and Cmd are used as decrease or increase in the size of the brush?

  (b) Solution for future releases:

  • Adobe developers should get rid of verification of the special functions in ASCII code. Isn't is no longer using the ASCII code for special functions.
  • It is for each key on the keyboard as a code Scan, which is independent of the language, region, and keyboard settings.
  • The problem is, that the world, the community of developers is to use keyboards french and put on the page, so they have unfortunately never aware this problem.

  If you check special functions by scan code instead of the ASCII code, this problem will no longer exist. For example, the analysis codes for Cmd + o - US keyboard is Cmd + [-is ALWAYS the same, independent of the keyboard settings or any other language or country.]

  Scan the code = return code independent of the keyboard, it's a kind of 'coordination' of the button pressed

  ASCII or Unicode = depends on keyboard, character on the "xy" scan code position key is returned and it's different for each keyboard layout.

  Please pass on to the developers.

  Cheers & CU,.

  Roland

  You can create your own shortcuts under Edition > hotkeys (probably in the menu of Photoshop on Mac).

  I have a Norwegian keyboard and have created several shortcuts with letters æ, o, a.

  Shortcuts to increase/decrease brush size is under shortcuts for tools.

  

• W xp on drive: how to change the keyboard driver?

  I installed xp W on the player and it seems to work well, except that the use of the keyboard is now a bit eccentric. How install W xp the procedure suggested to install the German keyboard. It was almost, but unfortunately not quite correct. The driver installed is related to this here keyboard https://en.wikibooks.org/wiki/German/Appendices/Keyboard Note the remark under the figure: "keyboard German and Austrian, but remember that the Switzerland does not use this provision." My computer is acually have it 'weird', namely the Swiss German keyboard as shown here https://commons.wikimedia.org/wiki/File:KB_Swiss.svg I have the chance to finally get a good driver working?

  FYI: Looking at the keyboard drivers installed in my W7prof says:

  i8042prt.sys

  Kbdclass.sys

  VMkbd.sys

  I presume that the last two drivers when added during the installation of the player.

  Just in case someone stumbles across this thread. Before you ask here for help, I tried to solve the problem by adjusting the settings language/region under W xp on the drive. Do not have I managed blaimed VMware who installed a wrong driver. I'm ashamed to admit that the problem was not VMware, but rather me do not have w xp, the language/region settings properly adjusted. Now being how it is supposed to do, the keyboard works fine. I'm sorry.

• How to change the HDD in Tecra R10 - 10W - any instructions?

  I would like to install windows 7 on my laptop R10 - 10W, but for now only for test.
  I would like to save my current installation of Windows XP on my HARD drive.

  The simplest solution is to change HARD drive but this laptop has no available HARD disk. :-(

  I tried to boot from the HARD drive connected via esata, but it is not functional. :-(

  Anyone have an idea?

  Thanks Karel

  > More simple solution is to change the HARD drive, but this laptop has no available HARD disk
  What do you mean by inaccessible HARD drive?

  If you want to install the Windows 7 only for the test then you don t have need to change the HARD disk or delete the Win XP from the HARD drive.

  One solution might be to an installation of Win 7 on the second partition.
  Create a partition on the HARD drive using a 3rd party like Partition Magic 8 tool. This great tool and allows you to create and manage the partition.

  Another option would be the use of virtualization.
  You know the Virtual PC?
  http://www.Microsoft.com/Windows/Virtual-PC/

  It helps you to install each operating system that you want on the HARD disk without having all partitions.

• Re: Satellite P870-32F - how to change the keyboard of enlightenment?

  * Hello, *.

  * Here I am new in this circle, with perhaps a simple kind of question: *.

  * I bought a new laptop (Toshiba Satellite P870 - 32F Type) a few weeks ago. The describtion of the mentioned book, there is the option to turn on the keyboard unique.* LED lighting

  * This is why you must choose the Fn - button and * Z *? *

  * Well, I luckily with success so far. I tried almost all kinds of combinations, but West still no light on... maybe my book doesn´t have this kind of extra.*

  * Does anyone have any idea what would be useful? Looking forward for your answer, thanks.*

  The small keyboard symbol is placed on the Z key?
  If this is not the case, your keyboard doesn't have keyboard backlight.

• How to change the keyboard shortcut to navigate through the tabs open in PS and AI CC 2014

  I'd love to put my own keyboard shortcuts to navigate through tabs open in PS and AI 2014 on OS X. I found out that this can be done with ctrl + tab to the PS, but I couldn't manage to make suggestions to the work of the forum of the AI. As said, I would like to define a 'standard' shortcut more like alt + cmd + arrow key at the same time of applications. If this shouldn't be possible, does anyone know a shortcut in AI CC 2014?

  Thank you very much!

  Amadeus

  In Illustrator, in my view, you can set these shortcuts in Edit > keyboard shortcuts > Menu commands > funny

  (illustrator can be also command-F6)

  Fact command + ~ (tilde key) work for you in photoshop and illustrator?

  I don't think you want to use alt + cmd + arrow key since it's repositioning/moving objects

• How to change the configuration of keyboard U.S. / UK?

  Hello

  I just bought a Lenovo G550 and very nice it is too.  It is of course set up with a US keyboard and I'm in the United Kingdom.  This means that on the keys of my @ is a "and the sign of my Sterling is a #."  Yes I know that I can use the "make a @"

  and I can't 0163 alt to create a symbol of the book, although it doesn't let me do in this post?  Is there a way I can change the settings of the keyboard in the UK please.

  When I type the cursor often also begins in another part of my document which means what I'm typing needs a constant correction.  I thought at first it was just in the open office b

  UT it does on th

  is the forum see!  It also does in my emails which is hotmail.  Can someone help me please?

  Moderator edit: matched subject to question.

  I do not know if I understand, but you are looking for how to change the keyboard from US to UK in Windows? If this is the case, go into the control panel and the locale. There, you should be able to add any other keyboard layouts or remove them as well as set a default value. Under regional settings, there are other parameters that you can change if you are in the United Kingdom.

  -gan

• Satellite Pro C660-167: someone knows how to change the sensitivity of the keyboard?

  Anyone know how to change the sensitivity of the keyboard? Having real problems when entering laptop missing letters. !
  Very annoying!

  Hello

  I think that this problem could be solved by the BIOS updated.
  Please take a look on Toshiba European driver page and download the latest version of the BIOS.

  I read here in the forum to the similar topic with another series of notebook and the BIOS update does work.

  Good luck

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).