How to choose the elements that are copied when using a custom template?
Hello
As the title, how to choose whether or not an element is copied into a new project when the project is created from a custom template?
I recently created a custom template by following these instructions, as had recommended after my last question on the forums:
The template was created so that I can create several versions of a broad program of LabVIEW with unique names (using the prefix in the project options). It works fine except that some things are not copied into the new project, even if they are part of the model. The most important point of "disappeared" is for runtime menu (which is a RTM file). Does anyone know why this might be missing? And how to make sure, it is included in the future?
Thanks for any help.
OK, here is the custom script VI (saved in LabVIEW 2012) and XML update that should fix your test project. You can take a look at how I implemented XML and script VI, then make the changes applicable to your current project.
1. use the attached file to MenuTest.xml for your meta data. Note the new sections CustomVIMode and CustomVIPath .
2 create a folder next to your .lvproj of the source script and place the PostCopyScripting.vi in there.
Once you have done so, your MenuTestProject should be copied on properly... the GTR will be present in the new Bachelor of LAW, it will have a correct prefix (if specified), and it will be the correct link to the VI.
I would like to know if you have any other questions or problems.
Tags: NI Software
Similar Questions
-
How to remove the files that are duplicate or use more?
I had someone me my laptop gift and there are elements, I don't think I'll ever use as Apple store etc. My friend was kind enough to upload my pictures and my videos my sims card phones, but when I look at it is more than once exemplary. I have to remove the duplicates manually? Please say its not then... as well as with my music...
You can go through them and remove duplicates manually, or there are many programs that can check duplicate files and delete them if you have copies.
Here are two free programs:
Auslogics Duplicate File Finder
http://www.Auslogics.com/en/software/duplicate-file-Finder/
Duplicate Cleaner
http://www.digitalvolcano.co.uk/content/duplicate-cleaner -
How to have some default values in all the elements that are empty in the xslt file.
Hello
Need help:
Scenario:
After transformation .xslt, there are certain elements that are mapped but left empty. I want to give him some defaults as '0'. How to do this.
Thank you.you could do this:
http://StackOverflow.com/questions/2791295/setting-default-values-for-empty-nodes
and if you want different default values for some nodes to which you may use local-name and some other default settings listed
-
How to choose the object that others will line up to?
Hi I'm attacking with Illustrator, having been familiar with CorelDRAW X 5, and some of the fundamental things in artificial intelligence are just weird!
A common operation is to have a bunch of stuff I want to align, where I spent the time of positioning on the particular object so I want that everything stays aligned him to this object. I can do it in artificial intelligence?
For example, I have two rectangles A and B, separated horizontally with a greater than B. I want that the upper edge of the B to align to the top edge. I select A, then B and align top. It works - B moves upward.
However if I want albums edge to align the top edge of the B, it does not work how I expect. B always moves. It doesn't matter if I choose first or second, B is the one who moves, when A is above B.
It's frustrating when I have a lot of objects that are carefully aligned, and I want to align a new object with them. What often happens is that all of my objects placed move to align with the Unplaced object, so I spend a lot of time.
Y at - it a simple way to choose the object that others in the choice of align on? In CorelDraw, it's the last selected object that determines how many others will be moved.
Thank you
Rob
Select all the objects you want to align, and then click again on the object of the selection you want that all the others will match (object key).
the key of the object will appear thicker than others.
-
How to remove the files that are most referenced in the catalogue
Over the years, we have a number of files (raw files ~ 650) who withdrew from the catalog but not my hard drive. This happens mainly because I used the wrong combination. But now I am stuck how can I find and delete these files?
Best strategy so far:
-Use Synchronize folders to search for the missing files from the catalog
-The re-importation of a keyword - deleteme.
I'd really rather avoid this because I really don't want to take the risk of any chance to have these files. Any other ideas?
See you soon
Mark Levison
Mark Levison | Agile Consulting pain relief | Editor @ InfoQ agileRecent entries: Self Inflicted wounds Agile, Why use an Agile CoachIn each of your folders in Lightroom, create a new folder and call it temp. In Lightroom, move the images that are located in the folders to temporary folders. Go to your finder and delete these images that were not moved to the temp folder. (ie. those that Lightroom was not aware of) Move images back in Lightroom, and then delete the temp folder.
Personally, I'd go with import via synchronization of the top-level folder and then delete the images as you watch the "previous import" and get rid of all 650 photos at once. No necessary but useful keyword as a security measure.
