How to configure a port as the port of the server

Similar Questions

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• How to configure Outlook to display the date, they come in too?

  Original title:

  Dating of incoming emails

  My incoming emails list the time they came.  How to configure Outlook to display the date, they come in too?

  Hello

  Thanks for posting that ask about the Microsoft Community.

  I understand that emails do not show the date on which they were received.

  Are you referring to Outlook.com or Microsoft Office Outlook?

  As Zigzag3143 mentioned previously, you should be able to see the dates of your emails received after 24 hours of arrival. If this function does not work for you, I suggest you check the following settings:

  1. View - this is located in the upper left corner of the Inbox pane, the parameters must be defined on all the.
  2. Reorganize by -this is found in the upper right of the Inbox pane, make sure that your emails are filed by Date.

  This should fix your emails in the order of their arrival and should provide the date next to the subject line, if the enamel is older than 24 hours.

  I hope this helps. Answer please if you need more help or have any other question about Windows and/or Outlook.com, we are here for you help.

• How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat?

  How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)

  Hi anne-grethea26777033,.

  You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.

  

  Let us know if that helps.

  Concerning

  Sarojini

• How to configure my PC for the first and after

  Hello:

  I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

  Here is the configuration of my PC:

  -Motherboard: Asus P9X79 PRO

  -Processor: Intel Core i7 - 4820 K 3.7 Ghz

  -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

  -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

  -OS: Windows 7 Ultimate

  -Main hard disk: SSD SanDisk 256 GB SATA3

  I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

  Thank you very much!

  PC hardware is not bad... as it goes.

  What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

  This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

  The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

  However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

  Here is a link to Newegg to the referenced reader...

  http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

  Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

  So... maybe that would 'fix' your questions...

  Neil

• BlackBerry Z10 how to configure gmail so all the messages in the mailbox appears in the BB?

  I'm having a problem with my gmail sync on BB Z10. For some reason, only two or three last messages as shown in the hub-> Email.

  Is anyone know where should I look for to fix and to see all my gmail messages volume?

  Thanks in advance

  Strange indeed. So now, I would say that you remove then re-add, but remember to use the advanced configuration screen. During the process of account add, where it offers 'Add account' with 2 (maybe it can vary depending on the carrier) selections, the first being "Email, calendar and Contacts", instead of what to choose, tap the screen of the low 'Advanced' button and then click on the button to GMail. Be sure to use "m.google.com" for the "server address", '443' to the 'Port', ON SSL, VPN OFF and PUSH next. "Synchronize the calendar", you can choose (30 days maximum).

• How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

  Separated from this thread.

  Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

  Hello

  Please contact Microsoft Community.

  Please confirm which email client do you use?

  I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

  https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Do not hesitate to contact again us for any technical assistance,

• How to configure webgate to use the form on different server login page?

  Hi all, I would really appreciate help with this please.
  
  OAM performs the authentication of the forms on IIS 6. Connection work well on my primary host.
  
  I now need to protect another IIS instance on a different server and have installed a web portal on this topic.
  
  How can I configure it to use the same login for this webgate form? Form: parameter must be relative not sure if this is possible.
  
  So, I copied the original form of the connection in the same relative position on the new server and tried, but concluded that the MESSAGE to the target/access/dummy is now is more caught by the webgate and so I get a 404, rather than a redirect to my page.
  
  Thank you very much
  
  Bernie

  Hi Bernie,

  The challenge parameter redirect in the authentication scheme is used for this. Put the server in this area (for example https://myauthserver.domain.com) and have the form: parameter against that server (for example, /public/loginform.html).

  Either way, on IIS you would put the action of the form to the webgate, for example /access/oblix/apps/webgate/bin/webgate.dll

  Kind regards
  Colin

• How to configure jdeveloper 11 with the .dbc files?

  Hi all
  
  I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?
  
  Kind regards
  Chelsea

  You cannot use jdev 11g for the development of the OFA...
  You must download the patch of jdeveloper on metalink to develop objects of the OFA.

  See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1

  Prasanna-

• How to configure multiple clusters on the same machine.

  I'm trying to configure multiple clusters on the same set of machines. I put the name of the cluster and multiple cases IP addresses different for each cluster. However I am still in train and error stating:
  "This indicates that there are multiple clusters on this network, try to use network configurations that overlap.
  
