How to choose between a linear and logistic model in the regression of the glm?

Hello

documentation, I learned that the algorithm of glm for the linear regression model supports linear and logistic regression. However, I can't find any switch or parameter that selects one or the other. How can I tell ODM what kind of regression I want?

Thanks in advance!

Hi Bernd,

Here are some additional tips.

Hope this is what you are looking for.

THX, mark

If you specify a classification, it is logistics. If you specify the regression, linear regression. Logistic regression only we offer is the variance and binary logistic regression canonical link. If you have a target with values in [0,..., 100] and you want to use logistic regression of glm, and then create a view that selects a share point, for example, 50. There is no parameter variation algorithm.

Create view bin_v as

to select which target< 50="" then="" 0="" else="" 1="" end="">

var1, var2,... varn my_data.

Otherwise if you want linear regression, specify regression and let the data it is.

Tags: Business Intelligence

Similar Questions

  • How to switch between 0 v and 5 v using the FTDI USB-to-TTL converter?

    I have one of these (TTL-232R-5V-WE) FTDI (http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm) and it came with a few screws to control the USB converter.

    However, I do not know how to exit (between Vcc and Gnd) 5V to 0V.

    Basically, what I need is alternation since the converter FTDI TTL signal output.

    Any help please? Thank you in advance.

    Hi sclow,

    the link provided, you will find data sheets with all the necessary information. This device implements a COM port that is usual with just TTL level signals. The SCR will always provide + 5V with no opption put. But we can use the CTS/RTS signals! Just look at the description of the node property VISA-> settings-> modem line parameters series...

  • WHERE to choose between 2.4 and 5 GHz on wnr1000v3

    Hello

    I'm trying to find:

    WHERE to choose between 2.4 and 5 GHz on a wnr1000v3...?

    There same 5 GHz option...?

    Thank you!

    Nope. It is only 2.4 GHz.

  • How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

    How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

    Have you checked the settings > General > accessibility > greyscale > power off.

    If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

  • How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

    online media, absent on the media library

    How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

    Check the settings of language and the region under the Control Panel, make sure that it is there.

    You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

    Make sure that during this firewall or IPSec is does not interfere with the download.

    If the above does not help then run Setup again.

    [Tasks > settings > General > installation Windows Media Center > rerun him.]

    Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

    S.Sengupta Media Center MVP

  • How to choose a print with black ink only on the Office Jet Pro 8600?

    How to choose a print with black ink only on the Office Jet Pro 8600?

    Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.

  • How to delete a single text and add text to the image in photoshop cc?

    How to delete a single text and add text to the image in photoshop cc?

    Please try again by following the link: How to remove the text from the Image in Photoshop - YouTube

  • How to choose between the hours in the field Date IR with the functionality of the search bar?

    Hello

    I have an IR with a Date field (point) and when you use the features of the default IR search bar, it is possible to search for dates between 2 dates (date time), but I can't find a way to be able to allow the user to search between the hours of the date (s). I am interested in using the operator betwenn as I would like to provide to the user the possibility to choose for a period of time in the dates.

    How can I get this feature?

    TIA

    Hello

    Change the Date Format of application at: HH24:MI:SS JJ/MM/AAAA

    Sorry - I actually had this setting in my application (which is not often the case!)

    Andy

  • How to export an edited photo and did not stay the same size?

    In iPhoto, I could choose the resolution of the photos I want to export. In the Photos, I see no way to do it. I tried to export a picture which has been published and it went from 5.7 MB to 1.7 MB. Changes should not have shrunk it as it (percentage terms it should be not less than 3.7 MB). 1.7 MB, I won't be able to use the photo as planned.

    How many more of these deficiencies of boring I'll have to suffer with photos?

