How to change the report batch header text in the report dynamically?

Hello, everyone. Now I use teststand to measure a voltage test point.there value are a PIN in the control circuit of this values.now I want to change the report batch header text in the example of report.for, I use only one step in a sequence file and can use an expression to change the PIN value.now I want to change the header text batch report through the movement of the expression.i is not found of teststand help document.how I do?

Thank you ~.

my email is [email protected].

In addition, I'm sorry to tell you that my English is poor.if you have any questions, just tell me as soon as POSSIBLE.

I'm looking forward to your reply ~ ~ ~

Hi sar818,

This article points to the name of the step, you can modify with the TestStand API:

Step.Name = "newStepName".

You can call it is the expression of position of the step:

Note that this change will only continue during execution.

Tags: NI Software

Similar Questions

  • How to change the JNDI dynamically in the adaptor DB and adapter FTP

    Hello world

    Please someone explain ' how to change JNDI dynamically in the adapter adapter FTP and DB ' with screenshots


    Thanks in advance

    YES, very possible. Only with the CRUD on a table is possible.
    Please see the below URL, where you can admire the multiple check box enabled under "Perform an operation on a table" depending on the Type of operation.

    http://docs.Oracle.com/CD/E23943_01/integration.1111/e10231/adptr_db.htm#BDCGADFJ

    (* 7) give points - this is the right label to reward an answering machine (5 - useful; 10 - correct) points for their position if they meet your concerne.*

    Go on, please raise it as a separate thread. While people will get benefited.

    Thank you
    Vijay

  • How to change the header text in a sensitive presentation of HTML5

    I work in HR 11.0.4.291.

    This is probably a "duh" question, but I can't remember how to change the title text in the header of a sensitive layout. In the layout editor, I see that I can change the title, color and color of hover font, but where you change the actual text?

    Any help will be much appreciated.

    Can also be the title bar?

    See you soon... Rick

  • How to change the areas of region of report in read-only mode?

    How to change the areas of region of report in read-only mode?

    SKUD.

    Add fuction javascript after the page header (or section of function and Javascript variables)

    function disableItems(pRegionStaticId,pDisableFlag) {
      $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
        if( $(this).attr('name').match(/f[0-9][0-9]/) ){
          return $(this);
        }
      }).attr('disabled',pDisableFlag);
    }
    

    pRegionStaticId is static Id + the region

    Note that this code specifically disables only the berries of request. Disabled items are not available after the submission (and are therefore different from readonly). But any javascript page can change disabled or readonly points (client side), so you need to check on the side server to validate the data.

    You can disable items to help

    disableItems ("MY_REGION_ID", true);

    and allow them, by passing false

    disableItems ("MY_REGION_ID", false);

  • How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

    How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

    Hello

    Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

    If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

    See you soon... Rick

    Useful and practical links

  • How to change the text size in the menu drop down labels?

    How to change the size of text in the label drop-down list box?

    Extension of theme font & size changer.

    https://addons.Mozilla.org/en-us/Firefox/addon/theme-font-size-changer/

  • How to change the text in the paint once I clicked outside of the text box?

    How to change the text in the paint once I clicked outside of the text box?

    How to change the text in the paint once I clicked outside of the text box?

    ====================================
    I guess you could go to... Change / Cancel... then again...

    FWIW... the free Picasa software has tools to add text to photos.

    Picasa
    http://Picasa.Google.com/

    How to add text to your Photos using
    Google Picasa 3
    http://www.ehow.com/how_4599330_text-photos-using-Googles-Picasa.html John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • I don't know how to change the size and quality of the text on the screen on Windows 7

    I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

    I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

    Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

    Thank you all once again!   Best regards, Blondie blue.

  • How to change the color of the text in a form?

    I hae a standard Muse contact form in my site, and I don't see how to change the color of the text in the form labels and the text that is in a field before seizure is produced, but how do change you the color of the text that is entered in a field by a user?

    Hello kevinb,.

    The solution in this thread provided by Connor - change the attributes of text on turnover of muse , that's what you have to do.

    Let me know if you need additional information.

    Kind regards

    Ankush

  • How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

    How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

    These page numbers were initially created using Acrobat PDF header and footer.

    I have a 750 page pdf document that I've created.

    I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

    But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

    I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

    So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

    A way to remove these page numbers already there and add new page numbers.

    Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

    My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

    If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

    Thank you for your review and response.

    You should be able to update with tools - Pages - header & foot-

    Update... It not work for you?

    If this isn't the case, then try to remove from this menu and then re - adding them.

    Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

  • How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

    How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

    OK, Bob. This give a try.

    First, open a new file and make sure the background is white, not on Transparent that I suspect you have currently defined.

    Then, type your copy. Your layers panel will then look like the top of this picture...:

    and when you drag the text on the image layer, it will look like the lower part of the sample above.

    You can then position the text layer with the tool move

  • Dreamweaver CC: How to change the color of the selected text

    Maybe a stupid question, but I can't seem to figure it out, even with searches on the web.  I want to change the color of a single word in my HTML document.  Can anyone offer advice?

    I can change some styles of the selected text (bold, italic, etc.), but do not understand the color.