  Isn't this possible? If it is possible, is it still possible that I need to tell the virtual machines that they belong to different groups?
  
  Thank you
  Jacob

  I put these lines in my script for starting a prod. For dev I REM out as below.

  REM set java_opts = % java_opts %-Dtangosol.coherence.clusteraddress=224.0.0.1
  REM set java_opts = % java_opts %-Dtangosol.coherence.clusterport=65432

  Andrew

• How to define a connection to the server with a cluster of Olite

  Hello
  
  I install my Olite server on a single machine. This server is associated with a module of a repository. Currently, the Olite server point to a single node of the cluster.
  
  Where and how can I configure the server of Olite, then he can use all the nodes off the coast of the cluster (webtogo application and application sync), use the opportinuty to failover and load balancing?
  
  It is in the configuration config xml file or in a file of tnsname?
  
  Thank you

  OH! Oracle RAC right?

  If you use anything prior to the 10.3.0.2, then move to a node, and then change the file webtogo.ora with your RAC tns service name.

  JDBC: Slim: @(DESCRIPTION=)
  (LOAD_BALANCE = yes)
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node1)
  (PORT = 1521))
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node2)
  (PORT = 1521))
  (CONNECT_DATA = (SERVICE_NAME = nodes)))

  You will need to restart the server for the change to take effect.

  Published by: rekounas on October 22, 2008 17:11

• How to create a database in the server-2 based on the game of RMAN backup in server-1

  Hi all

  I need help related to RMAN backup in the following scenario, my server-1 details are given below.

  * Operating system-Windows server 2012 R2 Standard Edition

  * Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  CORE 11.2.0.1.0 Production

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production,

  I have configured RMAN and level 0 and backup of level 1 with on the external HARD drive.

  all the RMAN backup is located in this drive external HARD only, same archivelog.

  My question is,

  How to create a database to Server-2 based on the RMAN backup I took in server-1.

  It's to help me create a server test and even if the server-1 crash, then I can create a database in the new server-2 with backup I took on the external HARD drive.

  Is it possible to achieve the same or not. Kindly suggest me or share a good Internet link or document and share your knowledge to achieve my need of stimulus.  This will really help me

  It does not matter whether you use ASM. The link above should guide you on how to change the file names of data before restoring if the location of the data file on server 2 will be different from server 1.

  Since you asked for 11g binding, it is here

  http://shivanandarao-Oracle.com/2012/04/28/duplicating-database-without-connecting-to-target-database-or-catalog-database-in-Oracle-11g/

  Kind regards

  Shivananda

• Target configuration of AGENT on the server

  Hello
  
  Actually I have installed the client components on my system and component (agent) ODI server on my instance target... now how to configure the agent on my server target so that it can be used my multiple users... How can I create a scheduler agent on my server target to be used from multiple computers cleint of scheduling...
  
  say I started the my agent on the server... what nedopil to the file odiparar.bat on the target server is also targeting...
  
  
  
  
  Thanks in advance...
  
  Published by: user4315565 on January 26, 2010 13:52

  Using your numbers, you must follow these steps:

  3, 2, 4, 1

  and then use the 'Test' button in the physical agent to see if it works...

  Works?

  Cezar Santos
  [www.odiexperts.com]

• How can I get rid of the server box that keeps popping up every 2 seconds?

  The area of the server is a small box that has my server, the user name and the password.  Then has the small checkbox next to save this password in your password list.  Then has 2 small boxes under this sentence that says ok and cancel.  Upward into the left corner of the small box is a button key and tag or readio symbol.  With the sentence next to the symbol that says enter your user name and password for the following server.

  I can't get this box to stop religiously coming every 3 to 5 seconds.  I need help. If someone feels that he can call you my 775 800 1956 number to give me the answer.  Thank you.

  Crystal Geng

  Contact your server administrator / system administrator.

  Unplug any network drive shares.

  Check your Outlook (if you use) configuration.  Solve all the problems.

  Restart the computer.

• How to remove "some files on the server may be missing or incorrect." Muse Web site error?

  I created a separate page out of php, one for the Office site for the mobile version of the Web site.

  There is No error message when you use the desktop version of the Web site (SESSION TIMES) However, there loading the mobile version (SESSION TIME)

  responded here

  How can I fix error of muse "some files on the server may be missing or incorrect."?