How to configure Classic Mode ADG excerpt?

Similar Questions

• How to configure Gemfire mode client/server with external supplier of XA transactions

  Hello

  I would like to have a transaction between the operations of Gemfire and WebSphere MQ using Atomikos as XA transaction manager.

  The documentation is rather evasive about how to configure Gemfire with an external transaction manager when using a client/server Gemfire deployment.

  Any help appreciated.

  Thank you!

  Unfortunately the Atomikos is not supported. Please see this thread for more information: GemFire and Atomikos in tcServer

  -Jens

• How to configure the mode of kiosh for thin clients on windows server 2008

  I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.

  I'll have another group that more access is needed.

  Kiosk.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I NEED CLASSIC MODE AND I CAN'T UPGRADE! Help!

  So I just bought a new mac mini, a week ago and I'm very excited to start using my copy of the Adobe photoshop cs2 again, but I have a copy of adobe photoshop 6.0 and I use and upgrade to photoshop cs2. I just discovered that I can't install photoshop 6 because that mac support more classic mode! so, how do the classic mode with them having to demote for mac OS 9? is there another way to get around this? I don't want to have to buy a copy of 600 dollars in photoshop just to use the copy that I already have!

  No.... When you install the upgrade from CS2, you must enter the serial number CS2. Then, there is a screen that reads something like "Research previously installed version" and a stop"" button. Click the stop button. Then, choose the option 'Use serial number of the previous product' and insert the serial number v6.

• How to add a new currency base in Classic Mode

  HELO,
  
  Please, let me know how to add a new base currency (RON), using the Classic Mode, when creating a new planning application (version 11.1.1.3).
  For now, at the time of the creation of a new planning application you can select the currency of a list (you can not substitute or add a new one).
  
  I guess, I have to manually change the base currency in the relational tables of RON after the creation of the Planning Application.
  If so, please, can you confirm all the tables involved?
  
  Thank you very much
  Robert

  Hello

  You can have a base currency, and when you create an application you can select the currency from the list.
  There was another post earlier around the same area:- Re: doubts currency

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to configure iPhone to get an exit "braille display" correct in Chinese, traditional way?

  We realize that somebody helps us to clarify the question of using iPhone (iOS9.3)

  When you use "braille display" under the English mode, the output is correct. However, using "braille display" in Chinese, traditional mode, the result is false. How to configure iPhone to get an exit "braille display" correct in Chinese, traditional way?

  did you ask the developer of the accessory to display braille at the end of the day, they are the only ones who can provide a 100% response

• How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?

  How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?

  Sorry, there is no setting for what is built into Firefox.

  https://addons.Mozilla.org/en-us/Firefox/addon/tab-utilities/
  
  In the utilities tab > Options > links there is a preference to enable single window mode.

• Printer inkjet HP 4630 AIO: How can I disable mode "sleep" on my HP4630 printer.

  I would like to know how to disable mode 'sleep' completely on my HP 4630 AIO inkjet printer. The printer is on my wireless network. Whenever I want to use it is asleep.  I put on the highest 15 minute sleep setting. Is there a way to disable the mode 'sleep'?

  Hi @lcicero1

  Sorry to send another document but here is a link to how to configure your wireless printer:

  http://support.HP.com/us-en/document/c03834108

  Hope this helps

  

• How to exit safe mode in windows 8.1

  I entered in the Mode without fail my desire TS 15 running windows 8.1 to correct some problems with my Norton software and now I can't understand how to exit back to the normal mode.  Internet is off in safe mode (even though I chose the mode safe mode with networking) so I can run any of the resolutions & assistance.  Someone knows how to do this?

  Nanna,

  Welcome to the HP Forum.

  Try / review

  Control Panel > display icon > Administrative Tools> System Configuration >

  Boot Tab > UNCHECKstartup

  Restart/ reboot the computer and log in

  OR

  A different path to the same place:

  ·         Start Notepad and let it boot mode safe

  ·         Open a session

  ·         Windows key + R(open the run window)

  ·         Type msconfig

  ·         Opens the System Configuration Menu > tab click on Boot

  ·         REMOVE the check mark next to startup > Applyto save

  ·         Restart/ reboot

  ==========================================================================

  In addition, you could do your router security is set to

  AES encryption type

  and

  WPA2-Personal security type

  ==========================================================================

  For later, it's very useful to have, and it is easy to set up.  I did it.

  Safe mode can easily be added to the start screen.

  How to add 'Safe Mode' to the Windows in Windows 8 boot manager and 8.1

  From:
  Features of Windows 8 - a Quick Tour

  Click on the Thumbs-Up Kudosto testify and say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• How to configure SCC-Ci20 ISP with SCC-68

  I'm trying to measure a current analog signal using scc-ci20 scc-68 and pci-6221.

  I used the scc-68 for analog measurement signal voltage using analog terminals, so the scc - 68 and pci-6221 are well configured.

  What I did:

  I added the scc-ci20 "measure and explore automated" under the scc - 68, CSC - mod 1

  In the software labview in the DAQ assistant, I added a new channel for current measurement and physical channels appearing were "aio, ai1' which is the channel of the Terminal screw 1 Module and not of the scc-ci20 terminal block.

  Also, I connect to the meaning of the Al to Al GND.

  I don't know, if the DIF in how to configure the current module or how I connect the resistance to the Terminal Board and the scc-68 port.