    Sorry, but we cannot see you if you actually have to provide us with accurate and complete information

    Firstly, you say that you use Mavericks OS X 10.9.5 and also specify that you use Photos - which is not possible if you need to tell us what software you use - the answers are different for different software and versions

    In the Photos you have exactly the same quality and size export options that you have in iPhotp if you need to share exactly what you do step by step and tell us what changes you made - for example a large harvest could easily reduce the file size of a picture of 60% or more

    Exactly how is that what made you appear the size 'should be '?

    LN

  • Switching between Windows 7 and Windows 10 in the future

    I plan to make the upgrade to windows 10. However, I still want to use windows 7. is this possible?

    You can buy a full version license and a dual-boot.

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-the-latest-Windows-build-with/9695dfc7-1C13-4D8D-B10B-587e78c6ac36

    I have the opportunity to choose another drive or partition where I want the update installed?

    No, it will take you run an earlier version of qualification and start the update of the release candidate.

  • How can I get out_data.width and out_data.height when the management of the user interface?

    Hello!

    I am currently working on a project where I change the projection of a video based on where the user click position and I would get out_data.width and out_data. height in an event DragHandle to change one of my slider.

    These values are always set to 0 and is available in the rendering. Any idea on how to get these values? Or maybe I'm working backwards...

    Thank you!

    AW.

    I guess that you are working on 13.5...

    Since 13.5, the sequence data is not editable between the rendering thread. only

    Since the UI thread changes make to the project and the rendering thread.

    but not the other way around.

    I should have mentioned that before.

    There area has some workarounds I can think.

    1. Add a pointer in the sequence data that are shared between threads.

    (you need to be able to say 'live' recorded with pointer

    the project and points to an invalid address)

    2. store your data in the handful of global_data, which is shared between

    threads. Alas it is also grind between the instances, so you will need to

    to say what recorded little data belongs to which body.

  • How to display /etc/resolv.conf and other files from the remote host to the vMA host ESX4i

    Hi all;

    I'm new at VMAs, I put it in place and adds 5 Server esxi 4 and I can list the fines using vifp lists broadcast and works, very well but my problem is I want to interrogate the remote servers for this vMA host for example I need to check the contents of these files

    cat /etc/resolv.conf

    cat/etc/sysconfig/clock

    tail/var/log/vmkernel

    Discovered the following

    esxcfg-firewall - q and esxcfg-vswif - l

    Can someone please help me on how to run these commands or another way on how to get this information above hosts and ESXi 4. I checked the forum, but I don't see anything similair nature! now, either I'm stupid full because it's as simple as drinking water and so no one asked or I am just lucky to ask the right question, so be it, I appreciate your time and effort

    Thanks in advance

    Esxlinux

    So its worth your time through the vMA documentation to understand how to manage your hosts and it's main use case. The operations that you are trying to accomplish cannot be done using vMA... at least in the way that you are hoping for.

    See my vMA article and some of the getting started guides.

    cat /etc/resolv.conf

    You will want to use esxcfg-dns to list the configured DNS servers

    cat/etc/sysconfig/clock

    This file does not yet exist on ESXi, if you try to set the time on ESXi host, you should use NTP and it is also important to note that single ESXi uses UTC and no other options are available.

    tail/var/log/vmkernel

    If you need to display the host logs, consider using vi logger on vMA OR configure syslog on your host to send to the centralized syslog server

    Regarding the last two commands, they do not apply to an ESXi host and therefore these commands are not available.

    There are certainly differences between ESX and ESXi, understand the differences and orders to ask for certain pieces of information is very important. vMA can help with this, but you must understand the use case of vMA and what tools are at your disposal. The best way to start is to take a look at the documentation, to jump it and try to jump in, will just be confusing.

    Good luck

    =========================================================================

    William Lam

    VMware vExpert 2009,2010

    VMware scripts and resources at: http://www.virtuallyghetto.com/

    Twitter: @lamw

    repository scripts vGhetto

    Introduction to the vMA (tips/tricks)

    Getting started with vSphere SDK for Perl

    VMware Code Central - Scripts/code samples for developers and administrators

    VMware developer community

    If you find this information useful, please give points to "correct" or "useful".

