How to close a responsible testplan using c#-OPUI

Hello

I created an OPUI in ca that loads a testplan and execute it.

But I can not find a function to close an already open testplan.

Means that when I load testplan-1, it runs SeqFileLoad, IO tetsplan-2 load and it runs SeqFileLoad.

But when I insert again testplan-1, so it does not SeqFileLoad because it is always loaded.

So I'm looging for a command anload/close.

Thanks for help

If you try to close a file window programmatically, the following statement illustrates a way to do it. It calculates Locals.Unload to avoid trying to unload a file that is not in a window that displays an error message. You can just this if you know that the file is in a window and you already have a reference:

Suppose the presence of:
Locals.Path (string)
Locals.File (reference)
Locals.Unload (boolean)

Locals.File = RunState.Engine.GetSequenceFileEx (Locals.Path),

We have added a reference to load with GetSequenceFileEx. Check! CanUnload tells us that if the number of references of load is > 1 because it is also open in a window, in which case we want to unload
Locals.Unload =! Locals.File.AsSequenceFile.CanUnload,

release the reference load that we added
RunState.Engine.ReleaseSequenceFileEx (Locals.File),

UNCOMMENT THIS IF YOU DO NOT CLOSE THE FILE IF IT IS RUNNING
Make sure that CanUnload is set to true once we release our reference load
Locals.Unload = Locals.Unload & Locals.File.AsSequenceFile.CanUnload;

Close the file window
Locals.Unload? RunState.Engine.PostUIMessage (null, NULL, UIMsg_CloseWindows, 0,0, "", Locals.File, False),:

Locals.File = Nothing

Tags: NI Software

Similar Questions

  • How to close the drop-down menu that I get when I right click on the arrow to the left (to the left of the address bar)? EXHAUST used to do.

    When a tab has a bit of history associated with it, the back and arrows forward near the address bar (IE lefet) opens this story of tabs when clicked.

    But, I can't close this pop-up history.

    In the past, hitting escape close this window. (firefox 14). Now (firefox 27) ESCAPE does not close the window.

    How to close this window?

    (I want to do this via the keyboard and NOT BY SIMPLE CLICK a RANDOM place on the screen.)

    Thank you Gingerbread Man.

    My problem was an extension: MOUSELESS BROWSING.

    I really like this extension, but he did not get a lot of support.

  • How to close the window of IE on exit_form

    Hello

    Is it possible to close the Internet Explorer window on exit_form?

    Thank you

    How do I close the browser that started a Session of forms [865745.1 ID]
    ________________________________________
    Updated August 11, 2009 Type HOWTO PUBLISHED status
    In this Document
    Goal
    Solution
    Directions for use:
    Manual steps required for FireFox:
    References
    ________________________________________
    Applies to:
    Oracle Forms - Version: 10.1.2.2.0 to 11.1
    Information in this document applies to any platform.
    Goal
    This document will describe how to close the browser window (without confirmation of the user) who was responsible for starting a session of forms.
    IMPORTANT:
    The sample program in this article is provided for educational purposes only and is NOT supported by Oracle Support Services. It has been tested internally, however and works as described. We do not guarantee it will work for you, so be sure to test it in your environment before relying on it.
    The code in this document uses Java Scripting to achieve his goal. If the client computer does not have Java script active or is blocked, this code will not work correctly. In addition, although this document was written as it applies to Oracle Forms, the functionality of the browser and how Java Script responds that it contains, is not related to the product forms. If, for some reason this code does not work for you, the problem is probably the result of changes (for example, updates) made by the supplier of the browser, or a client configuration that prevents the correct execution of the Java Script code. These problems are not related to the Oracle product and you should refer to the manuals of browser or Java script repository to debug the problem.
    This code has been successfully tested with Oracle Forms 10.1.2.3 using Internet Explorer 7 and Firefox 3.0. Be aware that FF3 is not currently certified for use with Forms 10.1.2.3 or more. Other versions may or may not work for the aforementioned reasons.
    Solution
    Directions for use:
    1. using an html editor or text, create a file html with the following code:







    Your browser or system settings prevented this window to close.


