How to change the startup sound

Similar Questions

• How t change the startup hard disk?

  I upgraded my hard drive to a 500 GB to 2 TB Drive with a hard drive, copy of the program, thinking I could copy my files to the new drive.

  Help. I need to start on my old HDD 500 GB.

  -Donald

  You could add the second hard disk of 500 GB as a slave and copy your files on the hard disk of 2 TB if its startup. If its not bootable, try to load Windows on it and install the 500 GB drive as a slave and copy your files:
  How to add an Extra hard - wikiHow You will probably need to take ownership of files and folders on the drive of 500 GB, before copying them to:
  How to: Make a file/folder in Windows 7

• (Redirected) Reference DELL 17R SE 7720 - how to change the startup disk of 1 TB mechanical mSATA SSD drive

  I installed a 250GB SSD mSATA. I want Windows to run this SSD and not the 1 TB drive. How can I do this?

  Hi rajivthakar,

  Please repost this in the forum of discs to help.

  http://en.community.Dell.com/support-forums/disk-drives/

• Take more time to start after changing Windows startup sound

  I run Windows 7 Pro on a 120 GB SSD and the operating system would usually start within 15 seconds, but me being silly I decided to change the startup sound, so I downloaded a few changer it starts up and changed the startup sound. So I turned off my computer and wanted to see if it would work. The first time, it's just frozed on the Asus BIOS splash screen. So I force off and then tried again, but this time the screen off for a good 10 seconds on a terminal like screen, then in the dark for 10 seconds and then it started. I could wait the extra 20 seconds, but I'd rather not. After that, I thought it was something to do with the imageres file in system32, so I replaced by a non-screwed upward the same problem occurs.

  Someone at - it suggestions on how this could be repaired?

  And please don't insult me in the comments, I don't think that was the thing the smartest thing I could have done.

  Hi Austin

  You must try to undo these changes.

  Uninstall the changer of its start-up and restore the original imageres.dll file.

  You can also view the system restore for a restore point created before these changes.

  FAQ system restore:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Let us know if it works for you.

  Concerning

• How to change the iPhone camera shutter sound 7

  How to change the iPhone camera shutter sound 7?

  Hello

  To adjust the volume of the sound of the camera shutter:

  • Use the settings ringer and alerts:
    • On iPhone 7 and iPhone 7 more, go to: settings > sounds and haptic.
    • (Other models, go to settings > sounds).
  • Or turn mute off / on using the switch on the side of your iPhone's ring/silent.
    • (The mute function is disabled in some countries).

• How to change the highlight color, click the button image and text and sound.  are there packages of buttons for use in my project?

  How to change the highlight color, click the button image and text and sound. are there packages of buttons for use in my project?

  Hello

  Even if the point of things based Web links buttons created using them is of simple images. Captivate uses simple images. If you need to put your creative hat and not to let the fact that you see the word 'web' scared you somehow. An image is an image. Use on the web, use Captivate. Same case!

  If you change the properties of the button, you can activate the legend of success. Fix any sound that you like with the legend of success and it will play when you click the button. If you do not want to see the legend of success, delete the text and configure it as transparent.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How can I change the alarm sounds?

  The default sound is so annoying in the morning. Is there a way to change the sound of the alarm? I watched a few videos on the sound of the alarm of the Apple Watch on youtube and they had the best sounds. I guess Apple has changed with WOS 2

  Hello

  I fear that it is not currently possible to change the alarm sound on Apple Watch.

  If you want to suggest that Apple considers adding this as a new feature, you can do it here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

• can someone tell me how to change the quality of the sound on my laptop Toshiba Windows 8? Thank you

  Can someone tell me how to change the quality instllation on my laptop Toshiba Windows 8?  Thank you

  I would say more in the direction of http://forums.toshiba.com/ and asking your question related to Toshiba.

• How to disable windows startup sound

  I want to disable the sound my laptop lenovo makes when it turns on. It is really strong and unpleasant in class.

  Hello

  Control tab of control panel - sounds - sounds

  You can change the entire sound scheme or use highlight a sound, and then go to change
  one at a time.

  How-to: change the Windows Vista startup sound
  http://NeoSmart.net/blog/2007/how-to-changing-the-Windows-Vista-startup-sound/

  Pimp my Windows Vista: how to change your sound scheme
  http://www.vista4beginners.com/how-to-change-your-sound-scheme

  How to change Windows Vista (and Windows 7) appears.
  http://www.WinVistaClub.com/F29.html

  Change system sounds
  http://www.Microsoft.com/enable/training/windowsvista/sounds.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to change the boot sequence?

  How can I change the sequenze boot, if it is not possible to open the boot with 'F12 menu '?

  I m wondering why you can't access the start menu?
  What laptop and how Windows system you have?

  Usually, you can change the startup mode in the BIOS settings. To access the BIOS you have to press the F2 key
  But you can also press a particular button while you turn on/off the device to boot from a single module.

  For example:
  C button-> CD/DVD drive
  Key U-> USB FDD
  N key-> internal LAN

  More details here:
  http://support.Toshiba.com/support/viewContentDetail?soID=403623

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the programs that load when Windows starts

  In simple terms... How to change the programs that load when Windows starts?  Because my boot time is slow in arriving at my login screen!

  Download and run the "Autoruns" from Microsoft Sysinternals freeware:

  < http://technet.microsoft.com/en-us/sysinternals/bb963902="">

  It lists all programs that start at startup and allows you to disable it by simply removing a check mark.  This makes it easy to reverse in case something goes wrong.

  HTH,
  JW

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to change the product ID of Windows 7, when you put the disc in the other PC

  I PC_1 with an SSD and a valid license of Windows 7 OEM (HP).  I want to put this SSD in a new, more powerful PC_2.  PC_2 holds a valid license of Windows 7 OEM (Packard Bell).

  My thoughts are:

  1 use Double driver to make a backup of all the PC_2 drivers.  Use ABR Activation Backup and Restore to save the certificate key and activation license for W7 on PC_2

  2 put the SSD in PC_2 and change the license key and activation of the certificate (it has the PC_1 keys/certificates) to the PC_2 keys/certificates

  3. install missing drivers to disk backup Double.

  The problem is How to change the key/certificate in step 2?

  Of course I could rebuild W7 on the SSD and give him the key to license PC_2 for the reconstruction, but that would mean reinstall all my other programs that I prefer not to do so.  I downloaded and still have, a copy of W7 iso website digitalrivers if this can help.

  Thank you

  Put the SSD from PC 1, PC 2 and startup, update drivers, and change it to the product key located on the certificate of authenticity.

  As long as they are running the same edition should not be a problem.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity