How to check multiple occurrences of a running program?

Similar Questions

• How to check what Qt application is run for the first time?

  How to check what Qt application is run for the first time? I need for the creation of trial version of my application. Any help is greatly appreciated

  Probably use file data and put an I_ran_at_least_one_time file and verify its existence. This file is not accessible to the user and is not changed even if you upgrade the application.

• How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Hello

  How to check the MSDS 13.2 running MSD Agent (legacy mode) or TMS provisioning or extension of TMS provisioning services.

  Kind regards

  Siva

  My TMS is strictly using Extension of Provisioning, because I am running 14.3.2 TMSPE is the only option for me, so I can't provide a screenshot.

  However check you by going to: administrative tools > Configuration > General settings, look for the commissioning Mode.

  That said, I suggest that you consider migrating to TMSPE if you have not already, that the recent version of TMS have removed TMS Agent legacy mode.  If you want to use the latest versions of TMS and take advantage of the features it provides, you will need to perform the migration, if not already done.

• How to check if an application is running

  I have a PL/SQL package that runs some program units (does updates and insertions), in a loop.
  
  In the package, before I enter the loop, I want to see if this process is being run by someone else. If this is the case, I want to interrupt my treatment.
  
  Is there a way to do this from the package?
  
  Thank you

  781424 wrote:

  I have a PL/SQL package that runs some program units (does updates and insertions), in a loop.
  In the package, before I enter the loop, I want to see if this process is being run by someone else. If this is the case, I want to interrupt my treatment.

  Is there a way to do this from the package?

  The start-up of this treatment procedure, it needs access to a kind of serialized resource and if the resource is available, keep it locked for the duration of the process. If the resource is already locked, then another copy of this process is already running.

  This can be done using the DBMS_LOCK. A basic example of this operation is posted in {message identifier: = 9388540}.

• How to check multiple values with another column?

  Hi all

  create table xxc_abc (col1 , dept_id number number);

  create the table xxc_bbb (col2 number,sa_dept_id number);

  insert into xxc_abc values (1,10)

  insert into xxc_abc values (2,11)

  insert into xxc_abc values (3,12)

  insert into xxc_bbb values (20.10)

  insert into xxc_bbb values (20,11)

  insert into xxc_bbb values (20,12)

  SELCT

  xxc_abc a.,

  xxc_bbb b

  where a.dept_id = b.sa_dept_id

  Expected results

  a.Col1 b.col2

  ---------  --------

  1 20

  2 20

  3 20

  I need to get several values a.col1 with the same value of the b.col2 column

  a.Col1 b.col2

  ------- ------

  1 20

  2 20

  3 20

  Thank you

  Post edited by: Rajesh123 added Test cases in the main Thread

  Select the number you want to
  

  
  

  with

  xxc_abc as

  (select 1 col1, 10 dept_id in union double all the)

  Select 2,11 Union double all the

  Select double 3.12

  ),

  xxc_bbb as

  (select col2 20, 10 sa_dept_id union double all the)

  Select 20,11 Union double all the

  Select 20,12 double

  )

  Select col1, col2, cnt_all, cnt_not_null, cnt_unique

  from (select a.col1, b.col2,

  Count (*) on cnt_all (b.col2 partition).

  Count (a.Col1) on cnt_not_null (b.col2 partition),

  Count (distinct a.col1) on cnt_unique (b.col2 score)

  xxc_abc a.,

  xxc_bbb b

  where a.dept_id = b.sa_dept_id

  )

  where least (cnt_all, cnt_not_null, cnt_unique) > 1

  order by col1

  COL1	COL2	CNT_ALL	CNT_NOT_NULL	CNT_UNIQUE
  1	20	3	3	3
  2	20	3	3	3
  3	20	3	3	3

  Concerning

  Etbin

• How to remove multiple Firefox beta 4 under Program Files folders. Just delete? Profile data appear to be under Beta 12 and 8 Beta for example.

