How to change the number of appellants music hear when they call me?

Similar Questions

• How to change the number of minutes for the exercise of the activity of the application

  How to change the number of minutes for the exercise of the activity of the application

  Hello

  It is not currently possible to change the goal of daily exercise.

  If you want to suggest that Apple consider adding this option, you can submit a request here:

  https://www.Apple.com/feedback/watch.html

• How to change the number of values in the hour that are restricted.

  Hello

  May I know how to change the number of values in the hour that are restricted.

  In fact, we have improved of obiee in obiee 11g 10g. Data base is the same for Both.In 10 g the prompt value is limited to show only 35 records per page. As we passed it shows only 35 Records in 11g also. How can I change this limit to 11g.

  Please suggest me! Its urgent!

  Thanks and greetings

  Navnitha

  Hello

  In the advance tab we have the XML of the upgraded report, copy it into a Notepad and try to find the line beginning as below

  In 10g, we have something like below, simply remove the choicesPerPage = '35' from 11 g OBIEE XML report

  Thank you

  RAM

• How to change the number of tabs pinned when I open a new tab?

  Before today, I have easy access to 8 tabs pinned on my page tab and now I have only 4 and I can't change it back. What was changed and how can I change the number of pinned tabs?

  "What was changed and how can I change the number of pinned tabs?"

  The css for the margins and tiles has been changed. Try Zoom Out = {Ctrl liked-} to see more tiles. I need zoom back twice to get a 2nd rank.

  Or use this extension - https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/ - for more control on what is and what is not displayed on the new tab page.

• How to change the number of cards of the microsoft object klondike solitaire

  Hello:

  How can I change the number of cards dealt in the lonely Klondike to win 8?  offers 3, wants always to face 1.

  Ed

  Take a look at this article

  http://boardgames.StackExchange.com/questions/9586/can-i-deal-just-one-card-at-a-time-in-Klondike

• How to change the number of processors / cores

  I have virtual machines that I have to move periodically between 3 computers main host that I use:

  1 Intel Core 2 Quad CPU with Windows 7 Home Premium 64 - bit - 1 processor with 4 cores

  2 Intel Core i7-2630QM CPU with Windows 7 Home Premium 64 bit - 1 processor with 4 cores

  3 Intel Core 2 Duo T7700 CPU VT with Windows XP 64 bits - 1 processor with 2 hearts

  Hosts running VMWare workstation 7.

  Most of my virtual machines running XP 32 bit and have been initially created for my 3 platform.

  When I move my machines between computers I see that the parameters of the Virtual Machine for my change of processor in (for me)
  in unpredictable ways. Sometimes it shows 1 processor and gives me a choice of up to 4 cores.
  in other cases (always on a 4 base platform) 1 single processor with 1 core, in other cases, with 1 core 2 processors.

  In most cases, my freedom of choice is limited, because the selection of the number of cores is grayed out.

  When I try to make changes by editing the vmx file, I find them ineffective (no change).

  The other problem I think is that my VMs run VERY SLOWLY on my i7 with 8 GB platform!
  I have no idea if this is related to the improper setting of the number of processores / cores (I'm not able to define
  1-4-hearts and spin with settingsd 1.1 instead).

  Could someone please help me understand how:

  1. check / change the number of processors / threads on an existing virtual machine.

  2. how to set properly for an i7 processor

  Thanks in advance,

  Andrew

  1. providers that create virtual machines are in a race - they assume that customers use this version which proposes to use the virtual processors more ;-)
  For some workloads inside a virtual machine - say Oracle or other database and applications servers such that it is sometimes really good idea to use more than one virtual processor

  2. virtual machines to scale differently with more CPU than the real computers.
  Virtual machines are for host applications.
  This means that the host schedules the time CPU to each virtual machine.
  If you follow this thought that you will see that a virtual machine that uses one virtual processor has a greater chance to run then a VM with 2 virtual processors.
  A VM with 4 cores running on a host with 4 cores will spend a lot of wait time - it may work only when the host reports the application of Workstation 4 hearts are available.

  A virtual machine with only 1 vCPU will probably be able to run all the time without any waiting time.
  This is why usually with a single CPU VMs feel better to the needs of the user.

  This translates into the best practical advice: assign a CPU unless you really notice you need more.

