How to configure a user name to log in to ASA

Similar Questions

• How to configure the user name & psw for VPN connection in WRT54G?

  Hi all:

  I would like to enable VPn in WRT54G.

  Cann't find where to set up the username & psw.

  Could someone help?

  Client is necessary to set up the username & psw if he did not need to put in place the username & psw to WRT54G?

  Thank you in advance

  Chen min

  It doesn't have a VPN service. It doesn't have a VPN server. You make a connection to the VPN client to the WRT54G.

• Account name My Vista "a name of the user [name] account log does not exist on Windows Home Server" is not, despite the change.

  My Windows Home Server (WHS) prefer the same name of user account on all computers that I use - for the connection and easier access to the files. So to my Vista computer, I changed my account [ancien_nom] name [name]. Vista indicates the name of the new account everywhere but the server after a while (!) stopped recognizing my account and complains about "a name of the user [name] account log does not exist on Windows Home Server" suggesting I should change the name of the account on the ESM. Since I have other computers where I can't change the name of the account (work computer), for this purpose I changed the name of the account on my Vista computer.

  The reason why the WHS could work properly at the beginning maybe I can connect to the WHS folders in a separate process by using the new account name. Choose to save the password - which might have worked for a while, but no more. I also tried to connect as a network device, but I do not correctly reconnect with the identification information data (and saved).

  1 is the name of initial account stored anywhere even if I changed and the reason why it can pop as in this case?

  2. any ideas on how to solve this problem?

  3. or is the problem only on the side WHS - then I might have to turn to a WHS forum

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They will help you in the above Windows Home Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to hide the user name and password to order online using maxl

  Hello
  How to encript my user name and password to order online invites when I'm connecting to the Essbase server by using the batch file:
  
  * 1_Here is my batch file:*
  The file name is AV_Assig_Var1.bat
  /*******************************/
  REM This batch file sets the following variables:
  Set $1 = 'admin ';
  Set $2 = "password";
  
  essmsh AV_Asig1.mxl admin password
  
  /*******************************/
  
  ===========================
  
  * 2_Here is my maxl file:*
  The file name is AV_Asig1.mxl
  
  /*******************************/
  
  
  / * Create a log of process * /.
  spool to 'D:\lova\spool_log.txt ';
  
  / * connection (using a batch file variables * /)
  connection $1 2 on 10.42.100.229;
  
  / * create application and database * /.
  create application AV_Asig1;
  create database AV_Asig1.AV_DB;
  
  / * Log of the process end * /.
  spool off;
  "exit";
  /*******************************/
  * Prompt 3_Command *.
  D:\Ess > AV_Assig_Var1.bat
  
  D:\Ess > rem This batch file sets the following variables:
  
  D:\Ess > rem 1: user name
  
  D:\Ess > rem 2: password
  
  D:\Ess > essmsh AV_Asig1.mxl admin password
  
  Essbase MaxL Shell - version 9.3.1 (ESB9.3.1.0.0A181)
  Copyright (c) 2000, 2007, Oracle and/or its affiliates.
  All rights reserved.
  
  MAXL > login admin password on * 10.46.100.222 *; / * I want to hide this information * /.
  
  OK/INFO - 1051034 - user [admin] connection.
  Last connection OK/INFO - 1051035 - Monday, June 14, 2010 12:44:03.
  OK/INFO - 1241001 - connected to Essbase.
  
  MAXL > create application AV_Asig1;
  
  OK/INFO - 1051061 - AV_Asig1 of the loaded Application - established connection.
  OK/INFO - 1054027 - [AV_Asig1] Application startup with the process id [6792].
  OK/INFO - 1056010 - AV_Asig1 of the Application is created.
  
  MAXL > create database AV_Asig1.AV_DB;
  
  OK/INFO - 1054014 - AV_DB of the loaded database.
  OK/INFO - 1056020 - AV_Asig1.AV_DB of the database created.
  
  
  MaxL Shell completed
  
  
  D:\Ess >
  
  I look forward to input from anyone.
  
  Thank you and best regards,
  Dembele.

  Beyond this thread, I gave a presentation to the MaxL Kaleidoscope that goes in a little depth re encryption and a bunch of other goodies MaxL last year.

  To download, go to www.odtug.com, click on Tech, Hyperion/Essbase resources and use the search box for MaxL.

  There are two presentations by Tracy McMullen and the other by me. Tracy is a good introduction to the various groups of order; my presentation focused on a few areas of depth and one of them being the encryption. The title is "Master Essbase with MaxL Automation".

  You will need to join WORLD to download the presentation, but there is a junior membership, which is free.

  Kind regards

  Cameron Lackpour

  PS WORLD Kaleidoscope 2010 is coming in two weeks, starting on June 27, 2010 - for those of you still on the fence, this is a great conference, and I invite you all to come. The content of this year will be fantastic.

• I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Hello

  I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

  Please give the solution

  What happens when you try to connect?

  If you are able to connect using the different account, try running gpupdate/force.

  If the problem persists, you can open the discussion on:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  What is responsible technical issues forum.

• How can show what user name run from data base users in report page

  How can show what user name of user login to report 10g

  Another qusetion I create report empolyee 012343 identification number but 12343 zehro report shows not how can set it

  someone guide me

  to define the column as a number or character type?

  If it's the number, you can try a format mask with a '099999' 0. I think so.

  or you can select it as to_char (...)

• How to display the user name in report editor RTF BI?

  Please advice how to display the user name in report editor RTF BI?
  Maybe this can be done via a hidden parameter of the report, BEEP, which by default will be implemented with the macro as {$username$} (or smth like)?
  Thanks in advance!