-
the triggers that are running when create, Alter, Drop of orders
Hello
I use oracle 10g. I want to create triggers that are running when create, Alter, Drop executed orders .How can I do this...Offcourse.
Let's look at this code
create to replace trigger prevent_drop
before the fall on Practice.schema
Start
If ora_dict_obj_owner = "PRACTICE".
and ora_dict_obj_name like '% BOO '.
and ora_dict_obj_type = 'TABLE '.
then
RAISE_APPLICATION_ERROR)
-20002, 'operation not allowed.');
end if;
end;better compliance
skyniazi -
Good day everyone.
Been working on a fun project for a while now and overtime, I added the audio, images and YouTube videos in my project that later, I decided not to use in the timeline panel. These media (for example, a specific song or image) are always loaded when I load the project and are included in the assets of the project, of course. The reason being, I never deleted from the project.
Now, I probably have about 30 to 40 cases. It is time to clean house and I want to know if there is a command or a way to get the first (ss12) to highlight, gold banner somehow let me know which media, well listed and loaded, is not used in the timeline panel.
Any chance this feature exist?
Best.
Love_Green_Turtles
For your consideration... Try on a new mini test project before using it on a project of 'true '...
Open an active project
Click on the Options tab of Control Panel
In the Panel Options Select display
Select in the List View view
In list view all files that are in the current project and the timeline will have a green dot in the used column.
If you delete a file from the timeline, the green dot next to the involved file will disappear.
You should be able to go through the list of assets/open project view and clear all entries that do not have a green dot next to them.
Another safety net to consider... make a copy of the 'real' project and try the above on the copy.
Please let us know if we have targeted your question and if the works above for you.
Thank you.
RTA
-
How to target the buttons that are nested by 2 levels and one more thing...
OK I'm going. The link below, this is what I deal with
http://clienttestsite.X10.MX/beta/garage.swf
The garage door has a chevrolet logo that is thrilling. I know not how to make buttons but I need the garage door to become a button when you click on the animation plays instead of playing automatically.
The upper part of the chest of the tool will be a button that plays the animation backwards and the drawers are the buttons that open to an e-mail for each form. But I do not know how to target those buttons because they are nested two levels below the main timeline.
In the case where he changes the way to proceed, once completed this film will be imported in another.
Help, please!
Thanks in advance.
As long as the object that you want to make clickable is an object with an instance name (movieclip, button, etc.) you can make it work like a button. If you know how the code for the buttons, then this should be everything you need to know to make the garage door a clickable object.
Target buttons that are nested you can use the point rating to target... Since you did not identify the details of nesting, here's how it goes mainly...
Toolchest.Drawers.drawer1.addEventListener(...etc)
-
No data when querying XML document which does not have all the elements that are populated
Hi people
Following the previous post http://bit.ly/beyCdc forum, I met a new show that I'm looking to solve today.
General information:
The xml document, I try to shred them may exist in 2 forms; b limited form and (b) complex form, which
to comply with the same xmlschema.
The structure of the two forms of the document is:
b limited version
(1) under the parent node (of BASANTA) is a child node - RTDRFileHeader
(2) also under the parent node is a node of complex "ConnectionList. This can consist of thousands of child nodes 'connection '.
(3) below a given node of "Connection" are child nodes that are of interest, they are:
(b) extended versionConnection/HPMN Connection/VPM Connection/FileItemList/FileItem/FileType/InitTAP/TAPSeqNo Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TAPTxCutoffTmstp Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TAPAvailTmstp Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TAPCurrency Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TotalNetCharge Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TotalTax
The structure of the Extended version is identical to the above limited version but there are elements of additional group under the /chargeInfo. element
It's TrafficBreakdownList and AdditionalChargeInfo. In addition, the TrafficBreakdownList has child nodes that contain elements of the group.
For example.
What I'm trying to achieve, if possible, is to have a SQL statement that can interrogate the two versions of the xml document. CurrentlyConnection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/CallEventType Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/CallEventType/CallEventInfo/NumberOfEvents Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/CallEventType/CallEventInfo/TotNetCharge Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/CallEventType/CallEventInfo/TotTaxValue Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/InvPeriod Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalNetChargeSDR Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalTaxSDR Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/VPMNLocCurr Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalNetChargeVLCSR Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalNetChargeVLCCD Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalTaxVLCCD Connection/FileItemList/FileItem/FileType/InitTAP/ChargeInfo/TrafficBreakdownList/TrafficBreakdownItem/AdditionalChargeInfo/TotalTaxVLCCD
the following SQL statement works properly against the extended version XML document, but when used against the limited version he returns no rows.