  Currently under Firefox 4.0.1.
  under Program Files, there are the following folders:

  Mozilla Firefox
  Mozilla Firefox 4.0 Beta 7
  Mozilla Firefox 4.0 Beta 8
  Mozilla Firefox 4.0 Beta 12

  The first two have only 2 records each (extensions and plugins)
  the other two have a lot of folders, files .dll etc.

  Profile data is stored elsewhere, you can remove the old records of installation of Firefox if you wish.

  For info on Windows 7, profile folders are located here - default C:\Users\ < windows user name > \AppData\Roaming\Mozilla\Firefox\Profiles

• How to determine programmatically if LV is running program or app update mode

  I use LV 8.5 and make some measurements with a USB - DAQ. Since I have a compiled version the code continues to grow. So, I'm looking for a possibility to delay by programming between two outputs. While the tests, output and return to the system of development and as a compiled, exit application LV completely and return to the system (as it does with exit.vi).

  Hello

  Take a look at the image.

• How to check remotely if the process is running or not?

  Is there a way we can check if the process is running or not?

  Thank you

  Afonso

  The following WSDL allows you to check the status of remote process:

  http://servername: 8080/SOAP/services/TaskManagerQueryService? WSDL

  Steps to follow:

  1. with the help of TaskManagerQueryService , you can search your Instance of Process (with some filter settings).

  2 get the ProcessInstanceRow from the result list

  3. check the status of the process of processInstanceStatus property

  Hope that helps!

  Nith

• How to enable multiple audio output on Windows 7? Speaker and headphones play audio different...

  How to enable multiple audio output on Windows 7?  In Vista and XP it did automatically... I'm running Media center and Media player at the same time.  And plugged in a USB headset.  Media Player will automatically play through the headset and Media Center will go to the speakers.

  Why this feature is LEFT?

  Hi jibberz

  Welcome to the Microsoft Answers Forum!

  Unfortunately, several audio output is not a supported feature in Windows 7.  You may, however, check with the manufacturer of material for possible programs for that purpose.

  To work around the problem, try the steps listed in the link below and check: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b1d1acac-1f21-4d23-8d68-98964d67c2c7

  For any comments, you can see the link: https://connect.microsoft.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to check the Dell laptop computer charger is authentic

  Hi.Dell Community

  I want to know how to check the Dell laptop computer charger is authentic? also, I bought the system in India on 30' th December 2015 but its POW watch warranty expires at the beginning?

  Warranty details

  Service	Provider	Start Date	End Date	Days warranty
  Only the the parts warranty	REFERENCE DELL	26/06/2017	26/09/2017	614
  Next business day response	REFERENCE DELL	26/06/2017	26/09/2017	614
  Only the the parts warranty	REFERENCE DELL	26/06/2016	26/06/2017	522
  Next business day response	REFERENCE DELL	26/06/2016	26/06/2017	522
  Parts only warranty (in Service)	REFERENCE DELL	25/06/2015	26/06/2016	157
  In service (3-Business Day)(8x5)	REFERENCE DELL	25/06/2015	26/06/2016	157
  TECHNIQUE STANDARD TELEPHONE SUPPORT	REFERENCE DELL	25/06/2015	26/06/2016	157
  Only the the parts warranty	REFERENCE DELL	25/06/2015	26/06/2016	157
  Next business day response	REFERENCE DELL	25/06/2015	26/06/2016	157

  Hi Hema,

  Thank you for your kind reply.

  I bought the system in a Dell store allowed, but the thing is I'm getting confused on post purchase experience.  The bag pack which the seller gave me apparently local, when I refused to take it, he assured me that I will get a real bag after a few days. I also think that I cheated from windows.

  I will be much obliged if you can read the issue in the context (the conversation with the windows community)-

  My question - what is the use of "slmgr / / ato" command, my system is watch a range error code 0x80072EF7, when I run this command. can be solved?

  response-

  Thank you for visiting Microsoft Community.

  According to the publication of the description and the error code that you get when running ' slmgr / / ato "command, it seems that you have any question in your Windows activation.