  Yes, or create a hidden report BEEP setting with the name you want and the default ": xdo_user_name" (without ""). And on the report that you call the parameter with the username!

• How to get the user name of the user logged into the E-Business Suite in OFA

  Hi all
  
  I developed a few screens in OPS and recorded also in Oracle applications. I need to enter the user name of the user who has logged in to the E - Business Suite to access my Application OFA, so that depends on his user name I will post a welcome Message on my screen.
  
  Can someone please suggest how to achieve?
  
  With our thanks
  Gerber

  Use pagecontext.getuserId or pageContext.getUserName in your controller

  Thank you
  Kassy

• How to remove a user name from the logon screen?

  Hi all

  I have an annoying problem and do not know how to solve.

  What happened is that used to use my laptop for the log-in het Skype account my ex-girlfriend. But in the login screen continues to display his name as mine always does.

  I used different registry cleaners and uninstalled and reinstalled Skype and had no results.

  How can I remove users on the logon screen?

  Thanks for all the help.

  Basically, you need to remove the folder of the account. I think the second part of this FAQ Help: https://support.skype.com/en-gb/faq/FA142/How-do-I-delete-my-profile-or-Skype-Name
  
  André

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!

• How to change the user name in windows 7 Professional?

  I recently installed windows 7 Professional and by chance I typed my user name and the computer when it prompted me to type it in. When I had typed the wrong characters in and click on 'Next', he wouldn't let me go back and change it, so I was stuck with an unwanted user/computer name. I managed to change the name of the computer for the word you want, but I didn't always know how to change my username.

  I went to user accounts, and there was an option to change the name of the account, so I did.
  However, none of my directories has changed its name, and all processes in the Task Manager were still running under the same previous user name, which I did not want it to be.

  Is there a way to change the username of an account so it affects all the directories, files, folders, etc. without creating a new account with that name? Or, if possible, copy all the files and preferences of the current account to another account with this name?

  Any help is appreciated.

  You cannot change a user account by changing just the name. Simply by changing the name will do a cosmetic change only and does not affect the underlying files/folders in the profile.

  1. from an account with administrator privileges, go to control panel > user accounts and to create the new user account named Standard the way you want to and at least one additional administrator account. Call the last 'CompAdmin' or 'Tech' or similar.
  2 log in to the new Standard user account once if the profile of the files/folders are created and then connect to CompAdmin.
  3. now go to control panel > system > advanced > user profile > settings
  4. you will see where you can copy user accounts. Copy the old account to the new from there. Use her browse to select your new account (C:\Users\newaccount).
  5 log in to the new account correctly named and make sure all your stuff is here and it works as you want. When you are satisfied, you can log on and CompAdmin and remove the old account from the control panel > user accounts.

  If you want to access your account again, it is corrected automatically, follow these steps:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  General recommendations for the establishment of user accounts

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is an OS multi-user with integrated system of accounts such as administrator, by default, all users invited. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrative privileges on Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this by following the instructions written in the first part of this post.
  MS - MVP - Elephant Boy computers - don't panic!

• How to remove a user name of unwanted e-mails that appears only with firefox and not with chrome or internet explorer.

  This problem is to go to a Comcast email address wandering through the homepage of Comcast - Comcast records do not appear this username exists anywhere within their system and says it's a firefox issue. The unwanted name appears that when you use firefox to access the homepage of Comcast and drop sign-in window. When you click on the wrong user name, the message indicates the address is not recognized. Bad user name does not appear when the homepage of Comcast is implemented using chrome or internet explore. Would appreciate advice on how to remove this unwanted user name which seems to lie somewhere in the system of firefox. Grateful to all those who would try to help.

  You can use the following steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list with the mouse or the cursor key
     do not click with the mouse or press the Enter key
  3. Press the DELETE key (on a Mac: shift + del) to delete the highlighted entry

• iOS app how to set unique user name

  Is it possible to store a user name and other details in an ios app on the first run of the application through user input and store this data constantly without another user input for the lifetime of the application? using basic data.

  Many applications store preferences such as what you describe in the application 'settings' of native iOS.  I'm not quite how, but that looks like what you might want to research.

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• How to manage stored user names and passwords on a computer under W7?

  I would like to remove a few names user ID in Yahoo.  Where can I manage these in W7?

  Hi KKBrown,

  Thanks for posting your question in the Microsoft Community Forum.

  It appears from the information you want to remove some names to user ID in Yahoo.

  It would be useful that you can answer these questions to help you best.

  1. you are trying to remove information from Yahoo mail?

  2. you access yahoo mail using the client program webmail or email?

  2. what web browser do you use?

  If you try to delete the user name or password stored on Web sites that you have visited previously by using internet explorer, you can see the article and check if that helps:

  DeleteAutoComplete information

  If you try to manage the usernames stored and passwords on Windows 7, you can use Credential Manager to store identification information such as usernames and passwords that you use to open log on to websites or other computers on a network.

  For more information, see the article:

  Store passwords, certificates, and other credentials for automatic logon

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• On the installer of Windows 7 backup to network drive, how to avoid the user name and password?

  I have Windows 7 x 64 Pro on a PC to my home network 2-computer. Back up my files on a 1 GB network drive using outdated software. I would use the backup of Windows in the same way, but I'm stuck at the first step in backup: "what is my username and password?'." " I have no need to use either as well as single-user computers and log on automatically.

  How can I convince backup W7 to accept that they are not needed? Otherwise how can I, with the status of administrator, either:

  1. check if there is an existing id/password?
  2. If necessary, set up a new id and password without harming my Autologon class?

  Hi Hershmab,

  Thanks for the reply.

  The question that you are running in suitable for the forum on the link below.

  http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/.

  Please report if you encounter a problem with Windows. I will be happy to provide you with additional options.