How to choose Internet Information Services (IIS) in Windows 7 to create and maintain the virtual directory?

Similar Questions

• How to configure Internet Information Services (IIS) in Windows compressed Surface

  Hello

  I bought the new Tablet Surface of Windows running on the operating system Windows RT.

  I want to configure Internet Information Services (IIS) in the device Surface. So I opened "Turn windows feature on or off" in Control Panel. But this isn't the option 'Internet Information Services' list. Is it possible to configure or activate IIS on the Surface features? Please help on this application.

  Thanks in advance.

  Kind regards

  Hari.

  No, IIS hosting services are not in the RT as a consumer device, it is not intended to run IIS, or even other services, and these services are not rebuilt to run on the ARM processor.

  You could do that from the Surface pro, running the full Windows operating system.

• ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue.

  Trying to get SCCM 2007 deployed. However, could not succeed prechecks for Management Point. Even though I have BITs enabled from IIS in Add / Remove components. This does not seem to fix this error. I have re-installed Win2K3 to see if that solves the problem, but no luck. Google search and exhausted. Now need some answers of MS. Pas able to determine the exact reason for the BITs not detected.

  Here it is the errors

  ***********************************************************

  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not installed and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or the Setup program could not verify the remote IIS settings because IIS common components were not installed on the site server computer. ConfigMgr requires BITS installed and enabled in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  (BITS) Background Intelligent Transfer Service is required for the management point and BITS compatible distribution point site system roles. (BITS) Background Intelligent Transfer Service is not configured properly and/or IIS 6 WMI for IIS7 compatibility components is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the computer site server. ConfigMgr requires BITS be installed and active in Internet Information Services (IIS) before Setup can continue. Setup cannot continue.

  ***********************************************************
  and below too although I sent this patch. Cable. :)

  This software update addresses several MMC errors that may occur when you run the Configuration Manager console. This update must be applied if one of the following conditions occur: Configuration Manager console stops responding when the host computer is low on available memory, display errors in context menu on the console home pages, or inconsistent after drag - move fail. More information on this update is available at: http://go.microsoft.com/fwlink/?LinkId=98349.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/configmgrgeneral/threads

• Internet Information Services (IIS) Manager

  Error 404 need to activate the (IIS) Manager

  http://learn.IIS.NET/page.aspx/479/IIS-70-features-and-Vista-editions/

  Read the above.

  http://learn.IIS.NET/page.aspx/28/install-IIS-7-on-Windows-Vista-and-Windows-7/

  You need Vista Business, Ultimate or enterprise to have full IIS 7 on Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• In "internet information services"! which of these need or must be checked ON?

  Original title: programs and features

  There are about 40 sub-features under 'internet information services '!  which of these need or must be checked ON?

  Information Internet Service are disabled by default, and it shouldn't be necessary if you are running a Web Site/Server.

  I think that some programs also require a Web interface, in which case IIS must be installed.

  What parts are needed depend on the program in question, and you would probably get

  an error if a program required these features and that they are not installed.

  -If you check the box next to the title it will automatically activate several basic features

  for HTTP, World Wide Web and security.

  .

• How can I recover my product key of Windows XP? I still have the Original CD.

  How can I recover my product key of Windows XP. I still have the Original CD.

  NKALE,

  It is OEM, sale retail or Volume Licensing? If it is OEM, the tile should be on your CPU. If it's retail, should be on the back of the box. If it's VL, then you should see in https://eopen.microsoft.com.

  Best,

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  Hey Preethi23

  It comes to the installation of vista operating system instance

  read the links below

  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

  http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  Walter, the time zone traveller

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• How to block internet access to program in windows 8

  I don't like some programs to the Internet without my permission.
  How can I do that in windows 8?
  Thank you, vsuboni

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, I understand that you want to block a program to access the Internet.

  To help you better, please answer this question:

  Are you referring to the blocking of the apps for the modern User Interface screen?

  I suggest you follow the steps to solve the problem:

  a. press Windows + X key.

  b. Select Control Panel from the context menu.

  c. Once you are in the Control Panel, select Windows Firewall .

  d. Once completed, locate and choose the option allow a program (an application) or feature through Windows Firewall in the left column of the Windows Firewall window.

  e. Locate and click the change settings button in the allowed programs window.

  f. uncheck the programs or the items in the list, you have finished to access internet.

  g. click on OK.

  Check out the link:

  End-to-end Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

  If you need help with windows, just tell me and we will be happy to help you.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to recover windows files option tool and activate the Task Manager?

  I used windows xp, Service Pack 3... I can't use the tool option records because it is not displayed in the Tools menu and option when I press ctrl + alt + delete, then said the task manager has been disable by your administrator... and my standard buttons search option does not work...

  It's a shame that we know so little on your system, windows xp, Service Pack 3...

  This is because the forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Your system has or has had a malware infection.

  Whatever not specified antivirus/antimalware software or you use requests have failed to protect your system.  Remember to replace or supplement / them.

  I would follow this diet to relieve your symptoms, immediate and then followed with some free and respectable malware scanners.

  Both scanners by operating clean, it would be time to fix any problems.

  Part 1:

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

  Part 2:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Restart and fix any problems.

• Install service pack 3 Windows xp pro takes care of the missing DLLs needed for kernels. the mine antivirus program deleted some critical files

  from the start, windows fails to launch and a message of error due to the missing dll files is displayed

  If Windows does not start, you can not install Service Pack 3. And no, it is unlikely that your computer could get repaired by doing so, even if you were able to try. Try a repair rather installation:

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to remove messages in Exchange 2010 by dates. in a group and exclude the Contacts, record retention and calendar

  How to remove messages in Exchange 2010 by dates.  in a group and exclude the Contacts, record retention and calendar.

  I'm deleting emails from users in a group called MX_Purge file. I need to delete the emails date xx/xx/xxxx to xx/xx/xxxx.

  I also need to exclude the excluded the following records 'calendars' folders 'Contacts' and 'Retention '.

  The server people hang around more in the TechNet forums, if you ask, you will get a much better response:

  http://social.technet.Microsoft.com/forums/en-us/Exchange2010/threads

• Service center security Windows XP (error 1060) and firewall (error 1075) have stopped working. dependencies not installed.

  I have Windows XP Pro SP3 and the Security Center and firewall stopped working. I couldn't restart using various commands in the statutes for help. I keep getting the below error messages. It seems that there is a service or services that I have to install that I'm not aware of...

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  My comment * Security Service does not work

  C:\>cmd/k SC QC WSCSVC

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  My comment * Windows Firewall does not work

  C:\>SC query sharedaccess

  Service_Name: sharedaccess

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  (NOT_STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)

  WIN32_EXIT_CODE: 1075 (0 X 433)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  C:\>net start sharedaccess

  1075 system error has occurred.

  The dependency service does not exist or has been marked for deletion.

  HOWEVER, when I click Start, click network connections: I have no icons to work with on the screen. See my other related post I copied below:

  "" error failed with error 0 x 80070424: the specified service does not exist as an installed sercies: "."

  To restore the missing "Network connections" service, you can use the reg. here:

  http://WindowsXP.MVPs.org/NetMan.htm
  But what cleared it is still a mystery. I would also run an analysis for virus/malware.