I guess what I'm after is like a LEFT JOIN XML :-) If the node is not present, returns NULL for this element.
b limited Version of XML
(b) extended version of XML<RTDR> <RTDRFileHeader> <Prefix>MRTDR</Prefix> <Sender>EDSCH</Sender> <Recipient>NXTMP</Recipient> <PMN>UKRAS</PMN> <ReportSeqNo>5</ReportSeqNo> <TADIGGenSchemaVersion>2.2</TADIGGenSchemaVersion> <RTDRSchemaVersion>1.1</RTDRSchemaVersion> <CreationTmstp>2009-09-04T04:04:00.000000+02:00</CreationTmstp> </RTDRFileHeader> <ConnectionList> <Connection> <VPMN>UKRAS</VPMN> <HPMN>LIEK9</HPMN> <FileItemList> <FileItem> <FileID>CDUKRASLIEK901274-00005-m</FileID> <ExchTmstp>2009-08-24T12:07:22.000000+02:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>1274</TAPSeqNo> <NotifFileInd>true</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2009-08-24T12:52:10.000000+03:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2009-08-24T11:52:10.000000+02:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDUKRASLIEK901280-00005-m</FileID> <ExchTmstp>2009-08-30T12:14:39.000000+02:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>1280</TAPSeqNo> <NotifFileInd>true</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2009-08-30T12:52:34.000000+03:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2009-08-30T11:52:34.000000+02:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> </ChargeInfo> </InitTAP> </FileType> </FileItem> </FileItemList> </Connection> <Connection> <VPMN>UKRZZ</VPMN> <HPMN>LIEZZ</HPMN> <FileItemList> <FileItem> <FileID>CDUKRZZLIEZZ01274-00005-m</FileID> <ExchTmstp>2009-08-24T12:07:22.000000+02:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>1274</TAPSeqNo> <NotifFileInd>true</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2009-08-24T12:52:10.000000+03:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2009-08-24T11:52:10.000000+02:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDUKRZZLIEZZ01280-00005-m</FileID> <ExchTmstp>2009-08-30T12:14:39.000000+02:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>1280</TAPSeqNo> <NotifFileInd>true</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2009-08-30T12:52:34.000000+03:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2009-08-30T11:52:34.000000+02:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> </ChargeInfo> </InitTAP> </FileType> </FileItem> </FileItemList> </Connection> </ConnectionList> </RTDR> '
It's the query I want to be able to run against the two XML documents. As mentioned, this works very well against the complex XML but no result against the simple XML.<RTDR xmlns:tadig-gen="https://infocentre.gsm.org/TADIG-GEN" xmlns="https://infocentre.gsm.org/TADIG-RTDR"> <RTDRFileHeader> <Prefix>DRTDR</Prefix> <Sender>EDSCH</Sender> <Recipient>NXTMP</Recipient> <PMN>AAAAA</PMN> <ReportSeqNo>1</ReportSeqNo> <TADIGGenSchemaVersion>2.2</TADIGGenSchemaVersion> <RTDRSchemaVersion>1.1</RTDRSchemaVersion> <CreationTmstp>2010-03-17T12:32:37.000000+01:00</CreationTmstp> </RTDRFileHeader> <ConnectionList> <Connection> <VPMN>AAAAA</VPMN> <HPMN>GRCCO</HPMN> <FileItemList> <FileItem> <FileID>CDAAAAAGRCCO04164-00001-d</FileID> <ExchTmstp>2010-03-16T00:30:27.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>4164</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T00:15:25.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T00:15:25.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>48.546</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>CS MO</CallEventType> <CallEventInfo> <NumberOfEvents>7</NumberOfEvents> <TotNetCharge>11.16</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>CS MT</CallEventType> <CallEventInfo> <NumberOfEvents>2</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>GPRS Calls</CallEventType> <CallEventInfo> <NumberOfEvents>26</NumberOfEvents> <TotNetCharge>37.35</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MO</CallEventType> <CallEventInfo> <NumberOfEvents>1</NumberOfEvents> <TotNetCharge>.036</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>3</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>48.546</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>54.687</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>54.216</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDAAAAAGRCCO04165-00001-d</FileID> <ExchTmstp>2010-03-16T09:27:15.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>4165</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T09:15:20.