  • need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

    need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

    Hello

    You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

    Reference:
    Install, reinstall, or uninstall Windows
    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    http://support.Microsoft.com/kb/308422
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    http://support.Microsoft.com/kb/320820
    How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
    http://support.Microsoft.com/kb/309340

  • How best configuration connect display server and composer to limit the single point of failure?

    Hi all


    Just had a few quick questions:

    1.) how everyone is to limit the Connectoin Server view to a single point of failure.  All the reading I did looks that everyone puts in place two servers connectoin and doing DNS round robbin on it or put two servers behind a load balancer connection

    (2.) what happens if the mode to connect to the server disconnects while users are connected and actively using desktop computers?

    3.) how to protect View Composer of single point of failure.  It seems that most people are installing this on there vCenter server and everything by leaving it with VMware HA.

    (4.) what happens if View Composer breaks down and you have Active Desktop sessions used by users who are linked clones

    (5.) what is the login used for replication partner server view?  This is a new feature in display 6 that creats a form any cluster to the login server?


    Let me know,


    Thank you

    1. Yes. Need a load balancer. Something better than a round robin DNS since those who go ping (response from the host)-based and not necessarily whether the service is in place (port 80/443 replying with 404)

    2. the user disconnects. When the reconnection that they continue where they left off.

    3. just about everything. Also ensure that regular backups are performed by the login server. Don't forget that if you need to restore, to restore a backup SQL composer both AD LDS.

    4 should be fine. The only problem is during commissioning, a linked clone or create a delete. Then could be a problem. Updating should be ok

    5. a replication partner? Do you mean the replica server? It's just an identifier during the installation as to whether, during the installation of the connection to the server, create you a new instance of the view or expand an existing one. He ends by as a peer to other servers to connect in the same instance (POD).

  • How to install Photoshop elements 14 and first 14 elements the new MacBook? I tried installing content of the DVD to the SD card but the installer says now software is pirated. [was: piracy?]

    Hello...

    many apologies for my bad English :-)

    I bought Photoshop Elements / Premiere Elements to Amazon 2 days. Today, I tried to install it on my new Macbook, there is no unit of DVD, so I copied the files on a SD card and put that in the Mac and began to install. The application process the Adobe ID, I connected and then typed the serial number. He asked for the volume and started installing. After that, he stopped and noticed, that there is an error in the health check for Original software and said: that my product is NOT original. It is due to the copy of the SD card, or is it real hacking? A thinking about it?

    Here the original text:Bildschirmfoto 2015-12-04 um 21.40.33.png

    Thank you for the help...

    JAN

    If you use the installation files, there should be no problem.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

    window using the Lightroom 3 link to see these "important Instructions".

Maybe you are looking for

  • Airport Extreme intermittently lose network signal

    For several days, I repeatedly lose my network signal.  I spent an excessive amount of time troubleshooting including going so far as to have a comcast tech come by today, but it's a bit like going to the doctor... When the doctor walks in the room,

  • Need to restore iPod whenever I sync

    What a f - g pain in the *... since recent iTunes update, need to restore iPod mini every time I sync...-a - h - l - are...

  • Atrix, Bluetooth, 2011 Hyundai Sonata

    I just bought a 2011 Hyundai Sonata SE yesterday. As announced, it had included Bluetooth as a basic characteristic. Whereas it should be quite handy, I have problems with this component contacts by name. Once the device is paired, I am able to speak

  • BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

    Hello world I have the following problem: After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the men

  • ATI Radeon HD 3200

    I have a Hp Pavilion dv7-1260us. It has an integrated ATI radeon hd 3200 graphics card with what is called hypermemory. Now my research online it's a 512 MB graphics card. Although my display properties shows a memory dedicated 256 MB only! I tried g