How to configure a modem high speed in windows 98

Similar Questions

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Event ID 1 for Intel Bluetooth wireless high speed after Windows Update

  After the automatic update of Windows, I received the following in the event error message where the spectator, telling me that Intel Bluetooth wireless high speed needs to be reinstalled after the upgrade.
  How can I reinstall the Intel Bluetooth wireless high speed on my laptop?

  ----------------------------------------------------

  Source: ApplicationExperienceInfrastructure

  «Bei der application (Intel Bluetooth wireless high speed, von supplier Intel) following problem aufgetreten sind: Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows neu installed werden.»

  + System
  -EventData

  DBType 15
  AppNameCount 36
  AppName Intel Bluetooth wireless high speed
  VendorNameCount 6
  VendorName Intel
  SummaryCount 149
  Summary Um eine einwandfreie Funktion zu able, muss der nach Intel Bluetooth wireless high speed modified von Windows installed werden neu.
  SessionID 0

  Hello

  I put t know what cell phone or what system you are using, but I guess that the laptop uses a combo of Wlan Intel card which supports BT also.
  So I think that you should simply reinstall the Intel Wlan BT driver

  I also found this how to from Intel:
  http://www.Intel.com/support/wireless/WLAN/sb/CS-032541.htm

• How can I get a high speed network wireless EA2700!

  Hello

  I have another problem is that when I used my android devices connected to the router. Max conncet speed is only 65Mbps. But when I use my last router can be 135Mbps. I changed bandwidth auto 40 MHz. thanks!

  Try the single N, WPA2 Mixed mode only, 20 / 40 Mhz and channel 11... ? Ensure that enable WMM is enabled.

  Any other WiFi routers around? InSSIDer v3 app allows to discover... It's free.

• How to remove a connection high speed

  How to remove a connection to wide band? I can't understand how to remove someone can help?

  Hello

  I also suggest you to remove all the network connections on the Network Center and sharing. Once done, restart the computer and create a new network connection and check if that helps.

  See the link below to disconnect the network connections.

  http://Windows.Microsoft.com/en-us/Windows7/disconnect-your-computer-from-a-network-or-network-drive

  Also contact the ISP for more support.

  Hope this information is useful.

• How to lock my network high-speed mobile 3g only?

  I am currently using acer w511 and even though I have a 3G network signal, sometimes, the signal turned to the EDGE network automatically and speed more slowly as *, so I was wondering, if there is a setting to indicate my network still locked on the 3G network only on window 8? Thanks for the help

  Hello

  Changing the settings of automatic NETWORK still locked in a 3G network is not available in Windows 8.

  You can use your favorite search engine and search application which helps you to make the necessary settings on the network mobile broadband.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• How to connect to Internet high speed Roadrunner

  connecrt to roadrunner highspeed internet

  Hello

  1. what exactly is the problem that you are facing on the computer?

  2. what operating system is installed on the computer?

  I suggest you refer to the link to Roadrunner support:

  http://help.RR.com/AA/rrwho.aspx?resetDiv=true&ReturnUrl=%2fHMSLogic%2fmain_contentwell.aspx

• JHeadstart - how to configure the form to be modal window in the style of table-form available?

  JHeadstart release 11.1.2 Relase

  When you use the Application JHeadstart Editor, I chose "table-form" style of layout for the field.

  Issue. When the field editing either way, by clicking on the edit button, which will be the user to the form, is it possible to have the form opens in a modal window?  If Yes, where and how configure this option?

  Summary: currently, the flow is as follows: field displays in a table.  The user clicks on the button Edit and screen refreshes the field in a form.  What I want is to have the form to be displayed as a modal window with the table in the background.

  Thank you.

  
  

  I think you could do this with 2 different versions of the JHS group.  A configured as 'table' and set up the other as a 'form '.  Then, add a groupLink item in the table to open the form in a modal popup.  (you might even be able to link the group to itself, but then you will need to do some adaptations to prevent it to generate the default table-form link)

• Portege A600 - how to use the Modem 3 G on Windows 7?

  Hello

  I installed Windows 7 and I guess that all the drivers that are downloaded from the Toshiba site. The 3 G Modem appears as "modem" and I can create a modem Connection with it, but for sure, it does not work.

