How to collect and sort lists of tasks

Similar Questions

• How to design and the list in ascending order from the minimum to the maximum with 6 entries

  Hello

  How to design and the list in ascending order from the minimum to the maximum with 6 entries in Labview?

  It is easy to write in C++, but not in Labview, can be that I am new to Labview. I managed to get the 1st and the 6th after a comparison, but I can't get the 2nd, 3rd, 4th, 5th.

  and can I write language c ++ in Labview VI?

  Thank you.

  Try this:

  

• Some how my address book is only showing the personal address list and not list collected and the list of groups. How can I restore these

  I don't know what happened, but the display of my address book has changed for visible group names and also a visible tab to show the collected addresses. I see now are the personal address list

  Open the address book
  In the Menu bar select view-page-directory pane

  No menu bar? Press the ALT key.

• How to cut and sort clips on the fly... ??

  I have a lot of video of table tennis (ping-pong) that I am the first edition.  I don't do anything too fancy.  Mainly two objectives.  A simple video summary of the matches, but then I also want to cut out all the bad things, too, so I can study to see what I'm doing wrong.

  To get the highest point in I just read on the side of the Source video and use the brand of beginning and Mark Out to select parts of the video, and then I just videos that insert into the timeline.  In the end, I have a nice timeline of all the highlights and I can do what I want with it.

  At this point, however, I have to go back in the all-new and basically do the same thing, but mark the other sections, that I want to go out and add those timeline up to my video "shadows."

  Looks like there will probably be a better way.  How can I manage two of these objectives with a single run through the video?  Can I manage 2 separate calendars, or is there a way to simply record the clip that I scored quickly so that I have easily add to the timeline later?  What would be great is if I could just mark the clips on the way, then save clips in separate folders and return to use those on a timeline later.  Then I can mix the two and have fun with that, too.

  Any information on this would be greatly appreciated.  I feel I'm doubling the amount of time I should be working on this stuff through the videos twice.

  Thank you!

  Another option would be to make one pass in the Source monitor and save a bunch of subitems. Here is a thread discussing the workflows of keyboard: Re: Question on making several sub-elements of a fast

  If you appoint highlights evidence with a base name and the shadows with another, it would be easy to deposit each batch into its own sequence.

• How to find and backup (list of already recorded TV shows) in WMC 7 history

  I'm under WMC 7 and brought some changes that didn't work. Fortunately, I made an image of my system before I made the changes and restore the system for these changes. But I recorded several days value of TV shows after the image was made. I don't want 7 WMC to re-record watch I have have.in my Recorded_TV file. To do this, I need to transfer historical data. My cable system copy protect shows so I don't lose the watch access.to.

  Try mcBackup 3.0

  Mun
  WMC7 record of scheduled backup

• Table data collection and using other calculations

  Hi all!

  I have a table with the information (values), I want to read and collect the 4 values in the table. These must serve more than calculations.

  Take a scenario:
  Let's say the row index is 2.5 and the column index is 5.6 (these values are other calculations), so I'd like to collect the values of the matrix, return (2.5) (2.6) (3.5) and (3.6). Thus, in the closest base to the index value of two integers.

  The next step is to use these four values make a bilinear interpolation (that's my problem), but in order to use them, I need to get them into a knot of formula.

  To sum up; How to collect and store the 4 values for further calculations.

  I hope I explained good enough!

  PS! I'm rather new on LabVIEW, love until now

  Sounds like what you are really looking for is 2D.vi interpolate. Check it out on the range of mathematics under the Interpolation.

  Or you use another type of interpolation function?

  No need to reinvent the wheel if your 2D table represents just the nodes on a surface.

• VBA to print a list of tasks

  How can I print a list of tasks generated using the command line of windows 7: tasklist/m?

  You are looking for a simple code that is a not to be fast... just a code that I can understand the why... am new to VBA

  Thank you

  It is much easier using a command prompt, enter

  TaskList/m >yourusername\Desktop\TaskList.txt C:\Users\

  then save / print or do whatever you want with the text TaskList.txt file

• How can I order a list first for the year and sort the months each year?

  Hello

  I created a report that lists a number of items grouped by month, although elements it since 2012 so together and you spend your order is strange because the groups to report on 2 months.

  example:

  2013 - 01-50

  01/2012 - 56

  02/2013 - 45

  02/2012 - 54

  .

  .

  .

  How do I ordernar first a year and and sort the months each year?