    To ensure the highest level of security,


    Please close/quit immediately this browser session.



    2. save the html with the following name: close.htm
    3 store this file on the middle tier in a directory that has an associated virtual path configured on the HTTP server. You can use an existing path or create a new. For example, in the version 10.1.2 you can copy the html file to this directory:
    ORACLE_HOME\tools\web\html
    Practically, the above corresponds to the following by default:
    genres/html /.
    For more information about creating a virtual path to the HTTP server, refer to the HTTP Server Administrator's Guide.
    4. in the Forms application, choose the desired relaxation, where you want to run the browser is closed. Don't forget that by executing this code, the application will be suddenly terminated, therefore, it is recommended that the following code only appear in the trigger of FORM post forms.
    Web.show_document ('/ forms/html/close.htm','_self');
    5. compile and run the form.
    Out of the form, the browser calls close.htm, resulting in the closing of the browser.
    This has been tested successfully using IE7 on XP - SP3. While this code works with other browsers, for example, FireFox 3, a change of configuration in FF are needed to make it work properly.
    Manual steps required for FireFox:
    1. open an instance of the FireFox browser.
    2. in the address bar, enter the following command and press enter on the keyboard:
    Subject: config
    3. in the list presented, locate the following setting:
    DOM.allow_scripts_to_close_windows
    4. double-click on this setting to set its value to TRUE
    5. exit the browser

    References
    http://msmvps.com/blogs/paulomorgado/archive/2007/11/02/how-to-close-browser-Windows-in-Windows-Internet-Explorer-7.aspx

  • I want to download adobe reader and flash player. Adobe says "Please close firefox fozilla continue ' until it loads. How to close firefox and still no adobe web site?

    How to close the foxfire Web site in order to download adobe reader and flash player?

    How do you close Firefox when you are finished using it?

    Tap the X in the upper right or use Firefox > Exit (or File > Exit).

  • Again, does not know how to close the Pages and Keynote

    Stats:

    MacBook Pro 15 inch screen Retina, 2.8 GHz Quad - core Intel Core i7, Turbo Boost up to 4.0 GHz, 16 GB of SDRAM 1600 MHz DDR3L memory, 1 TB PCIe-based Flash storage, graphics card Intel Iris Pro + AMD Radeon R9 M370X with 2 GB memory GDDR5, touch trackpad Force.

    Some of my confusion:

    20 year old PC user just crossed over to the MacBook this week. I can't understand how to close things like Pages, Keynote, Notes.

    Also, I can't understand how to add images and make them in separate folders. I'm a travel blog if it is really important.

    Today, I received the 2015 edition of the MacBook for Dummies, but so far it is not helping.

    Any help will be greatly appreciated. Thank you.

    Or, simply use the shortcut command-q.

  • Error: open the-1073807300, probably because of several sessions of VISA. How to close all?

    I have a simple vi that takes a reading of a picoammeter, using the instrument-specific sub-vis. I guess I'm the new opening VISA sessions each time I run it. Recently I get the 1073807300 error: not enough system resources to perform the necessary memory allocation. I tried to add a close command, but I still think I have VISA open sessions.

    Any suggestions on how to close will be much appreciated!

    Is attached to the original vi (picoamm_1) and initialization void / vi if it can help.

    It's all wrong. First of all, you don't have control of IVI resource name. It's the wrong class. Right-click on the entry of the initialize function and select "Create Control". Second, you don't close the IVI sessions because you have wired it correctly. This shift register is just ridiculous. Do NOT wire your control in the loop and return. You want the reference to the session of the function of the loop of wire at the Close function which is in the driver. As it is to wire the session, the loop will be autoindex in a table. Just right click on the exit tunnel and select 'disable indexing. "

  • How to close the open window by Exec VI system automatically?

    Hello

    I use the Exec VI system to launch an exe that is built from a LabVIEW program. Operational system Exec VI, the window out of file exe and stays there even after all the tasks are completed. I have to close it manually each time. Anyone here know how to close the window of the exe file automatically when it's done?