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T09:15:20.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>7.114</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>CS MO</CallEventType> <CallEventInfo> <NumberOfEvents>5</NumberOfEvents> <TotNetCharge>4.985</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>CS MT</CallEventType> <CallEventInfo> <NumberOfEvents>1</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>GPRS Calls</CallEventType> <CallEventInfo> <NumberOfEvents>10</NumberOfEvents> <TotNetCharge>2.057</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MO</CallEventType> <CallEventInfo> <NumberOfEvents>2</NumberOfEvents> <TotNetCharge>.072</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>6</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>7.114</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>8.014</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>7.959</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDAAAAAGRCCO04166-00001-d</FileID> <ExchTmstp>2010-03-16T14:28:43.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>4166</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T14:15:23.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T14:15:23.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>1.638</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>CS MO</CallEventType> <CallEventInfo> <NumberOfEvents>2</NumberOfEvents> <TotNetCharge>1.458</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>CS MT</CallEventType> <CallEventInfo> <NumberOfEvents>7</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MO</CallEventType> <CallEventInfo> <NumberOfEvents>5</NumberOfEvents> <TotNetCharge>.18</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>15</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>1.638</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>1.845</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>1.832</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> </FileItemList> </Connection> <Connection> <VPMN>AAAAA</VPMN> <HPMN>GRCSH</HPMN> <FileItemList> <FileItem> <FileID>CDAAAAAGRCSH03283-00001-d</FileID> <ExchTmstp>2010-03-16T00:30:29.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>3283</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T00:15:25.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T00:15:25.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>1</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>0</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>0</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>0</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDAAAAAGRCSH03284-00001-d</FileID> <ExchTmstp>2010-03-16T09:27:16.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>3284</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T09:15:20.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T09:15:20.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>.072</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>SM-MO</CallEventType> <CallEventInfo> <NumberOfEvents>2</NumberOfEvents> <TotNetCharge>.072</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>2</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>.072</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>.081</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>.081</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> <FileItem> <FileID>CDAAAAAGRCSH03285-00001-d</FileID> <ExchTmstp>2010-03-16T14:28:45.000000+01:00</ExchTmstp> <FileType> <InitTAP> <TAPSeqNo>3285</TAPSeqNo> <NotifFileInd>false</NotifFileInd> <ChargeInfo> <TAPTxCutoffTmstp>2010-03-16T14:15:24.000000+01:00</TAPTxCutoffTmstp> <TAPAvailTmstp>2010-03-16T14:15:24.000000+01:00</TAPAvailTmstp> <TAPCurrency>SDR</TAPCurrency> <TotalNetCharge>0</TotalNetCharge> <TotalTax>0</TotalTax> <TrafficBreakdownList> <TrafficBreakdownItem> <CallEventType>SM-MT</CallEventType> <CallEventInfo> <NumberOfEvents>1</NumberOfEvents> <TotNetCharge>0</TotNetCharge> <TotTaxValue>0</TotTaxValue> </CallEventInfo> </TrafficBreakdownItem> </TrafficBreakdownList> <AdditionalChargeInfo> <InvPeriod>2010-03</InvPeriod> <TotalNetChargeSDR>0</TotalNetChargeSDR> <TotalTaxSDR>0</TotalTaxSDR> <VPMNLocCurr>EUR</VPMNLocCurr> <TotalNetChargeVLCSR>0</TotalNetChargeVLCSR> <TotalTaxVLCSR>0</TotalTaxVLCSR> <TotalNetChargeVLCCD>0</TotalNetChargeVLCCD> <TotalTaxVLCCD>0</TotalTaxVLCCD> </AdditionalChargeInfo> </ChargeInfo> </InitTAP> </FileType> </FileItem> </FileItemList> </Connection> </ConnectionList> </RTDR>’