  3. probably, you try to change the values, while the virtual machine is suspended?

  4.
  numvcpus = '8 '.
  cpuid.coresPerSocket = "4".

  We hear two processors with 4 cores of each

  numvcpus = "4".
  cpuid.coresPerSocket = "4".

  means a processors with 4 cores

  numvcpus = '2 '.
  cpuid.coresPerSocket = '1 '.

  We hear two processors with a carrot

  No effect? n ' mind that not all clients can use 2 or more processors
  For example, XP is limited in this respect.
  Some guests may also not change the number of CPUS after what they have been installed

• How to change the number of default weblogic Portal port

  Hi all, I would like to change the number of port weblogic portal server by default to 80 in order to test.
  
  (1) can I change like that
  (2) in the affirmative, please let me know how to do this.
  
  I went to the file config.xml and search 7001, not able to find something with this number, able to see 7002. (The SSL port).
  
  Please put some light on this.
  
  Thank you very much
  Peter.

  Hi Peter
  1. Yes, you can change the default port 7001 to something else.

  2. If you have default Port 7001, it will not appear in the config.xml file. There are NO labels. So yes, when you searched 7001 you find IT. If you change the default port, you will have entered as shown below. If you change the default port, these port tags are shown in the config.xml file.

  3. stop the servers. Make a backup of the config.xml file. Within the tag xml from the server, as shown below, add these 2 labels carefully. Save the config.xml file. Restart the server. NOW, this means that your administration console is running on Port 80.
  80
  true

  Example of file config.xml with the default port changed to 80

  
  AdminServer
  
  AdminServer
  true
  demoidentity
  {3DES} qxEhrfmANIITdpvPld0Uvk5i/rPNDAmZ
  
  80
  true
  ...
  ...

  NOTE: You can also change of administration Console. Choose your thinking, the servers and the AdminServer. In the main, first tab and then click on lock and change change the default port 7001 to 80. Record. Click Activate. Immedialtey you will get errror Page not found. Because the url is still having 7001. You manually change the port of the url to 80. You will again see console. If I prefer, stop the server. Edit the config.xml file. Restart the server.

  HTH
  Ravi Jegga

• How to change the number of items in number to Boolean, function VI table

  Hi, I'm working on using the digital output of data acquisition to control the digital input of a DAC, and I used the Number function in Boolean table. VI to convert the number to a Boolean array. The maximum number is 4096, so it must be composed of 12 elements.

  For the description of the VI, it is said that Boolean matrix returns a table of 8, 16, 32 or 64 elements, according to the number of bytes in the whole. Therefore, I change the number of channels in the task to 16, but it still does not work. The suggesitions are greatly appreciated.

  Thank you!

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 12
  Number of data channels : 32

  Task name: _unnamedTask<1B>

  Once you have the array of Boolean, you can resize using table tools. For example you can use the "new range" with a length of 12 to pad the table of 12 elements of Boolean values (you can also use a subset of table).

• How to change the number of records from the 25 to the different number?

  Hi friends...
  Generally, table 25 records at a time, and if registration exceeds the number there is a next button appears below the table. I need to change the number of records? Help, please.
  
  Thank you

  Hello...

  Try this, in the instanceconfig.xml file,

  
  

  
  50
  
  

  It works...

  Thank you & best regards
  Kishore Guggilla

• How to change the product ID of Windows 7, when you put the disc in the other PC

  I PC_1 with an SSD and a valid license of Windows 7 OEM (HP).  I want to put this SSD in a new, more powerful PC_2.  PC_2 holds a valid license of Windows 7 OEM (Packard Bell).

  My thoughts are:

  1 use Double driver to make a backup of all the PC_2 drivers.  Use ABR Activation Backup and Restore to save the certificate key and activation license for W7 on PC_2

  2 put the SSD in PC_2 and change the license key and activation of the certificate (it has the PC_1 keys/certificates) to the PC_2 keys/certificates

  3. install missing drivers to disk backup Double.

  The problem is How to change the key/certificate in step 2?

  Of course I could rebuild W7 on the SSD and give him the key to license PC_2 for the reconstruction, but that would mean reinstall all my other programs that I prefer not to do so.  I downloaded and still have, a copy of W7 iso website digitalrivers if this can help.

  Thank you

  Put the SSD from PC 1, PC 2 and startup, update drivers, and change it to the product key located on the certificate of authenticity.

