How to change the permission in drive c to change? lost full control access?

Similar Questions

• How to use the SDLT tape drive in the guest OS VM

  Dear

  now, I have HP DL380 G5 Server running windows 2003 Ent. with bus adapter host SC11xe PCI - E HP which directly connected tp SDLT Tape Drive as backup server and use for the backup operation.

  I want to move the physical backup to host vmware server and EMC AX4 allows you to have a backup online and allows you to take backup offline, SDLT tape drive

  My question is how I use the SDLT tape drive in guest OS vm and vmware knows "HP PCI - E SC11xe Host bus adapter" or not.

  Please let me know how to do this.

  Kind regards

  Mahdi Bellavia

  I have a G5 DL385 (AMD of the DL380 version) with a DLT3.   I use an Adaptec 29320LPE, appearing on the compatibility list.  We plugged a HP Ultrium 920 changer using the 'old method' SCSI passthrough.  We bought the Adaptec card, because we used initially ESX3.5.  We are now on ESX4.0, but for various reasons, the configuration left the same, so I have not tried with VMDirectPath I don't know if it is possible to use the SC11ex card, but if you arrive VMDirectPath at work, it seems then you need another SCSI card.

• How to remove the permission of pc

  How to remove the permission of pc

  On the latest version of iTunes: account > permissions > Deauthorise This Computer (store > Deauthorise computer on older iTunes) on this computer: Deauthorize your computer using iTunes - Apple Support

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• How reset you the app to drive zero when you have completed a workout?

  How reset you the app to drive zero when you have completed a workout?

  Hi Larry

  When you are ready to complete your workout, press firmly on the view > press end > turn the digital Crown to scroll the summary results > at the bottom of the summary, touch save or delete.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• ESXI how to install the network adapter driver

  Hi all:

  My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

  Thank you very much

  Hello

  Follow the VMware KB for the installation of the NIC driver, hope it helps.

  VMware KB: Cards not detected on a host ESX ESXi network

• How to force the old games in a window instead of full screen__

  How to force the old games in a window instead of full screen
  to lighten my load of vid card and switch between windows without minimize
  This is for vista

  Some games have a function of window mode and others are not.

  as:

  If you put at the end of the section 'target' shortcut in the Sims 2, the command w as follows:

  | "X:\programs\games\sims 2\bin\Sims2.exe" w |

  The Sims 2 will run in windowed mode those that run you it!

  but not all games have the option!

  then go to Google and look for some info there ;)

• Anyone know how to solve the problem, when he says scratch disk is full?

  Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/

  Go to Edition > purge > all

  This will clear all of your history and Clipboard, thus freeing the scratch disk space.

• Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

  Hello

  the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
  The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
  risk to get damaged?

  I would be very grateful for each tip and all the help guys can give me!

  Best regards
  a.z.

  Hello

  In various cases the ODD replacement is very delicate.

  If you wish, you can consult this forum category.
  Here you will find some videos how to replace the ODD on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

  This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
  http://www.YouTube.com/user/toshibaeuropesupport

  But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
  But make sure that this!

• How to: reactivate the CD-ROM drive

  Original title: my CD drive has been disabled... have no discount... How do I re - activate?

  My disk drive/cd and dvd rom does not somehow they disabled how to re - enable them without having to buy a new driver

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• How to set the default boot drive? I can get to about 8 choices but only one is correct and I don't know how to do that by default.

  I hit F10 and get a choice. The default value is a flash drive with no boot of the stuff.  How do I pick up and save the right choice that the computer always looking to when it is turned on.

  Hi Herbertrosenthal,

  Welcome to the Microsoft community where you can find the answers related to windows.

  If you get multiple entries start during the connection to the Windows 7 operating system then I suggest you to refer to the following methods.

  This problem can occur because interties incorrect startup, that I suggest to read the following steps and check if it helps.

  a. log in the computer using an account with administrator rights.

  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  c. Select the Startup tab. in the list of boot tab, select the one you want to set a default value.

  d. click on apply, OK and then click on restart and check if it helps.

  Note: If you want to change the boot drive settings then I suggest you to read the following steps:

  a. new computers often display a startup (or boot) menu. In the start menu, choose "Configuration of the BIOS," or "BIOS settings," or something similar.

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DELETE, ESC) or a key combination whenever you turn on your computer but before Windows starts. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer again.

  b. the BIOS configuration screen appears. On the BIOS Setup screen, choose the option called "Boot order" or something similar. Startup command parameters may also be listed under "Advanced settings" or something similar.

  c. Select your drive from DVD or USB drive as first boot device. (The USB flash drive can be listed under "Removable devices" or other similar term).

  d. save the setting changes, and then exit the BIOS.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How to use the 2nd hard drive internal for storage?

  Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

  Thank you!

  

  

  

  That shows disk utility?

• Satellite Pro P70 - Has: 2nd invisible HARD drive - how to initialize the 2nd HARD drive

  I have a P70 - A. Satellite Pro
  'Primary' hard disk failed, and has been replaced by the service centre.

  Now, only the main hard drive is shown and the Service Center said that I had to 'initialize' the second hard drive to make it visible. They assure me that the hard drive is there, just hidden.

  How can I make visible?
  How do I initialize it?

  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them