    Also, I know how to change the color of the different elements using CSS.  But for the selected text in an element, CSS here the simplest solution?

    Thanks in advance.

    carlg79335635 wrote:

    Thank you for that.  But I don't have a color option in my menu format.  It ends at some CSS Styles.  I have to allow him anywhere?  I use Dreamweaver CC.

    Yes.  I checked it and in CC DW, there is not a way to do as I suggested previously.  I was watching DW CS6 and he got it.

    Looks like you'll need to teach how them to manually code.  This will make them think about what they are doing and so concentrate better.

  • How to change the text after the script to the Calendar Wizard creates a calendar

    I mainly work with Photoshop, so I am new to the world of InDesign.  I put my options for the Calendar Wizard script, it goes through the motions, making the calendar and then shows my finished product.  The problem is that it lists the year alongside each month: may 2012 June 2012, etc, and I need to remove '2012' of each of them.  I know that the font styles updates the entire calendar when they are applied, so I hope that it works in a similar way.  I guess it is a very simple task if you are familiar with the program, haha!

    Thanks in advance for any help!

    It sounds more like you ask how to delete 2012 of several pages, and not how to change the script to not put 2012 in all first. If I'm wrong about this, you may want to ask on the Forum script.

    An easy way to remove 2012 is to use find/replace. If you are looking for 2012 and do not fill the field exchange, she will replace 2012 with nothing. In the Find/Replace window, there is a field that will allow you to search for the location of the cursor to the end of the current history, the history, the stories in the document or all open documents. If you set it to the Document, you can use the search button to find the first instance, and if you want to remove it, you can hit replace them, replace/find (what will change and find the next instance), or change everything. I would replace/find, in case you have 2012 on another part of the calendar that you want to keep. You can also have it search the text only when it has a particular paragraph or a character style and put in place the same or a different paragraph or character style. To do this, click in the boxes of Format change or find. To clear out them, hit the small icon of the Recycle Bin next to the field.

  • How to change the text design AS3 using the class Date

    Hi I tried to create a 24-hour countdown on 24 who will make a loop and play back counting it self down to 00:00:00:00

    Thanks to Andrei1 for providing me with this code to create the next animtion:

    var result: String = "";
    var date: Date = new Date (null, null, null, 0, 0, 0, 24);

    var timeDisplay:TextField = new TextField();
    timeDisplay.autoSize = TextFieldAutoSize.LEFT;
    timeDisplay.multiline = timeDisplay.wordWrap = false;
    timeDisplay.border = true;
    timeDisplay.x = timeDisplay.y = 20;
    timeDisplay.text = "00:00:00 ';

    addChild (timeDisplay);

    var: timer = new Timer (250);
    timer.addEventListener (TimerEvent.TIMER, count);
    Timer.Start ();

    function countDown(e:TimerEvent):void {}
    Date = new Date (date.setTime (date.getTime () - timer.delay));
    result = date.toTimeString () replace (/ \s+GMT\-\d + /, "");
    timeDisplay.text = result;
    }

    The end result, I'm looking for is to display this countdown clock in a clear gray arial font as shown in the picture below link:

    http://img801.imageshack.us/img801/3604/picture1ms.PNG

    Right now the code I received leaves me with a box around the type and a GMT (+ 000):

    http://img534.imageshack.us/img534/4264/picture2ot.PNG

    I was wandering if any body knows how to change the design of something in the photo above simular.

    Thank you for your help in advance.

    Tom

    Snippets of code is one thing, but nothing is gained back together solutions to people without explanation (but maybe a smile to not have to struggle with it).  Learning is not easy and it is better that it isn't... it involves the effort, stadiums, an increase in capacity to win.  You presented an entirely different approach to a solution that involves techniques beyond a beginning level.

    Don't you think that tom understands what he has in his hands?  It can develop its own regular expressions or manipulate a Date object to what you gave to him?  More importantly, since he never solved the intitial design of yesterdays issues poster, which has involved basic concepts much more, don't you think he could solve this design now?  Or he missed on some basic things that must precede the techniques that you have provided learning?

  • How to change the text color in CS4

    Hey everybody. I know I'm not comfortable in Dreamweaver, but had DW8 before moving to CS4 and I'm pretty handy with it. In version 8, if I wanted to change a text color, I simply highlighted text and choose a color. No worries.

    However in CS4, I seem to be only have this ability in my CSS, (not the HTML properties) properties. Then, when I try to change the color, it gives me a dialog box asking questions such as 'new CSS', 'for this page only", etc. and I don't understand what I'm supposed to do.

    Can someone tell me in a friendly way (step by step) how to change just one color of text on a page? I went to help and he said to use the color picker, but brings back me to my original problem.

    I'm either something terribly wrong or ADOBE did a simple task in the brain surgery!

    Thanks in advance for the help!

    Mark

    Use an external stylesheet for wide site styles.

    Use CSS for specific styles of the page code.

    Let your only SpryMenu.css.

    Related link.

    Link external style sheets to HTML pages in DW:

    http://ALT-Web.com/demos/DW-link-stylesheet.shtml

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB
    http://ALT-Web.blogspot.com

Maybe you are looking for