How to configure controls/indicators of Labview so the TestStand will automatically import the
Hello
I am fairly new to Labview and TestStand.
I created a simple GUI of Labview with controls and indicators. When I add the labview module to TestStand it doesn't matter these controls/indicators.
What should I do to get TestStand to import these controls/indicators.
Thank you best regards &,.
Aly.
Is this just a VI LabVIEW implemented as a step of TestStand? If yes associate you controls and indicators to the connector pane in the upper-right corner of the LabVIEW vi? (index right click the icon and select Show the connector pane)
What is a LabVIEW to Interface to operator TestStand implimentation? If if look at the examples in file for Simple Interface operator of LabVIEW TestStand.
Tags: NI Software
Similar Questions
-
How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?
original title: automatic Wifi connectionHello
By default, Windows XP attempts to connect to networks without wires in the following order:
- Available networks that are in the list of network preferred (by order of registration)
- Preferred networks in the list proposed (by order of registration)
- Other networks according to selected advanced settings
Check out these articles and check if that helps:
To connect to an available wireless network
To set up automatic wireless network configuration
5 steps: how to set up your network wireless home
http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
-
How to lock a line under a shape so it will automatically extend when you drag the shape? I can't figure out how to turn this feature on and outside.
Maybe it's what you've done I didn't read all the post in the thread so if someone already mentioned what they give you the path.
-
Satellite L20-257: how to configure controls for WinAmp
My Satellite 20-257 has 4 buttons on the keyboard, which are in the Windows Media Player control during playback. I would like to know how change this settings and define VLC other WinAmp is controlled by these buttons.
Thanks for a quick reply.
! RjKO!
Hello
As far as I know the control buttons are pre-installed and configured for 2 applications. If the CD has been inserted the Windows media player if poster and if the DVD has been inserted the DVD software Win will start.
With another application configuration is not possible.But check out the Winamp site. There may be some plug-ins.
-
How to send a nxt program labview in the mindstorm block
Hello
I would like to know how to send a writing of nxt program on labview in the mindstorm block for not using usb and bluetooth connection
In order to start a program directly with the block
Thanks for your your answer attentionand
Hello
National Instruments does not directly support the LEGO Mindstorms Nxt please refer to this KB see were you can ask for help.
-
Relay control using cRIO LabVIEW and the NI 9472 c series module
Hi all
I try to get my program to run so far without success, and need help.
I use the compact rio with the program on labVIEW and the NI 9472 digital output module. I enclose my VI.
Basically, it's a test program to run an algorithm at a time. If I use a solid state format to get a time warp that dictates, time of execution of the algorithm. The operation by default, I put is for when the time channel produced a fake.
Question 1: The problem I have is that even if the time string is true, as it does not run. It remains in State sending false so only of false signals to my relay (which is represented by the round LED - relay switch a solenoid on and outside).
Question 2: If I can get 1 problem solved, the next step I have will be executing the same algorithm, but for more than a State of time. For example. "06:00" run algorithm. I want this algorithm to keep running as long as he sends signals REAL (which means the solenoid valve remains open until a WRONG signal). Then he will run again to say '08:00 ', execute the algorithm as long as he sends signals REAL and so on...
In summary -.
-I want to order a relay (which controls a solenoid)
-L' use of components listed above
-With the help of semiconductor in labVIEW (VI attached)
-At different times, the execution of the algorithm UNTIL sends the WRONG signal and then return to the default state, which means that his waiting until the time channel product TRUE.
Any help would be appreciated.
Kind regards
William
something like that...
-
How to configure nested ESXi 5 to take the EVC Clusters supported
Can someone give me instructions on how to configure nested ESXi 5 Support EVC clusters help please?
Thank you
JOhn
Please follow: how to configure nested ESXi 5 to the EVC Clusters of support | virtuallyGhetto
-
At the opening of a bridge of fthrough Photoshop file, how can I check which version of Photoshop, the file will open in?
I store my PSD files that is adjacent to the original RAW file which it originates.
If I open the folder and double-click this PSD file, it opens to the CS6. But, if I use the bridge (CS6) for access to and open the same file, it starts by is Photoshop CS5 and then opens this file PSD in CS5.
How can I control which Photoshop will open a file then choose to open it through Bridge?
Interesting, but it does not give any idea what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location of Curt and Photoshop Document research. Beside him ideally should show Adobe Photoshop CS6 if you have Bridge open CS6. Click to provide the fly on the menu and choose the correct Photoshop from the list.
But probably something went wrong with your installation. By default, Bridge chooses the latest version of PS to open its plug in.
Maybe reset preferences may also help you. Can you provide more details about the version of the OS etc.