  As long as they are running the same edition should not be a problem.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• How to change the number of "windows recently closed" that appear in the menu "history"?

  The maximum number of "recently closed windows", I have 3 are available in my menu "history". How can I change the options to get more than that?

  Hello

  You can try to click right and change the value of browser.sessionstore.max_windows_undo in Subject: config.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.

  Subject: config entries

  The add-on Descriptions of config adds comments of useful source in topic: config.

• How to change the number of unit and Master/watch on PC8164

  Hello!
  I have a stack with only two switches that have this configuration:

  Physically pass over: is asleep, and have the unit # 2
  Physically go under: is the master, and have the unit n ° 1

  Now, I want to change manually or in some way:
  1. I want to change unit number, so switch that is greater than 1 unit
  and put below to have the unit # 2

  2 change the master unit of switch below, above

  I can do these?
  Kind regards!

  CLI command "to initiate failover" translates into a warm restart of the master battery and triggers the unit to take over as master.

  stack of console (config) #.

  Console (config-stack) # initiate failover

  Use the command "becomes the" renumber units in the stack.  Example:

  console (config-battery) switch # 4 renumbered 3 (this command will be renumbered 4 unit to be unit 3)

  It won't let you set up a unit number already used, so you will have to shuffle unit 1 to 3 to "liberate" the unit number so that you can do unit 2 unit 1 temporary unit.  Then you can do the temporary unit 3 unit 2.

  I hope this helps.   B

• How to change the number of tab in a Canvas tab?

  Hello :)
  answers please?

  user9068133 - released: November 3, 2010 14:42

  Yes, it works very well on form 10g, I know that's not a big deal, but what I can do! I googled how to do this, but I found nothing. >
  What exactly did you search on Google? What is 'it '?

  You try to add several tabbed pages to a canvas of tabs with forms Builder? If so, user13390506 is sort of right. Click on the "Pictures" of the press of the Navigator object node the *Green + * button to add a new Web "Content" of your form. Now, you must open the new canvas property palette and change the "Canvas Type" property to "Tab". You will notice that the icon of the new canvas, that you created in the browser of the object has changed. Click on the + node next to your new canvas "Tab" to reveal the node 'tabs '. Yet once, open this node (clicking on the +) to reveal the individual tab pages. By default, the forms will create two tabbed pages. You can add a tab page in the "Tabs" node by clicking on the node and then clicking on the button +. To remove a tab from the "Tabs" node page, click on the tab page you want to remove and click on the *Red -* (button less).

  If you try to add a new page in the tab during the execution of the form - as I said - it is not possible.

  Also, what is your version of forms?

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• How to change the number of photos in slideshow?

  Hello, I tried a very bloody day to change the settins in the Adobe Bridge CS4 webgallery to show all the impressions of 33... what it will do is 10! WHERE are you going to change that? Itried the ED.... preferences... but there will always be nly create a slideshow with 10 photos... TY for your help... and also... How to load the gallery when done on my Web page content section? I don't see where I can work on the edition code... I also want the larger image slideshow to be BIGGER than the extra-large as shown...

  Thank you

  Bridge will display only 10 images in "Preview" mode You must save the Gallery to include all images. Yes, it's a PITA, but what you see is the one specified.

  To get answers to your secondary issues, I suggest you ask on the forum of http://forums.adobe.com/community/bridge bridge

• How to change the background color of a line when you have the selection of cells in tableview?

  I have a tableview and I chose the selection of cells. How can I change the background color of a line, if I select a cell?

  The usual example using:

  import javafx.application.Application;
  import javafx.beans.binding.Bindings;
  import javafx.beans.binding.BooleanBinding;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.beans.property.StringProperty;
  import javafx.collections.FXCollections;
  import javafx.collections.ListChangeListener.Change;
  import javafx.collections.ObservableList;
  import javafx.collections.ObservableSet;
  import javafx.css.PseudoClass;
  import javafx.geometry.Insets;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.Label;
  import javafx.scene.control.SelectionMode;
  import javafx.scene.control.TableColumn;
  import javafx.scene.control.TablePosition;
  import javafx.scene.control.TableRow;
  import javafx.scene.control.TableView;
  import javafx.scene.control.cell.PropertyValueFactory;
  import javafx.scene.layout.VBox;
  import javafx.scene.text.Font;
  import javafx.stage.Stage;
  
