How to communicate via RS232?

I am trying to program a sbRIO-9606 to communicate with a LCD for matrix orbital via RS232.  I have NI-VISA 5.4.1 with NI-VISA 5.4.1 on the sbRIO server software.  But I see no COM port to use to connect.  Is there other software that I need?  Or is there a resource where I can find some instructions about it?

Found!

I also have need of the RT of NOR-Serial installed on the sbRIO 4.0.0.

Tags: NI Hardware

Similar Questions

  • How to contact Compax3 via RS232

    "We have a driver/Compax3 servo controller and need to communicate to via RS232 and the orders of the" object "(e.g."o680.5"retrieves the current position." However, I was unable to get the controller to really transform our engine. Someone has he done that before could provide examples of code?

    LV 2009 SP 1

    Windows XP

    You should still be able to read and write objects while it is configured as a T30, but you would need to write a program of IEC which reacts to changes in your variables.  I just did a project with a positioning more comms, and it was some time ago.  My HMI would send '2O 1901.1 =' to define a position and ' $2O 6103CR "to move to the position.  Note the space, and the Czech Republic is a carriage return.  Unfortunately, Parker US doesn't have much experience with the communcations for this product, and the documentation is poor.  You can call technical support of Parker in California.  Rich Rittis would be your best bet to get answers on it.

  • How to activate the RS232 and USB communication on the guest operating system in vmware ESXi 4.0

    I installed a software in the OS (redhat 5.0) invited to vmware, it must communicate with the device via RS232 or USB

    but not to communicate.

    Vmware tools is installed.

    I try to change the attribute of vmware, add the com port and USB, but still, it does not take effect

    What is the RS232 or USB available on the operating system called?

    How to activate RS232 and USB?

    USB and series are not available in a prompt. There are IP network series and usb IP devices that can be used.

  • connect a spex 1702 spectrometer via rs232

    I'm trying to connect an old Spex 1702 spectrometer to our computer via RS232. I have a few vi downloaded from the HORIBA website that are supposed to work with this series. When I run the 'Start-up.vi' which is supposed to make the connection between the spec and the computer, all I get is the red error light. I am fairly new with Labview and know virtually nothing about RS232, help or suggestions on how to get this connection would be appreciated! Thank you

    Matt

    Former pilots used outdated serial drivers that won't work with the newer versions of LV

    There might be newer versions of the drivers are circulating, but I ended up making my own versions of VISA rather than wait for the manufacturer.  Please note that this was a nightmare to migrate...

    Shane.

    PS To install an older version of LV should also work if the OS is supported (LV 7.1?) and XP

  • How to communicate between instances of Labview application?

    Hello, I have a question on how to communicate data between two instances of labview application on different computers connected via a network.

    I'll explain what I'm doing:

    I have a data acquisition program that was divided into two independent parts. The backend is responisible for the acquisition of data from several DAQ hardware, and the interface simply displays the data collected. The two parties are coupled by events in labview. The backend sends a new event data (for any one listening) whenever he gets new data and the frontend listens to these events and updates of some graphics on the front panel each time it receives this event. Other than the two parties have no communication.

    Now it is necessary to split the frontend and backend on two different computers, connected via a network. The backend will be connected to DAQ devices as usual, but the frontend is running on another computer.

    So my questions are: will be the my current communication mechanism still work on multiple instances of labview application? And if not, what is the best way to connect the two in a minimum amount of new code, and without interrupting the current program, if I decided to their port of return on the same computer?

    (I thought that a kind of middle-man would be the best who is responsible for networking).

    Please, any advice will be useful!

    Paul.

    I think that the best way to do this is a TCP/IP link.  You can do it, as you suggested, with a pair of 'intermediate' screw at one end, catch you user events in a VI and send them over the network; on the other end, you receive data and turn it into an event, requiring minimal changes to the rest of your code.  The TCP/IP screws are pretty easy to use and there are good examples of LabVIEW.  NEITHER offers the Simple e-mail reference library.  You can also watch "robust TCP' Jack Hamilton of LabUseful.com (WARNING: I've never used or not even watched these screws and cannot check they are really helpful, I have seen discussion and links to them).

  • Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

    Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

    Original title: motorola razomax hd

    Hi Bill,

    You can read these articles and check if that helps.

    How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

    Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

    Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

    For more help.

    https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

    Additional information.

    Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

    Response with the State of the question and we will be happy to offer you our help.

  • Reading from the sensor to LabView via rs232 or Subvi problem

    I'm quite new to LabView and not too experienced with instrument control so I was wondering if someone could help me to solve my problem?

    Currently, I'm using LabView 2011 and I'm trying to read pressure DualGauge of Pfeiffer (TPG 262) pressure sensor and display the readings of two pressure on LabView.  However, when I run my program, the pressure readings are not displayed - what is displayed are default 0.00 if same mBar pressure reading a reading of the display of the DualGauge probe.  To connect the sensor, I use a RS232 cable and have managed to find the device on my device manager, so I don't think that the connection is the problem (I've also seen the port appears in the Device Manager, when I connected the sensor via RS232 and USB in my computer).  I also use Subvi Pfeiffer in my code, and I suspect that the problem may be in there.

    Attached is my code and here are links to the manual of the DualGauge and the driver of the software LabView of Pfeiffer

    Double manual gauge - p. 23 and 68 are probably the only things related to the RS232 connection.

    http://www.idealvac.com/files/brochures/Pfeiffer_TPG262_Operating_Instructions.PDF

    DualGauge LabView driver - software Pfeiffer double gauge LabView driver 2009

    http://www.Pfeiffer-vacuum.com/products/measurement/activeline/measurement-equipment/OnlineCatalog.a...

    Any help is very appreciated!

    -Candice

    You have not tested really do anything. Devices and MAX Manager displays only the com port that you added to the computer. It does nothing to verify that an instrument is truly connected. You might have the wrong settings of com or the wrong type of cable serial (null-modem is required). I suggest that you start with program such as hyperterminal, PuTTY or MAX and try something simple. It seems that you will receive an acknowledgement returned by the instrument when a correct command is received. Make sure that this simple step that happens.

  • DASYLab control via RS232

    Hello!

    I use dasylab to a small control. I would like to controll 3 adjustable transformers. The pc with the NI USB-6210 is near the transformer. Via RS232 I want to controll the processors of the control room. I have connected the two stand-alone (one near the processor) and the other in the control room with a cable RS232. Is it possible to use input RS232 dasylab for this effect? I'm just at the beginning of this project, and I appreciate all the information and advice you can give.

    Thank you very much and have a nice day

    Hilby

    For the RS232 string... we expect that the string must be delimited - for example, it ends with a. When you use the notation

    $1

    DASYLab will begin at the current location and put all the characters in the global chain number 1 (${STR_1} in other modules) until the \r (thecharacter). It does not put the delimited in the global chain.

    If you use the store in the chain, then catch it all on the line. If you need to anchor it better, use the string in quotes to search for a unique header before the $1

    "Single text" $1

    will interpret this line

    Single text can be stored in the global chain

    and store 'can be stored in the global chain' in the global chain 1. She anchors on the 'Unique' text and ends at the.

    For relaxation... use the pre/Post trigger... it's more reliable and outputs 0 or 5.

  • How to communicate with the gsm using lab view

    Please, someone tell me about the following uncertainties:

    1 can anyone tell me about the GSM part in lab mode?

    2. how to communicate with the GSM using lab view?

    3. how to publish my data through GSM using lab view?

    4. how to use ipod to send data to laboratory?

    5. what a DAC suitable for ipod?

    6. how to install the lab for ipod DAC mode?

    without worrying

    FR. mohammad rehan

    rehan_the_great wrote:

    Can u please tell me the minimum requirement of computer (labtop) for the use of labview, like ram size, HARD drive, map chart etc...

    A simple search for "labview requirements" on this site would have given you the information you want.

    http://www.NI.com/LabVIEW/requirements/

  • How to communicate esxi hosts to vcenter

    Hi team,

    I just want to know how vcenter to communicate to esxi hosts?