  Use of slmgr / / ato command:

  For volume systems, with a KMS host key retail editions or a key to activate Multiple (MAK) installed /atoprompts Windows to attempt activation online. Activate Windows license and product key from the Microsoft server. If you receive error 0x80072EF7 code then I suggest you to try the steps outlined in the article below and see if it helps you to solve the problem.

  My question-

  I can't run these technical stuffs on my computer. I'm scared I might lose the original settings since I'm not familiar with computer terminology. I didn't activate windows, I run the command "slmgr/ato' because of Microsoft technical team asked me to do the same. The reality is that I just bought a new Dell laptop, which came with no reinstalled windows, but dealer told me it communicates me windows 8.1pro as compliment (when I asked him which win. I should use win10 update or win original 8.1). and the cost of windows is not mentioned in the Bill. I was not aware at the time of the purchase that I won't have a preinstalled windows system, because I asked the price for laptop with the desired configuration and win8.1. I never thought that I buy a DOS system. I paid for almost the same price for laptop with "win 8.1pro" brokers in the area compare to preinstalled laptop computer sing.language win8.1. After 2 days, when I realized the question and asked the technical team at Microsoft to see if windows that is installed on my system is authentic or not, and they told me that windows is authentic, after checking with my key.  From there, my doubt starts Can a windows be true, even if the user has no evidence that he has purchased? Is the only information is the product key which certifies the genuine windows? What is the risk if the dealer gives the same key to another customer as a "compliment".

  Once I shared the issue with Microsoft support, they tried to hear me, but I think that they have not properly my concern. However, they asked me to run that command and message showed that windows is already activated. Since then, I thought that it could be someone else can also use the same key, I tried to check this order 4 days after. Since then, this error shows. Now, I want to solve each and every error on windows, I will also be very grateful if you could provide me the only way to learn how to check the real windows.

  response-

  Yes, I agree with you, your concern on the product key. It is true that your computer vendor could give the same product key to the other person as a gift too. If another person uses the same key to activate the OS, then you might get pop up to activate your Windows or other activation errors.

  You can see the article mentioned below to check if your OS is authentic.

  My question-

  Today, I called again to Microsoft helpline years technical support says my concern again. This time they told me that 'the ID of the product' which I use is enabled on other computers, but still found my authentic windows. I wonder, earlier the chat session which is held with the technical support told me that no one can use the same key that I use. If it someone trying to do it won't affect my computer because I am one who is authentic and the first user. I don't understand why are there different versions of the truths in the company for the same problem?

  I feel very sad that the company like Microsoft is not able to do something for their customers like me who are less sophisticated techno and want to become authentic windows user! Now, I think there must be a link any between the 'error', I've mentioned above and even the activation key on a different system.  I'm afraid how it would affect my system if other systems get activated by the same key. I don't know what are the services that I won't be able to enjoy if my windows become ingenuine later. Kindly guide me how to raise my complain about best way (with respect to the argument) to the dealer or authority be it is.

  response-

  If you have a valid key, then you will be able to turn it on again. If you call our support team then they will check into his tool and validate it, after doing this they will validate your key and help by activating the latter, if it turns out anyway.

  Keep us.

• How to check my backup drive?

  I'm used to be able to check my backup of disk utility disk. I now use El Capitan 10.11.1 on an iMac and can't find this option. When I try to run first aid on the backup drive, she fails. Can someone tell me how to check the disk please, thank you

  Not how? are you clicking on the partition when you run first aid?

  FWIW, first aid is equivalent to check and repair disk.

• How can I print my Microsoft Surface running Windows 8 RT?

  How can I print my Microsoft Surface running Windows 8 RT?

  Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem.  Everything you need to make these printers is tell them to print and they will.  Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working.  There are different requirements depending on how the printer is connected to the Surface.

  Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all inkjet printers.  If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below).  If none of the drivers work, your printer does not work with the Surface.

  For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface.  It is simply what you have to type more easy to type.  You will also need to have the Surface and the printer connected to the same network.