  Hi Egptos,

  The SCC-CI20 channels are grouped in a differential measurement that is able to fill two separate loops, so the ai0 ai1 and. AI0 is the bundling of channels 1 and 2 on the module, who complete a circuit, and ai1 represents channels 3 and 4 that complement a second loop. The resistance of shunt used by the module to take the current measure is incorporated in the module.

• How can I activate mode "Developer" on xperia Tablet z?

  Hi all

  I own a Tablet new xperia z.

  One thing that I was like is that default Chrome to the display of the Desktop version of a web page by default (rather than the mobile version of a site).

  I found information online explaining how to proceed:

  http://www.guidingtech.com/16169/desktop-mode-websites-chrome-Android-permanently/

  I wanted to perform the steps described in the "for users without Root access", because I do not want at the root of my brand new camera.

  It comes to getting the work of adb command. I could get this tool via a "mini-sdk" provided on this site:

  http://androidforums.com/FAQs/443072-ADB-guide-updated-2013-05-21-a.html

  When I run the command adb suggested, he noted:

  * demon does not. from now on port 5037 *.
  * the daemon started successfully *.
  error: device not found

  I then read this page about the adb via the "usb debugging": setting Protocol

  http://eSupport.Sony.com/info/878/us/en/

  However, when I try to visit the "USB debugging" on my camera of xperia z equivalent setting, all settings in the 'Developer Options' section are disabled.

  I then read this web page describing how to enable "developer mode":

  http://www.droidviews.com/how-to-enable-developer-optionsusb-debugging-mode-on-devices-with-Android-...

  He suggested going to 'away'and clicking on the 'Number of Build' seven times to activate this setting...

  But when I try this, it doesn't work on my device.

  I've been Googling for awhile to see if the sony devices have an unique alternative to do, so far without success.

  Then you would be able to tell me how I can configure the developer mode on my sony xperia z Tablet?

  Thanks for any help.

  Gurce

  H RyanC,

  Thanks for the link. Unfortunately, the forums are currently read-only, so had the chance to ask the Q it. I tried the the form "contact us" a few days ago, no answer yet.

  But fortunately, I was able to fall on the answer by myself. Will write the answer here, for the benefit of third parties who need to understand this point and to throw off by all the dishes google obfuscation upward:

  • Come on in "settings > developer Options"
  • Notice in the upper right of the screen there is a switch small horizontal slider
    (it is in the 'Settings' title aligned to the right bar)
  • The slider is currently set to the left, then drag it to the correct position
  • A popup appears saying:

    "Authorize the parameters of development?
    These settings are only for development purposes. They can cause your device and applications on it to break or misbehave.

  • Click on 'OK'.
  • You can then enable options such as "USB debugging" in this menu

  I'm a happy chappy now

• How to configure a RV042 behind a DSL Modem?

  I have a router RV042 VPN that I try to use VPN in to my computer at home. My House uses a DSL modem to connect to the Internet. How to configure the ADSL modem to connect the router?

  The modem is a gateway and I put this bridge mode and changed the router RV042 to PPPoE (according to your instructions) and now I can able to administer the router RV042 from my work computer and get out to the internet from my computer at home, one more step. Now when I try to VPN using PPTP in it connects then drops out me after about 1 minute of sometimes more sometimes less, but never more than a few minutes. I tried to adjust the MTU on the documentation of support, but that did not help. Any thoughts?

  Thanks for your help so far

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• How to configure a different account on Vista Home Premium?

  How to configure a different account on Vista Home Premium?  I tried the windows help site, but it does not give me the steps to do so.  Please advise me if you have time.  Specifically, I want to create an account for the child so that I can restrict.  Thank you.

  How to configure a different account on Vista Home Premium?  I tried the windows help site, but it does not give me the steps to do so.  Please advise me if you have time.  Specifically, I want to create an account for the child so that I can restrict.  Thank you.

  You must be an administrator or in possession of a password for admin to create a user account.

  Start > Control Panel > Classic view > user accounts > manage another account > uac prompt > click on create a new account > follow the instructions on... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to configure the generic Dashboard widget to interact with the other widgets 5.6?

  VCops 5.6 I can see that the generic dashboard can act as a receiver widget.   However, I can't figure out how to put in place to receive data and at the height of the selected metric.  For example, I would like to have 3 parameters of cluster displays the dashboard then choose a cluster to the health of the company and have it change the settings to use the selected cluster.  I can't choose a metric of cluster without choosing a specific cluster.

  Thank you

  -MattG

  Generic interaction Widget Scoreboard is intended by using the configuration of "Mode of Interaction of reference". In other cases, it is impossible to see the results of interaction for the widget.

  Configuration interaction "Res. Interaction Mode' only works for the predefined settings (predefined in the XML file). Also, this resource should be provided during interaction (to make a widget to generic dashboard). User can set the interested metric, which will appear on the dashboard widget after the interaction of the resource.

  Please find below the steps to configure and set of interesting measures via XML file and allow interaction for them, in generic Scoreboard widget:

  (1) edit the file 'sampleScoreboard.xml' in: / usr/lib/vmware-vcops/tomcat-enterprise/webapps/vcops-custom/WEB-INF/classes/resources/reskndmetrics

  (2) configure the XML file by your best adapter type, type of resource, and metric, beaches of colour/threshold for each attribute/metric. And to see that only your metric set register after the interaction resources widget generic Scoreboard (resource).

  (3) ' provider' on OFF display of the widget editing mode.

  (4) select the interaction of your generic Scoreboard widget provide.

  After such a configuration, you can make interaction by resource to generic Scoreboard widget.

  hope this helps