  I know online the 3g software f.ex. who is coming with an external modem huawei.
  First this software asks the SIM card pin when starting and then I can specify the apn, the user and the password for the connection.

  I do not found something like this in one of the programs availbale or driver for the 3g modem.

  Please help me as soon as possible because I need this conection on my journey now.

  Kind regards

  Paul.

  Hi Paul

  Check out these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=47480&TSTART=0

  and

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=48294&TSTART=0

  Post edited by: nifer

• How to configure Internet Information Services (IIS) in Windows compressed Surface

  Hello

  I bought the new Tablet Surface of Windows running on the operating system Windows RT.

  I want to configure Internet Information Services (IIS) in the device Surface. So I opened "Turn windows feature on or off" in Control Panel. But this isn't the option 'Internet Information Services' list. Is it possible to configure or activate IIS on the Surface features? Please help on this application.

  Thanks in advance.

  Kind regards

  Hari.

  No, IIS hosting services are not in the RT as a consumer device, it is not intended to run IIS, or even other services, and these services are not rebuilt to run on the ARM processor.

  You could do that from the Surface pro, running the full Windows operating system.

• How to configure the network between the host (Windows 8) and Guest (Linux)

  Hello

  I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

  Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

  Thank you.

  Abdul

  To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

  eth0 is a dynamic IP (DHCP) to get wireless internet access

  eth1 is a static IP address

  

  

• Can I use a connection high speed in safe mode?

  I have something to do in safe mode with internet connection, but I only have a Modem high speed and the computer does not detect the modem how can I use my broadband in Mode safe mode pls help me

  This is not surprising.  For networking Windows in safe mode uses a limited set of common standard network built into Windows device drivers.   It is the basis of the concept of safe mode which can be used to deal with 3rd party driver problems.  Windows does not have a driver for each possible network card / device.  Mobile Broadband are exclusive and very probably not be supported with a native Microsoft device driver.

  What is, is that you need to do in safe mode with networking?  If it is really essential, maybe you could do it on the site of knowledge where you could plug their router.

• USB port high speed - not available on Tecra M1

  Hi all
  I joined my new external HARD drive to my Tecra M1 and XP says I use * not *; port USB high speed.
  Question: How can I switch to high speed USB port?

  Driver: Intel 82801DB/DBM USB 2.0 Hostcontroller - 24 D of Microsoft Version 6.1.2600.0 issued 1.6.2002

  Thanks for the reply in advance.

  See you soon,.
  Tom

  First of all, you can't 'upgrade' your internal USB port to a Highspeed USB port. This is NOT possible, but your machine must have at least 2! ports USB 2.0 capable.

  I suggest you do the following: download the latest drivers for your machine on Toshiba Driver download site, install and check if the error message appears, anywhere you´re attaching your USB 2.0 device.

  Usually one or 2 of these ports should be able to USB 2.0.

  If still, you get the same error message then come back and give some comments, then we can discuss more about.

  See you soon

• How can I get a new computer for Windows 7 starter edition to Ultimate?

  original title: if I do this, how is it working?

  I wat to buy this computer, but it comes with windows 7 starter edition, if I upgradute for windows Ultimate edition will be how it works?, because I want to use only the recognition of the word in Spanish, this is the only reason why I want to buy it, the computer is the following: Acer Aspire One 10.1 "AOD257 Netbook PC with Intel Atom N455 processor & Windows 7 Starter."

  • Intel Atom N455 processor
    1.66 GHz, 512 KB L2 Cache
  • 1 GB DDR3 SDRAM system memory
    Allows you to do the computer basics of web surfing, emails and documents
  • 250 GB SATA hard drive
    Store pictures of 166 000, 71 000 songs or 131 hours of HD video and much more
  • 10/100 fast Ethernet, LAN 802.11b/g/n wireless
    To connect to a modem high speed with Ethernet wired or wirelessly connect to a Wi - Fi signal or a hotspot with the 802.11b/g/n integrated PC connection
  • 10.1 "WSVGA CrystalBrite LED blacklit display
    Intel Graphics Media Accelerator 3150 with 64 MB of video memory dedicated.
  • I want to use it only for speech recognition in Spanish, no games, no additional program?
  • Thank you.

  http://www.microsoftstore.com/store/msstore/en_US/PD/ProductID.216647200

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/Windows-Anytime-Upgrade

  Tom Ferguson