Thank you very muchSELECT rtd.rtdr_document_id ,rtd.filename ,EXTRACTVALUE(rtd.rtdr , '/RTDR/RTDRFileHeader/PMN' ) client_pmn ,connXML."VPMN" vpmn ,connXML."HPMN" hpmn ,fileXML."TAPSeqNo" tap_seq_no ,chrgXML."TAPTxCutoffTmstp" tap_tx_cut_off_tmstp ,chrgXML."TAPAvailTmstp" tap_avail_tmstp ,chrgXML."TAPCurrency" tap_currency ,chrgXML."TotalNetCharge" total_net_charge ,chrgXML."TotalTax" total_tax ,traffXML."CallEventType" call_event_type ,callEvtXML."NumberOfEvents" number_of_events ,callEvtXML."TotNetCharge" call_event_ttl_net_charge ,callEvtXML."TotTaxValue" call_event_ttl_tax_value FROM t rtd ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/RTDR/ConnectionList/Connection' PASSING rtd.myXML COLUMNS "VPMN" VARCHAR2(5) PATH '/Connection/VPMN' ,"HPMN" VARCHAR2(5) PATH '/Connection/HPMN' ,"FileXML" XMLTYPE PATH '/Connection/FileItemList/FileItem/FileType/InitTAP' ) connXML ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/InitTAP' PASSING connXML."FileXML" COLUMNS "TAPSeqNo" VARCHAR2(50) PATH '/InitTAP/TAPSeqNo' ,"ChargeInfoXML" XMLTYPE PATH '/InitTAP/ChargeInfo' ) fileXML ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/ChargeInfo' PASSING fileXML."ChargeInfoXML" COLUMNS "TAPTxCutoffTmstp" VARCHAR2(30) PATH '/ChargeInfo/TAPTxCutoffTmstp' ,"TAPAvailTmstp" VARCHAR2(30) PATH '/ChargeInfo/TAPAvailTmstp' ,"TAPCurrency" VARCHAR2(30) PATH '/ChargeInfo/TAPCurrency' ,"TotalNetCharge" NUMBER(22,5) PATH '/ChargeInfo/TotalNetCharge' ,"TotalTax" NUMBER(22,5) PATH '/ChargeInfo/TotalTax' ,"TrafficBreakdownListXML" XMLTYPE PATH 'TrafficBreakdownList/TrafficBreakdownItem' ) chrgXML ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/TrafficBreakdownItem' PASSING chrgXML."TrafficBreakdownListXML" COLUMNS "CallEventType" VARCHAR2(20) PATH '/TrafficBreakdownItem/CallEventType' ,"CallEventInfoXML" XMLTYPE PATH '/TrafficBreakdownItem/CallEventInfo' ) traffXML ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/CallEventInfo' PASSING traffXML."CallEventInfoXML" COLUMNS "NumberOfEvents" NUMBER PATH '/CallEventInfo/NumberOfEvents' ,"TotNetCharge" NUMBER PATH '/CallEventInfo/TotNetCharge' ,"TotTaxValue" NUMBER PATH '/CallEventInfo/TotTaxValue' ) callEvtXML
Kind regards
Simon GaddHi Simon,.
I guess what I'm after looks like a LEFT JOIN XML
Exactly.
Try to add a (+) after the last two XMLTABLEs operator:
... ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/TrafficBreakdownItem' PASSING chrgXML."TrafficBreakdownListXML" COLUMNS "CallEventType" VARCHAR2(20) PATH '/TrafficBreakdownItem/CallEventType' ,"CallEventInfoXML" XMLTYPE PATH '/TrafficBreakdownItem/CallEventInfo' ) (+) traffXML ,XMLTABLE( XMLNAMESPACES ( DEFAULT 'https://infocentre.gsm.org/TADIG-RTDR' ), '/CallEventInfo' PASSING traffXML."CallEventInfoXML" COLUMNS "NumberOfEvents" NUMBER PATH '/CallEventInfo/NumberOfEvents' ,"TotNetCharge" NUMBER PATH '/CallEventInfo/TotNetCharge' ,"TotTaxValue" NUMBER PATH '/CallEventInfo/TotTaxValue' ) (+) callEvtXML
HTH.
PS: the declaration of namespaces does not appear in the 'limited' version, perhaps you simply forgotten in your sample? Could you confirm?
-
How can I protect certain areas are copied when using Content Aware Fill in CS6?
I want to remove the paper box and soft bottom. When I use the content aware fill, it copies a few people... How can I protect the people to be copied? Or is there a better way to remove unwanted objects?
To prevent collection of the material, you don't want to, as the picture, one layer and mask just on the stuff that you don't want for you (and filling) do not see Content Aware Fill. It's the easiest way I find to remember.
-Christmas
-
value of the element is not common when used in dynamic action
I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.
When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.
How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?
I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.
dacoellov wrote:
I'm learning the 5 apex and I wanted to create a page that would update the fields in a record by entering the unique id of the recording using a dynamic action with plsql.
When I click on the button update the value of the element of the text uses the previous value and not the input current. The 'works' update, but the ID values are not appropriate.
How can I make sure that when I click on the update button, the dynamic action will get the current value of the text element and not the previous (when the page was submitted)?