    Thank you

    Jean

    If I understand the question you add a node to call at the end of your application to exit. As it runs as a stand-alone application or in LabVIEW there will be out or stop the execution. I have attached the VI that I use in my applications.

  • How to close all programs to uninstall end

    How to close all programs for the end of the uninstallation.

    pls advice

    Hello

    It is clear from the description that you want to close all programs to uninstall end

    First of all the notes that you should not close all programs, because many of them are programs of the system and their closure will result in the failure of the system

    1. Right-click your taskbar and click on "Task Manager" or use the combination Ctrl + Alt Delete to open the Task Manager.
    2. In the processes window, select the programs you want to close, and then click "End task" at the bottom

    If you want more help, reply to this message

    Ashwin0

  • How to close a song played in the music of xbox

    While I have a song to play if I can't listen to most how to stop more songs playing music and shut the application down I can't rewind before the break, but stop and close to finish listening

    Hi LeslieO'Brien,.

    Thanks for posting in Microsoft Community!

    I understand it, when you want to stop the songs to play and to close the application you can't do go back so that you can pause, fast forward, but cannot stop and close to finish listening.

    I would like to inform you that it has no function as well to stop the music of the game, but you can pause and play any song of your choice.

    Here, you will use the pause button to stop the music. To close the application, you need to press ALT + F4. This will close the music app. For more information, feel free to post. I'll be happy to help you.

    See also:

     

    How to close an app?

    http://Windows.Microsoft.com/en-us/Windows-8/how-close-app

    Thank you!

  • When I open a document to read like an instruction how to close it.

    I need to know when I open a document on the line as a statement how to close the document and return to the previous screen? I use windows 8.

    If you read the document using a Store Windows app, there is no need to close. Just switch to a different app (for example by pressing the Windows of your keyboard key to access the boot screen, then selecting the next application that you want to use).

    If you close the app and then slide down (or drag if you use touch) from the top to the bottom of the screen. Pressing Alt + F4 will also work.

    Please see:

    http://windows.microsoft.com/en-gb/windows-8/how-close-app .

    If you use a desktop application then the X in the upper right corner of the application should still work the same way as it did in previous versions of Windows.

  • During the installation of Flash Player, I get the prompt to close the customer control panel. What is and how it close?

    During the installation of Flash Player, I get the prompt to close the customer control panel. What is and how it close?

    This link to a thread on this forum about Adobe Flash Player explains how to kill (strong word) the customer dashboard:

    Client dashboard

    I assume you are using a Mac.

  • How to close a Javafx stage in Raspberry Pi

    Dear Experts,

    I'm trying my first application on Raspberry Pi.

    The opening sequence

    -Develop the application on Netbeans7.3.1 on Windows 7 32 bit.

    -Port of the directory dist of Pi by using ftp
    -Run the application using /opt/jdk1.8.0/bin on Pi

    -I enclose the code used for the application

    /*

    * To change this template, choose Tools | Templates

    * and open the template in the editor.

    */

    package pifront;

    Import javafx.application.Application;

    Import javafx.event.ActionEvent;

    Import javafx.event.EventHandler;

    Import javafx.scene.Scene;

    Import javafx.scene.control.Button;

    Import javafx.scene.layout.StackPane;

    Import javafx.stage.Stage;

    /**

    *

    * @author ADMIN

    */

    SerializableAttribute public class PiFront extends Application {}

    @Override

    {} public void start (point primaryStage)

    Button btn = new Button();

    btn.setText ("Say 'Hello World'");

    btn.setOnAction (new EventHandler < ActionEvent > () {}

    @Override

    {} public void handle (ActionEvent event)

    System.out.println ("Hello World!");

    }

    });

    Root StackPane = new StackPane();

    root.getChildren () .add (btn);

    Scene = new scene (root, 300, 250);

    primaryStage.setTitle ("Hello World!");

    primaryStage.setScene (scene);

    primaryStage.show ();

    }

    /**

    * The main() method is ignored in the properly deployed JavaFX application.