  public class RowHighlightedCellSelectionTableViewSample extends Application {
  
      public static void main(String[] args) {
          launch(args);
      }
  
      @Override
      public void start(Stage stage) {
          Scene scene = new Scene(new Group());
          scene.getStylesheets().add(getClass().getResource("selected-row-table.css").toExternalForm());
          stage.setTitle("Table View Sample");
          stage.setWidth(450);
          stage.setHeight(500);
  
          final Label label = new Label("Address Book");
          label.setFont(new Font("Arial", 20));
  
          final TableView table = new TableView<>();
          final ObservableList data =
              FXCollections.observableArrayList(
                  new Person("Jacob", "Smith", "[email protected]"),
                  new Person("Isabella", "Johnson", "[email protected]"),
                  new Person("Ethan", "Williams", "[email protected]"),
                  new Person("Emma", "Jones", "[email protected]"),
                  new Person("Michael", "Brown", "[email protected]")
          );
  
          table.getSelectionModel().setCellSelectionEnabled(true);
          table.getSelectionModel().setSelectionMode(SelectionMode.MULTIPLE);
  
          final PseudoClass selectedRowPseudoClass = PseudoClass.getPseudoClass("selected-row");
          final ObservableSet selectedRowIndexes = FXCollections.observableSet();
          table.getSelectionModel().getSelectedCells().addListener((Change change) -> {
              selectedRowIndexes.clear();
              table.getSelectionModel().getSelectedCells().stream().map(TablePosition::getRow).forEach(row -> {
                  selectedRowIndexes.add(row);
              });
          });
  
          table.setRowFactory(tableView -> {
              final TableRow row = new TableRow<>();
              BooleanBinding selectedRow = Bindings.createBooleanBinding(() ->
                      selectedRowIndexes.contains(new Integer(row.getIndex())), row.indexProperty(), selectedRowIndexes);
              selectedRow.addListener((observable, oldValue, newValue) ->
                  row.pseudoClassStateChanged(selectedRowPseudoClass, newValue)
              );
              return row ;
          });
  
          TableColumn firstNameCol = new TableColumn<>("First Name");
          firstNameCol.setMinWidth(100);
          firstNameCol.setCellValueFactory(new PropertyValueFactory<>("firstName"));
  
          TableColumn lastNameCol = new TableColumn<>("Last Name");
          lastNameCol.setMinWidth(100);
          lastNameCol.setCellValueFactory(new PropertyValueFactory<>("lastName"));
  
          TableColumn emailCol = new TableColumn<>("Email");
          emailCol.setMinWidth(200);
          emailCol.setCellValueFactory(new PropertyValueFactory<>("email"));
  
          table.setItems(data);
          table.getColumns().addAll(firstNameCol, lastNameCol, emailCol);
  
          final VBox vbox = new VBox();
          vbox.setSpacing(5);
          vbox.setPadding(new Insets(10, 0, 0, 10));
          vbox.getChildren().addAll(label, table);
  
          ((Group) scene.getRoot()).getChildren().addAll(vbox);
  
          stage.setScene(scene);
          stage.show();
      }
  
      public static class Person {
  
          private final StringProperty firstName;
          private final StringProperty lastName;
          private final StringProperty email;
  
          private Person(String fName, String lName, String email) {
              this.firstName = new SimpleStringProperty(fName);
              this.lastName = new SimpleStringProperty(lName);
              this.email = new SimpleStringProperty(email);
          }
  
          public String getFirstName() {
              return firstName.get();
          }
  
          public void setFirstName(String fName) {
              firstName.set(fName);
          }
  
          public StringProperty firstNameProperty() {
              return firstName ;
          }
  
          public String getLastName() {
              return lastName.get();
          }
  
          public void setLastName(String fName) {
              lastName.set(fName);
          }
  
          public StringProperty lastNameProperty() {
              return lastName ;
          }
  
          public String getEmail() {
              return email.get();
          }
  
          public void setEmail(String fName) {
              email.set(fName);
          }
  
          public StringProperty emailProperty() {
              return email ;
          }
      }
  }
  

  And then the selected line - table.css:

  .table-line-cell: {selected row

  -fx-background-color: lightskyblue;

  }