I created a quick demo or what I was testing in apex.oracle.com and always gives me the same result.
What dynamic action event and what types of action are involved here? Provide details, or better yet share identification information of developer comments for the apex.oracle.com workspace so that we can see the demo.
If the dynamic action executes an SQL statement or a PL/SQL process on the server that requires page updated element values in session state, specify these items as part of dynamic action Page to submit items .
-
How to stop the automatic zoom input / output when using my mouse?
Whenever I try to do something that involves the use of the needle on my laptop the screen zooms in to the point where the text is too small for me to continue to work. I use Ctrl-0 or select zoom from the menu and zoom out up to 100%. This happens over and over again. I can't do anything with my new computer - surf the web, check your emails, create/edit documents because I continually moved to a new resolution of the screen that is impossible to read.
Your touchpad is probably a multitouch touchpad which is able to detect more than one finger at a time. In fact, most of the new laptops that have these days. If it is too sensitive, it can detect presses when you're not even touch her. Sometimes my palms are considered to be the two fingers and enable this feature "pinch to zoom".
Unfortunately, this is not a Windows control. The hardware manufacturer who built the touchpads provides the software that runs it (the pilot). Some creators of touchpad (as the Synaptics company) have a really robust software that includes a control panel to adapt it in many ways, including this sensitivity and even a few features such as a Palm check that tries to detect when it is not an intentional touch.
You'll have to talk to anyone to build your PC or refer to the manual well because each business is different. If you can display your PC name and model number here, I try to look as well for you.
-
How can I remove the bookmarks that are no longer used.
I have a list of bookmarks on firefox. Many are more used.
How can I remove the individual bookmarls of my list.
Tried to highlight and delete them, but that does not work...You can right click and delete, select and use the key "Delete", or remove
multiple bookmark click to the left of the favorite icon, and then add more with "Ctrl + click"
or spread with "Shift + click" then delete.You can remove bookmarks as described for the deletion of history in
The reference to bookmarks won't in the details, because it is in the article above.
You will be perhaps easier to delete bookmarks you don't want in the list of the bookmarks library. As noted in the article to bookmark sorting you can view and sort by additional columns, I recommend installing the extension "Show Parent Folder" link is in the article to bookmark, unfortunately that you can add the column is not sortable, but it provides valuable information.
-
I open a page web mith several links that appear the same:
www.someurl.com/somepage.SD#
When I click on links, the section of the web page is expanded and more information is displayed. the web page contains JavaScript. So, I want to follow the real URL that the browser visits.These data are retrieved via a XMLHttpRequest to rebuild the part of the page and the URL in the location bar remains the same.
You can see in the Web Console (Web Developer > Web Console;) CTRL + SHIFT + K) as a POST and GET action.
You won't see a history entry in this case because you are not actually visit this web page.
These data are simply used by JavaScript to update the content of the current page. -
choosing the elements to be copied again phone after backup
Hi, I would like to backup my iPhone to my mac and then wipe the phone and then implemented as new and then copy some content in the phone, I do not want to restore all of the content, is it possible?
No, if you are restoring from iTunes
It's all or nothing
Restore your device from an iCloud or iTunes backup - Apple Support
Maybe you are looking for
-
Backup using Time Machine on two external drives?
I know that time the machine supports two separate discs, but my question is: For example: If I have a Pegasus RAID of 8 TB, can I use two external 4 TB to my time machine backup disks? Time machine splits my data through the two HD? Thank you!
-
Windows Live Essentials 2011 KB2434419
Hello I already have 5 copies of Windows Live Essentials installed on my computer and Windows Update continues to try and install one-sixth. Can I get rid of them? At the same time, I checked the update if all goes well, they will stop. Thank you M
-
Rightway gps model 550 screen turned white
Is about six months, is to be works fine and all of a sudden he just froze, then I close it took off and turn on nothing come on the screen except it lights and you c his there I push the reset button and nothing, just a blank screen, result of what
-
I have a Pavilion a1720n office computer that uses Vista Home premium OS. It has USB and USB2 ports. I plan to buy an external hard drive USB 3, thinking that my next computer will have the capacity of USB 3. In the meantime, is my computer a1720n li
-
Hi, im having trouble finding the exact chipset of the Alienware 51 i7 x 3770. I bought a new case, the food and the gpu for the project. I also jumped the gun and the waste of money on a motherboard with a lga1150 socket that I thought would work, b