And you have a good reason to keep your Raw and finalized in the same place files. Personally I put them aside and use a convention of appropriate filename (YYYYMMDD and details) so I can easily search the DNG files in my archives if I needed, but I don't make mistake by opening a bad
-
The place of my bottom right of the Firefox window is normally under the lower part of the bar to the right of the horizontal scroll bar and vertical scroll if there. The square is used to click and drag to resize the right side of the window and the substantive limits.
This is when a web site up its vertical scroll arrow button in the lower right. I can't access the arrow key down with my mouse to cause the page scroll down a few lines at a time because when I point the mouse there, I get the resizing of the controls instead. Even if the arrow button is clearly visible on the screen, the controls resize are supported and I can't use the scroll control.
Two example web sites display their willingness to arrow down while at the bottom of the window; TIME.com and GMAIL.com. I also saw two PDF documents in the browser, too, I have a vertical scroll bar all the way down and I can not use this button arrow down, because instead I get the North-West-South-East click to resize cursor instead of the mouse pointer when I try to use this button to scroll.
Someone on the Google Help forum was not able to reproduce this problem, showing me the screenshots of his right lower mouse behavior. But there is no resizing control which covers access to the scroll bar.
I use the latest Firefox, I have reset Firefox, dumping so all my Add-ons and parameters customized and gave only AdBlock Plus and Cookie Monster. And, when I asked a similar question.
I'm running Windows XP, on his last days of support. This computer is not able to run something more recent, unless I run with Linux.
Go to TIME.com, its vertical scrolling is in the lower corner and I get the resizing of the control instead of the mouse pointer arrows when I point the down key. If I disable the page styles on the view menu, I get a useful result that defines the end of the vertical scrollbar above the lower corner. If someone the idea of the style of the page (CSS) creates this problem for me.
Go to Gmail, turning off styles gives me a useless output of nonsense, so I have to use the current page style.
Can someone please give me some advice? This forum page has vertical and horizontal scroll above and to the left of the place of the corner down. I have access to all parts of the two scroll bars, as is done on most well-designed pages.
My window - resize controls are always responsible for the place of the corner down even if vertical scrolling is supposed to be there.
See also my first formulation of this question: https://support.mozilla.org/en-US/questions/993519
Please try my extension Remove Resizer 1.1.
-
How to create a section in labview using the screw configuration file
I am trying to create a new section in Labview. All I see is the possibilties for reading of the sections and keys, write key, remove sections. Is it possible to write a new article in Labview.
Thank you
Brandon
When you write to a key, you will need to provide a section. If the section is not there, then it will be created. Basically, you can have a section without any keys.
-
How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.
Hi all
I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc. Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access. Can someone share me how to initiate this, creating policies.
FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.
Kind regards
Marlon
Marlon,
I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2. This configuration may not work because yours is Junos, but it could bring closer you reach to understand. Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)
Good luck!
-Chris
Title: Example configuration - GSU of Juniper and Cisco ACS v5.x
Product: SSG320M juniper (Cisco ACS v5.x)
Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)
Network topology:
[Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
Description:
Goal - authenticate GSU administrators using GANYMEDE + instead of local connections
Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.
ACS v5.x is a VM based on Linux with a completely new user interface and structure.
Configuration:
Configure the Juniper (CLI)
1. Add configuration Cisco ACS and GANYMEDE +.
Set id CiscoACSv5 of auth-server 1
set the auth-CiscoACSv5 server ServerName 192.168.1.100
set server CiscoACSv5-type of admin account
set the server CiscoACSv5 auth type Ganymede
Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
define CiscoACSv5 Ganymede 49 auth-server port
Set the server auth admin CiscoACSv5
Set admin auth distance primary
Remote admin auth root set
define outer-get administrator privilegesConfigure the Cisco ACS (GUI) v5.x
1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
Create the profile of Shell of Juniper.
Click the button [create] at the bottom of the page
Select the general tab
Name: Juniper
Description: Custom for Juniper SSG320M attributes
Select the custom attributesAdd the vsys attribute:
Attribute: vsys
Requirement: required
Value: root
Click on the [Add ^] button above the field for the attributeAdd the attribute of privilege :
Attribute: privilege
Requirement: required
Value: rootNote : you can also use "read-write", but then the local admin does not work correctly
Click on the [Add ^] button above the field for the attribute
Click the button [send] at the bottom of the page2. navigate to access policies > Access Services > default device Admin > authorization
Create the authorization policy of Juniper and filter by IP address.
