How to configure a wireless router WRT310N at att westell DSL

Are there instructions explaining how to connect my att dsl westell moden to my Linksys router.  I change to att comcast service providers.  My router worked with my cable model, but I can't configure it to communicate with the dsl modem.  Any help would be appreciated.

You have said that you put westell in Bridge mode and configured the linksys for PPPoE, but also enter AT & T DSL username and password? The manual mtu value and change the 1500 to 1492?

Call AT & T and ask them your DSL username and password. Then enter that on the linksys. Then change the Mtu value and power cycle everything and then you're done.

Don't forget to make sure that you connect the Ethernet cable to the port of your Internet linksys.

Tags: Linksys Routers

Similar Questions

  • Equium L10: How to configure the wireless card to pick up the router?

    Am wireless news and putting in place Broadband BT BT Voyager2091 router. Laptop wireless button in 'on', but is unable to connect or view available wireless networks. How to set up the portable integrated wireless card to pick up the router?

    Hello

    First of all, I hope that your camera comes with the wireless network card and the wireless network adapter is listed in the device under network adapters Manager.

    The card must be activated first with wireless switch that you can find on the front of your laptop near the lights on the system (right). When the adapter is enabled using FN F8 key combination to activate the card. When you use the FN keys in the middle of the screen, you will see a small window. When the FN button pressed constantly, whenever using the F8 key the different symbol will be chosen.

    Go to START > Control Panel > network connections. Click with the right button on wireless network connection and choose Properties. Chose the WIRELESS NETWORKS, tab and activate the option called use Windows to set up?

    At this point the available networks are listed. Select view wireless networks. If your WLAN is listed here you must configure the connection if the password is set.

    Try it!

  • You need to configure a wireless router with my office so I can use ipad. What should I really?

    I have a modem cable from Time Warner (Roadrunner) for internet access. Should I just a router, or do I need to install an adapter (card or USB type)?

    You don't need to install anything in your desktop PC. Wireless routers have ethernet ports you can connect to your PC with a cable.

  • connection problems router WRT310N and wrt54gs * with DSL

    Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

    I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

    A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

    I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

    highlights include:

    (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

    (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

    (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

    router 4) implements the home network wireless very well, but with no internet connectivity

    (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

    I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

    everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

    and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

    so... help?

    still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

    Any ideas on where I'm wrong now?

    Fixed issue...

    in the end, it's a problem between the ISP's modem and the router that they helped me understand.

    My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

    We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

  • 891 wireless router configuration

    I read somewhere when researching this router that the built in AP could be converted into a light and controlled device via a controller centralized. I'm trying to understand how to do this however I can't find any documentation that is supported. Someone at - it any information on that? Or does anyone have a decent example of how to configure the wireless at all?  The documentation is very basic

    Hello

    The links below will provide us with the detailed explantion...

    http://www.Cisco.com/en/us/prod/collateral/routers/ps380/data_sheet_c78-519930.html (support LWAPP)

    http://www.Cisco.com/en/us/docs/routers/access/800/860-880-890/software/configuration/guide/wlan_ps380_TSD_Products_Configuration_Guide_Chapter.html (configuration of the access point for the standalone mode)

    > If you need this add-on AP to act as a LWAPP AP then... enter in the CLI of the AP and the command

    Archive Download-sw/force-reload/crush tftp: / /image

    Concerning

    Surendra

  • HP Laserjet Color mfp M175nw 100: How can I connect the router to secure network?

    How do you set the printer to connect to the network through a router password? Where would you want to enter the password?

    On page 43 of the technical reference software, it shows how to configure the wireless through the built-in Web server.

    This link also have other reference documents (manual, software reference technique, quick reference Guide and Setup Guide) that might be useful in the future.

  • Wrt54g Linksys Wireless Router - connected but not display page

    Halo!

    I have a Linksys WRT54G wireless router - I was able to connect to the wireless connection, but there is no display of the page in the browser.

    What seems to be the problem here?

    TIA,

    wilardboi

    Please reset the router and reconfigure:

    1. hold the reset for 30 seconds button.
    2. then disconnect the Dungeon can now hold the reset button for
    another 30 seconds.
    3. plug back in the power and keep the reset button pressed
    for 30 seconds.
    4. release the reset button.

    Open the configuration of router with 192.168.1.1 page... White-username and password: admin

    To configure the wireless router.
    For wireless settings, follow these steps: -.
    Click on the Wireless tab
    -Here the wireless network mode must be mixed
    -Provide any name in the name box of the wireless network (SSID), while
    without space between the two cases.
    -11 wireless channel
    - And wireless SSID broadcast should be enabled and then click

    Save
    Parameters.
    Please take note of the name of the wireless network (SSID) because it is the '
    Network identifier.
    For wireless security: -.
    Now click the sub-tab under wireless > wireless security.
    Change the mode of WEP wireless security
    Encryption must be 64-bit.
    Let the empty password, do not type in anything whatsoever.
    And under type WEP Key 1 in all 10 digits please. Click Save
    Parameters.
    Please note the 1 WEP key as it comes to the security key for the
    Wireless network.

  • I can't delete the properties of the proxy server on my HP G60 Windows Vista laptop. Need help to access my wireless router.

    I'd appreciate any help or information that may help me set my Internet Options on my IE LAN settings. The configuration that I need to adjust consists of set the network settings on Auto instead of the designated inputs.

    Hi JoseGarza,

    You can follow these links to configure the wireless router & check if it helps.