    * main() is used only relief in case the application may not be

    * launched through artifacts of deployment, for example, in IDEs with FX limited

    * support. NetBeans does not take into account of main().

    *

    @param args command-line arguments

    */

    Public Shared Sub main (String [] args) {}

    Launch (args);

    }

    }

    My problem is, everything looks good, but the scene didn't close (X) button that is generally available on the upper right.

    I tried also to close the application using a button and try then Platform.exit () and System.exit (0) in the onAction for this button.

    -Platform.exit () makes the application not responding plue - looking as he close the application, but the screen is still visible and the still running process

    -System.exit (0) does not launch the application

    So a very basic question - how to close an application with Javafx running on Raspberry Pi?

    I don't know there is definitely a way for such fundamental thing - your help is greatly appreciated.

    Thank you

    Joanna

    I don't know about the raspberry but on the desktop, it would be primaryStage.close () - walk-it?

  • How to close the scene?

    Hi how to close the scene? The doc says that
     stage.close()
    just mask the window but still exist in memory and frees resources. Y at - it something like
     JFrame.dispose()
    My requirement is first I'll show the step that displays a login form. Once the user s in successfully login I have to close it and open another window that contains information specific to the user. So, what might be the best approach?

    Instead of using the many steps I suggest to use only a step and many scenes.
    Here are some examples:
    Re: How to change several scenes?
    https://blogs.Oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1

  • How to close a mobile application.

    Hey,.

    I test on Android using AIR. I have a simple application that uses a flash drawing with the Enter key.

    However, when I use the hardware of the device back button, it closes to the home screen but not actually anything close. It simply seems to pause because when I re - open the drawing is still there... I use a process manager to force leave and the scene will reset when I open it the next time.

    How it closes when you press the back button?

    Activate and deactivate the property your MXML container file, you can use these to manage app open and close.

    
    

    You can also take a look at sessionCachingEnabled as well as the setting of the destructionPolicy on your point of view.

  • How to close a jmf rtp session when the entire file is sent.

    I use jmf to stream a video file from one client to another, everything seems to work fine except for the fact that I don't know how to close the prosessor and the session/datasink on the transmission side when customers the clientis done streaming, I can close lets say after 60 seconds of starting, but I am not able to understand how to stop when the entire record is streaming. I tried to use the datasinklistner when sending the video and the following code
    public void dataSinkUpdate(DataSinkEvent event) {
    
             if (event instanceof javax.media.datasink.EndOfStreamEvent) {
                 endOfStream = true;
    
             }
         }
    but the endofstream event is never received from the data source.

    the problem is that it works very well if I using 20 second video and I close the datasink and the processor in 60 seconds, the entire file get listened to but if I have a file for more than 60 seconds, then just file is reduced to 60 seconds.

    I also tried to use a sessionmanager a sessionlistener and a sendStreamListener with the following code
    /**
         * SessionListener.
         */
        public synchronized void update(SessionEvent evt) {
    
    
        }
    
    
        /**
         * SendStreamListener
         */
        public synchronized void update( SendStreamEvent evt) {
            System.out.println(evt);
    
         if (evt instanceof InactiveSendStreamEvent) {
              flag=true;
              System.out.println("done");
    
    
         }
         if (evt instanceof ActiveSendStreamEvent) {
    
             System.out.println("start");
    
    
        }
        }
    I ran the code and send files and everything, but neither an activestreamevent nor an inactivestreamevent happens but the file is currently distributed correctly

    user13490676 wrote:
    could this be a problem with jmf itself that the endofstream don't get generated for the playing of a file data source

    In this case, that would be the problem... more that likely there is something odd about the file, maybe it doesn't have a duration set in the header and JMF treats it as a live stream.

    You can always write a custom data source that passes right through the entrance of a normal data source and then generate the EndOfStream event yourself... maybe based on a timeout counter or failure? I have not received all the data in x seconds or after x attempts, so I guess that the file is... Or when you have read enough data that the file cannot have more (read > = file header / data file)...

Maybe you are looking for