  1. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  2. Press search.
  3. Under the search box, tap Settings.
  4. In the search box, type devices and printers.
  5. Press devices and printers.
  6. Contact add a printer.
  7. Tap "my printer is not listed.
  8. Select the TCP/IP option and then press Next.
  9. Enter the IP address of the printer and press Next.  Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
  10. The Surface will locate the printer and try to install it.  Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  11. Press 'I want to choose from a list of drivers.
  12. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  13. Choose HP in the production list.
  14. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.) )
  15. Press Next.
  16. Tap Finish.
  17. Test print.

  For USB connected printers, need you a USB cable to connect the printer to the computer.

  1. Connect the printer to the computer via USB.
  2. Windows will try to find the drivers but will not be able to.
  3. Here Windows may ask you if you want to choose the driver to install.  If she go to step 14 below.
  4. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  5. Press search.
  6. Under the search box, tap Settings.
  7. In the search box, type Device Manager.
  8. Press Device Manager.
  9. Tap view and select Show Hidden.
  10. Search for the printer in Device Manager.  It should be in the other devices section with a yellow warning next to her sign.
  11. Select the printer in the list.
  12. Press Action.
  13. Update driver to touch or to install any what it displays.
  14. The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  15. Press 'I want to choose from a list of drivers.
  16. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  17. Choose HP in the production list.
  18. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.)  )
  19. Press Next.
  20. Tap Finish.
  21. Test print.

  I hope this helps.

• How to scan multiple pages into a single document

  I use XP SP3 on the HP 510 laptop and printer HP Photosmart 7510e. How to scan multiple pages in 1 document? PDF is also only available document format?

  Thanks for the tips

  Hello
  
  Please perform the below mentioned steps that should solve the problem.

  Click the icon of the printer (on the desktop), select the scanned under the side of right, notice in the window of advanced settings under file type is a checkbox called "creating a separate file for each scanned page. Make sure it is not checked.

  Kind regards
  Jabzi
  
  Give Kudos to say 'Thank you' by clicking on the White Star under my name.
  
  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• Satellite A200 - how to check the temperature of the processor fan?

  Hi all

  I have a Satellite A200 that my teenagers use a little, or abuse a little! Recently, it would not start up. I suspect the fan and pulled out the fan cleaned and tested the fan on a PSU, worked out well. He put it back together, ran startup repair and now the computer is operating normally. The fan is however not appear to come at all. In the Device Manager it tells me it works very well. I'm all good with the mechanical side of the House, but I'm a quamby operating system! How to check the temp CPU or fan?

  Thought that replace the fan but don't want to go that far just to get no results. Currently using the vacuum on low like an external fan and didn't want to just run the laptop with no cooling for fear of permanent damage. Although children watch movies with her on their doona may have already reached this!

  Any advice would be appreciated.

  Hey mate,

  How to clean the fan exactly? It s advisable to use the jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

  In addition if the fan doesn't work anymore it of necessary to replace. You can order spare parts at an authorized service provider.

• How to check if a user event is registered before you destroy?

  I have a number of screws running asynchronously each registrant to manage a common user event. During the shutdown, each of these screws is unregistered for this event. Now I want to destroy the event.

  Or reference material on user events recommends I wait that all event handlers are registered before destroying the event, and I would like to do this way, even though the waiting may not be necessary in a situation of judgment (suggested in another thread of discussion).

  So my question is: how to check if a user event is canceled completely before I have destroy it?

  In other words: is there a way to see the event handlers registered how a given user event has? I am currently using this VI (see below) to track the number of registered event handlers:

  

  (let's call it with + 1 when you register a handler,-1 when the cancellation of registration). However, it feels like a hack, and I wonder if there isn't a more appropriate way to do so. Ideally, a sort of built-in? This looks like something that LabVIEW would need to keep track of...

  Thanks in advance,

  -Kevin

  Kevin,

  I looked through a documentation to verify whether or not a VI as it exists and unforunately library VI does not contain a means for the user to track the number of events. If we had a VI in the library with the functionality you're looking for it would probably work very similar to your under the hood.

  -Nick-