    Set up a wireless router

    Setting up a wireless network

    Hope the helps of information.
    Please post back and we do know.

  • How to re - configure a Linksys E1200 wireless router after that I got a new Modem

    I just got a new modem.  My E1200 Linksys wireless router no longer works.  Technical support said it should be redefined to work with the router.  How do I do that?  Thank you

    Hi, feibelal ! You don't need to have an active Internet connection on your Mac to be able to access the user interface of the router E1200. The steps in the link provided by Thaddeus_A should do your router works.

    Kind regards

    Ethel_10700

    Linksys technical support

  • RE: router wrt310n - need help for configuring wireless security

    I can get wireless if the router is not secure, but cannot configure wpa and wireless security.  Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security.   In addition, I can't find a way to change the ssid, the pages of router do not match documentation.  The version of my router is v1.  Is this obsolete, I know that there is a v2.  Any help will be appreciated.

    Please follow these steps to configure the wireless settings and try to connect to the wireless network.

    Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

    For wireless settings, follow these steps: -.
    Click on the Wireless tab
    -Here, select manual configuration... Wireless network mode must be mixed...
    -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

    -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
    Please take note of the name of the wireless network (SSID) because it's the network identifier...
    For wireless security: -.
    Click the sub-tab under wireless > Wireless Security...
    Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

    NOTE: The password must be more than 8 characters...

    Click the settings advanced wireless
    Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
    Now let's see if you can locate your wireless network and try to connect...

    IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO

  • I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

    I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

    Hi Tere,

    You can see this Microsoft article to strengthen the security of your computer and your network.

     

    Make your network more secure

    http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

     

    Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

    Set up a security key for a wireless network

    http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

    Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

    Share files via public folders

    http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

    Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

  • How to configure the network wireless with an Equium L40-10 X?

    Could someone please help?

    To configure problems Netgear DG834G wireless router to communicate with my X L40-10. My ISP does not support the Atheros AR5007EG Wireless LAN.

    Thank you.

    Hello

    I can't imagine that it won´t work. Just a few questions:

    -Work with the factory-installed system?
    -Why Don t you use "Utility Configfree" Toshiba?
    -Have you already set on your router and your default machine?
    -Could you please give some information about your system and configuration of routers and computers? Can be useful for those who are not standing next to you, and to have physical access to your machine to check what the problem is. :)

    Maybe you should check these links to see how to connect to a wireless network:

    http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan_4.htm
    http://articles.TechRepublic.com.com/5100-1035_11-1048162.html
    http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

    Good luck buddy
    See you soon

  • How to connect computers laptops xp wireless to a wireless router to connect to a domain

    I have a small office where there is a LAN infrastructure, structured in a field with Server 2003. Now I want new computers laptops xp installed to be able to connect to the domain via the router's wireless connection.

    What will be the default gateway of the wireless router and what settings should I do on the server. The server is configured as a DHCP server. Now, how computer users mobile xp will obtain the ip address issued, it will be the router wireless of Server 2003.
    How can I get this configuration works.

    You must apply to a newsgroup server.

    Windows Server forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • How to configure the network home wiFi with dlink router

    I need to create a home network using the dlink WiFi router
    a computer with Vista and the second with XP
    can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
    I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
    Thank you very muche for your end of the patient cooperation
    in return, I give free cooking classes
    see you soon

    I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

    So I will give you information on doing both.

    Router - configure manually

    Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

    1. turn off the power to your cable modem.
    2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
    3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
    4. turn on the cable modem. After that all the lights are on, turn on the router.

    To configure the router:

    Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

    http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

    This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

    Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

    Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

    Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

    At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

    Networking

    Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

    Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

    For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

    Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

    A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

    (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

    C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

    XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

    Vista - Start ORB > Search > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

    D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

    E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

    F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
    MS - MVP - Elephant Boy computers - don't panic!

  • How do I fix my laptop to connect to my wireless router?

    How do I fix my laptop to connect to my router wirelrss?

    Hello

    Check with the router manufacturer, their online documentation and forums support (if any). Most have
    excellent tutorials online. The router must be configured before connecting to it.

    -----------------------------------------------------------------------------------------------------------------------------------

    More troubleshooting:

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for

  • External monitor flickering Macbook 2016

    I have a Macbook 2016 and an Apple USB - C for Multi AV-HDMI adapter and a LogiLink USB - C for adpater DisplayPort. I am using a Dell 3008WFP as an external display monitor (maximum resolution 2560 x 1600 @60 Hz) with my MacBook, but it doesn't seem

  • v3-571 lose internet every 5-10 minutes

    can anyone help - no one from acer support is back to me regarding this question I've seen on other sites - I've had this laptop for 2 weeks and it keeps going on the internet - if I knew this subject, I would have never given acer my hard-earned mon

  • How can I perform a full backup on Windows XP?

    Hello everyone, I need to perform a full backup on Windows XP. I use Windows XP Professional SP3 x 86 as my current operating system. I wonder how do you and how many DVDs I need to use. I didn't need any estimated time. I have 1.99 GB of memory, a 3

  • Stuck on black screen Vista system restore

    Hi my family Vista premium would not start normally so I tried to select a safe mode restore point. The chosen restoration was cut for more than 12 hours on a screen black now I didn't no what to do next please help?

  • TC6 Firmware - call disconnects after 2 hours

    Hi all Our client complains that after the firmware update on the endpoints of telepresence (C40, C60, EX90) to TC6.x, there are two questions: 1 end with TC6.x points will disconnect after 120 minutes to be connected to any appeal initiated by the r