How to configure a WPS device?

Similar Questions

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• Satellite L500-14N - how to configure the Bluetooth device?

  I can't set up Bluetooth device. I don't know my computer who bluetooch crutch.
  Please help me.

  Thank you!

  Hello

  Are you sure that your laptop is equipped with Bluetooth?

  I even checked the specs on the Toshiba page and it seems that Satellite L500-14N isn t equipped with Bluetooth and so you can configure it.

  Sorry, mate, but your laptop doesn't have Bluetooth.

• How do I configure the bluetooth device

  Original title: pls help bluetooth & windows XP

  so brought of speakers of wi - fi creative d80 to my pc. I tried to activate bluetooth in downloading drivers. is it true that you can not bluetooth windows xp?

  Hello

  Thanks for posting in Microsoft Community

  I appreciate that you try to configure the Bluetooth device in Windows XP.

  I will definitely help you with this.

  Please follow the steps in the link.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883259?WA=wsignin1.0

• How to read the e-mail configured on the device

  Can we get the e-mail address of the account that is configured on the device in bb10

  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__identity__blackberryid.html

• How to configure iCloud drive on an iPad Air

  How to configure iCloud drive on an iPad Air. There is no other choice when I go into the settings to iCloud

  See here- setting of the iCloud Drive on all of your devices - Apple Support

• How and where should I go to find out how to configure my joystick so I can use the joystick to use the flight simulation game that I bought from microsoft?

  I can't find out how to configure my joy (attack3) stick to play Flight Simulator. I don't want to use the keyboard on my computer to steal the game... Where can I find the instructions on how to configure and use the joystick?

  Hello

  1. what happens when you connect the joy stick?

  2. do you get an error message?

  3. what version of Windows are you using?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Flight Simulator x: using a gamepad

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16624

  Step 2:
  Usually, vista Windows 7 will find and automatically install the necessary drivers when you plug your game controller into your computer.

  (a) connect the joystick to the USB port via the adapter.

  (b) see if it is detected.

  (c) Windows should recognize the new hardware and set in place to work properly.

  If this isn't the case, install the relevant drivers for gamepad for the manufacturers Web site.

  Step 3:

  I suggest the following steps and check for the device.

  1. in Control Panel, open game controllers. To do this, use one of the following methods:

  a. click Start, typejoy.cpl in the Search box and press ENTER.

  2. click on your game controller, and then click Properties.

  3. on the Test tab, test the game controller to verify functionality.

  Here is the link:

  http://support.Microsoft.com/kb/831361

  I hope this helps.

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• How to configure DiffServ on PC6200

  Hello

  I need to configure DiffServ on a switch of PC6248 and PC5548. Can you provide an example config coomands creating 2 classes. 1 video and 1 data and assign it at the end of the ports of the device.

  Also how to configure ports trunk with classes? It is even necessary?

  Thank you

  To use DiffServ QoS, we must first define their criteria and categories:

  1. class: create classes and define criteria of class

  2. political: create strategies, associate political classes and define policy statements

  3. service: Add a policy to an incoming interface

  Packets are classified and treatment on the basis of criteria defined. The classification criteria is defined by a

  class. The treatment is defined by the attributes of a font. Policy attributes can be defined on a per class

  each instance and it is these attributes that are applied when a match occurs. A policy can contain

  multiple classes. When the policy is active, the measures taken dependent on the class that matches the package.

  Package treatment begins by checking the class for a packet matching criteria. A policy is applied to a package

  When a class is within this policy is found.

  The Differentiated Services menu page contains

  If you had a video on VLAN 22 and wanted to assign a specific preference and assign it to port 1. Orders should look like this.

  class-map correspondence test22 ipv4

  game of vlan 22

  output

  Policy-map test23 in

  class test22

  Assign-queue 4

  output

  interface ethernet 1/g1

  service-policy in test23

  There are several different match criteria that can be used. The user and CLI guides describe the available options.

  http://www.Dell.com/support/manuals/us/en/19/product/PowerConnect-6224

  Hope this helps

• How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

  Separated from this thread.

  Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

  Hello

  Please contact Microsoft Community.

  Please confirm which email client do you use?

  I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

  https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

  I hope this helps. Do not hesitate to contact again us for any technical assistance,

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• BlackBerry smartphone how to configure and use e-mail without BES

  Hello

  I'm trying to figure How to configure and use e-mail without using a BES.

  I checked with the local telephone company. And the number is not ascociated with any service of BES.

  The entry of services show no indication in this sense.

  In addition, the configuration of SIM card show that everything is disabled. This means that the phone is unlocked. At least that is my understanding.

  However, even after a wipe, the BB device does not set up an e-mail account, as described in the manual. He keeps asking for a BES activation first.

  What will do that disappears?

  And to allow the configuration of the "spam"?

  Just develop the right answer given by JSanders, you can always access your email accounts and social networks (facebook, twitter, google +, etc) on your phone, you will just have no notifications PUSHED to your phone.  You can access the internet on your phone in order to access these accounts, but it should go to them.  With BlackBerry Internet Service activated on your phone account, RIM will push these notifications of new emails, facebook messages, new tweets etc. for your phone.  That's what you'll be missing out on without active BIS.

  I wanted to just make sure that there is no likelihood of confusion.

• How to configure a SSID without output interface

  Hello

  I have a WISN, and I want to set up a local network with a special SSID. No computer required to get out. How to configure the interface?

  Thank you.

  Hello

  No Go - does that mean Internet? If so, the WLC doesn't routing... the routing is done on the code or the distribution switch or router. thei device do not NAT the subnet that you need, so that the concting of customers in this wil WLAN not being able to get out to the theinternet!

  Nothing much to do on the WLC... just a WLAN and the mapping interface.

  Let me know if that answers your question and please do not forget to note the useful messages!

  Concerning

  Surendra

• How to configure the drivers in Windows 7 acer aspire 4339-2618

  When you install the device has a network window manager, a controller ethernet one a communcative adapter pci drivers and others and has too be configured in the Device Manager there look on a list on your computer or online it find a solution online if you have too get themm o that you would use in free software or out of my list of managers acers computer peripheral drivers again its an acer 4339-2618 and how to set up a network that sends messages of error with the ethernet cable may be broken point access and such bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb issues

  Hello

  1. What do you mean "has too be configured in the Device Manager there look on a list on your computer or online never find a solution online if you have too install manually '?"
  2. do you have problems installing the drivers?
  3. you are not able to access the Internet?

  I suggest you try the steps from the following links:

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Response returns with the information required to help you solve the problem