  Sort by DATE... not VARCHAR2

  It is a thing of database, not an APEX.

  In your select statement to the report, the column for DATE information must be one data type DATE or another...

  MK

  PS - TRUNC (a_date_column, 'MONTH')

• Sort the list of tasks

  Hi, I created a componet customized to retrieve information about the task, I use TaskSearchFilter to search for tasks, but how can I sort the list of tasks?

  I know there is filter.addSortDesc (String) and filter.addSortAsc (String), but I don't know what to put if I want to sort by date id or the completion of the task.

  I tried to put addSortDesc ("TaskId") or addSortDesc ("Id"), but it doesn't seem to work. Is docs/reference available for the list of attributes, by that I can fix?

  Thank you

  There is a file of constants in the taskmanager client container.  Here's an example of how use us the filter for tasks for a provided processinstanceid.  We did the sorting on pCREATION_TIME, but it can easily be replaced by pID to sort by task id.

  Temporary TaskManagerQueryService = TaskManagerClientFactory.getQueryManager (clientFactory);

  TaskSearchFilter taskSearchFilter = new TaskSearchFilter();

  taskSearchFilter.addSortDesc (TaskSearchingConstants.pCREATION_TIME);

  taskSearchFilter.addCondition (TaskSearchingConstants.pPROCESS_INSTANCE_ID, Operator.EQUALS, Long.valueOf (processInstanceId));

  List results = tmqs.taskSearch (taskSearchFilter);

  I hope this helps.

• Irregular behavior of the task on all the folders and files list

  Hello:

  The list of tasks that appears as well as hyperlinks to content on each of the personal folders (My Documents, my pictures, and my music), corresponding to each of my accounts 3 user (an admin and two limited), appears the same when I opened to what that is (in 2 music management accounts) and management of images in third-party including their corresponding symbols or icons that are both listed in the list of tasks and in the window itself.

  Even in the help and support center, general information, articles and tutorials, when I search for 'Folder My Documents', among the results displayed are "Introduction to My Pictures Folder" and clicking on it opens the tutorial for "Introduction to personal folders?

  All files on my PC (including the local drive (preload (c)), are also affected, showing the only music management in all its parts.

  The file and folder tasks (rename, copy, move, delete, etc.) in the drop-down menu when you select a folder or a file, are ok and works correctly.

  So, how can I correct this irregular behavior? without having to reinstall Windows if you please...

  Thank you and best regards.
  RickCP

  RickCP-Windows XP Home Edition SP3

  Hello

  As I mentioned in my previous post, please create new account with administrator privileges and check if the problem persists. Follow the steps mentioned in the article below.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• The Task Manager, update the list of tasks and processes, but removes them from the list, the next second.

  It was fine a few days ago, the list of tasks and processes will not be updated until I open/close something. Now, it refreshes the list every second. I tried to change the speed of update, but makes no difference. An answer by tomorrow would be the best.

  More information:
  Windows 7 x 64
  Home Premium Service Pack 1
  Using AVG anti-virus

  Hello

  Thank you for your response.

  Keep the computer in a clean boot and check the status of the issue.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  I would like to aslso season allows you to check the status of the question in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to keep the sort order when you rename a collection?

  I renamed a manually sorted Collection, but the sort order changes. Is it possible to maintain the order of the files when a Collection is renamed?

  In my view, the bridge works correctly implemented. Kinds of collection seem to be kept in a directory UserSort that contains an index and sort sequence list files. In win 7, it's . Entries in the file index.xml include the name of the collection and point to the xml file UserSort containing manually sorted sequences.

  A workaround solution you could try: go to the UserSort/Index.xml file find your former name of collection (.filelist) and change it to your new collection name.

• Fees charged to low project task, how to finance and low Bill task?

  Hello guys,.
  
  Can someone help me on this issue,
  
  Version:-11i
  
  We have the stock transaction costs and WIP collected against low project task (ex:-1.1), now we want to bill, based on Work.We need core funding to generate the invoice.
  
  How can I finance the project for a task below?
  Invoice can be generated at the project level or high-level task, how can I extract all lines of spending for lower task and generate the invoice?
  
  Kind regards
  Smail

  Hi Sissi

  Spending is still the task of the lowest and billing is the task of top of the page or the project level

  You can create work/job or event billing also funds at the top of the task page, when you suffer the lowest costs to the task, during invoice generation system tire are the costs which are eligible and the process and creates one invoice

  hope this helps you

  Thank you
  Krishna