    (a) the name of the officer responsible for the communication between the host esxi and vcenter

    Thank you

    Vinayak

    Hello vinayakshvinayaksh

    Talks of vCenter for esxi host using the VPXD that runs inside the vcenter server and also service vpxa on esxi host that acts as an intermediary service to take the request of vpxd and passing demand to pass that runs on the host esxi ultimately his spend making tasks (like turn a virtual computer to migrate a virtual machine and so on). vinayaksh How to communicate esxi hosts to vcenter

    Kindly mark it as useful or correct answer if that answers your query.

    Rgds

    Frédéric

  • How to register via the microphone port and play at the same time?

    How to record via mic mic.jpg port and at the same time I playt bydownload.jpgport ?

    cs6 hearing support, or any other software would help?

    Your screenshot was a little small so I zoomed in on one of my friends... the 'I' is the area click on my yellow arrow is pointing:

  • How to communicate between the host and the guest in a stand-alone PC

    I have a professional Standalone XP (host) that is not connected to a network. I created a host (XP Professional) using vmware. Pls know me how to communicate and transfer files between the guest and the host.

    Pls post the procedure or send it to [email protected]

    Thanks and greetings

    Ganesh.

    Use "NAT" or "Host-Only' networking for your virtual machine, NOT bridged.

    Activate a shared folder on your virtual computer configuration, map as a network of virtual machine of your shared folder on the host drive.

    Good bye

    Riccardo Riva

    VCP, RHCE, FCNSA

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '. Thank you!

  • How to communicate between different applications on 1 Server?

    As the title says: how to communicate between different applications on 1 Server?

    I'm new to FMS and I am trying to build a program that I need to have a communication between 2 or more applications on the same server.

    How to do this?

    There are several ways to do so.

    1. the favorite for me is make a NetConnection instance of an application to another and make calls between the two using .call NC on one side and client.call interface on the other side

    2. you can use the objects proxy shared to affect this change even

    3 build your own interface for that use the remote features

    Just some thoughts.

    ASA

  • Dialog message via RS232 (how to set correctly)

    Hello

    You know, how to create a message for the choice of the wrongly selected via an RS-232 COM port. I tried to use is displayed to the user, but it appears each time you start... I need proven, just in case an error error (green line). Do you know how to create or sign, or what I have to do a condition? Thank you!

    I prefer to much to unbundle it BY name, but you have the right idea.

    In addition, to facilitate the reading of your diagrams, keep the flow of your data to go from left to right.  Son goes to the rear just confuses people.

  • How do I close the program via RS232

    Hello

    How can I stop the program after I press OK in guest user info? I use line (RS232) series and this part as an attachment is Subvi, the main program is in while loop. But I don't know how I can stop the program after error = true? Is any block for this?

    It will work better if you do it like this.

    Sorry for the late reply, you cought me at the end of my work day.

Maybe you are looking for

  • Mac Pro turns off and restarts

    I have a Mac Pro 5.1.  I recently installed a USB 3 card with Esata OWC.  Occasionally, the system will restart now.  Usually when I use DaVinci Resolve.  My CPU is not overheating. I have too much on the PCI bus?  It doesn't happen when I take out t

  • iPhone 6 contacts do not sync contacts ios

    Hello, I have contacts on osx 10.9.5 v8.0 on my macbook air.  I have ios 9.2 on my iphone 6.  I have two contacts to sync to icloud (at least I think, I have all the correct setting to do).  When I add a contact on my imac, it goes to my iphone in se

  • New user

    How can I use a flash drive and then how I play?

  • BlackBerry smartphones software update to the device to 4.5

    I have a new curve 8330 and I've updated the desktop v4.5 software.  I could not update the software of the device to 4.5 however.  The instructions tell you run Desktop Manager and click Update, but there is no option for it on the desktop.  Here, a

  • I bought an Adobe CS6 to win and I used it until yesterday. Now when I open it is the testing of the CC.

    I bought an Adobe Creative Suite 6 victory and I used it until yesterday. Now, when I opened it seems: Creative Suite 6 Design Standard 29 days in the trial of Adobe CC. But we already have a serial number: removed serial number >.  What can I do?[Fo