Click [customize] at the bottom right of the page
In terms of customize, select IP address in the left window
Click the [>] button to add
Click the [OK] button to close the windowClick the button [create] at the bottom of the page to create a new rule
In general, the name of the new rule Juniper and make sure that this option is enabled
In Conditions, check the box next to IP address
Enter the ip address of the Juniper (192.168.1.100)
Under results, click the [Select] button next to the Shell profile field
Select "Juniper" and click the [OK] button
Under results, click the [Select] button under the command field sets (if used)
Select "allow all the" and make sure all other boxes are not CHECKED
Click the [OK] button to close the window
Click the [OK] button at the bottom of the page to close the window
Check the box next to the policy of Juniper , and then move the policy to the top of the list
Click on the [Save] button at the bottom of the pageAudit:
Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.
-
I use Bit Defender and Windows Security Center keeps locking things up through anti-virus and anti-spyware monituring and Bit Defender is on for it to not recognize (that is - I checked). Verification of reliability and said performance "setting up windows Security Center to stop monituring" them. How can I do this?
http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Security-Center
-
How to configure details WorkRepository to them in the console of the ODI. ?
Hello world
I freshly created some interfaces in ODI studio in two repositories named: WorkRep_1 and WorkRep_test and interface test_1 in WorkRep_1 and test_2 in WorkRep_test.
Yet after configured WorkRepositories in the Console of the ODI.WorkRep_1:
WORKREP_1 JDBC/odiMasterRepository SUPERVISOR JDBC/odiWorkRepository WorkRep_test:
WORKREP_Test JDBC/odiMasterRepository SUPERVISOR JDBC/odiWorkRepository I am getting same interface in two repositories when opened in console with different repositories, please help me.
Thank you
Shakur.
Hello
As you can see in both cases, you specified jdbc/odiWorkRepository as URL JNDI to work while you get connected to a deposit in both cases. If the steps you must follow to create Console ODI connections for two repositories:
1. create a new JNDI with the details of the schema of data base for WORKREP_Test, targeting for your managed server where you have deployed your odiconsole.
2. then, you configure a connection of repository odiconsole to WORKREP_Test mentioning the JNDI newly created for your WORKREP_Test.
Steps to create the new JNDI:
To create a JNDI, connect to the Weblogic administration Console > go to Services (on the left panel) > Data Sources
You will see the list of configured JNDI names already. You must add one more favorite JNDI for your schema repository work connection. You can reference existing repository work connection JNDI (odiWorkRepository) for the sample of the parameters values.
Thank you
Parag
-
I created a website with Muse - including a detailed form - for a client, but whenever the form is sent, and the client receives the information in an e-mail message, the 'From' field has my email. I tried to go into the form scripts and change all references to my email in the field "From" for a generic name (for example, the ABC survey), but the son come again with my email on them. Any suggestions?
that is controlled by your Business Catalyst account that actually handles the transformation of the form.
Mylenium
-
How can I control where a link displays the content
A first version of my site is http://www.awd4u.com/FPPA/. I still manage my footer, among other things.
The gray block (with hyperlinks link through the Link) and the white block (defined as an HTML article) are in a div with class = "row". The gray block has class = 'col-md-2', and the white block has class = "co-md-9. When the user clicks on a link, I want the file to load into the white block. This used to be easy with frames, but frames are old school now. The target property only points to _blank, _parent, _self, _top, or new. So I have difficulties to find a way to do this.
Your example site has nothing mysterious. Each link is directed to a separate URL (look at the address bar).
Learn how to use inclusions side server for your elements header, footer and of navigation at the site level. This will be the shortest work for you long term. I wrote a quick tutorial on Server-Side Includes below. Let me know if you have any questions.
ALT-Web Design & Publishing: Inclusions with PHP server-side
Nancy O.
Maybe you are looking for
-
To remove the search bar to see the beautiful snowmen snow
I can click between the search bars and URL to shorten to the left, but the right side of the search bar there where he was. I want to condense the two bars to the left so I can see the snowmen beautiful of my add-on. Or remove the search completely
-
I have a PC desktop to envy of wick. The display shows points as he is affected in several places AGAIN. This happened just as the previous edition of nowhere. It sits right on a table and I bring it with me (don't have also any children that might b
-
I cannot connect to the internet and can not find networks as well.
Original title: a disc XP Wibdows will repair a missing msnuser file? I can't find all the networks to connect to the internet. After a router problem, I had to change the name of my network. All my other PC is connected. My Dell XP Pro has for some
-
Canon MP 730 printer all-in-one more no signal my TX1000 HP pav. Entertainment Notebook PC
I have a Canon MP730 while a printer, a desk, a HP Pavilion Entertainment PC tx1000 laptop, a Wireless Linksys router. The linksys wireless router is connected to the internet, the desktop computer is connected to the linksys, the printer is connecte
-
Meeting place 7130 Intel Smart Connect agent technology is not running
I have a GT 7130 with an i-4300Y processor and a 256GB SSD LiteOn and 8 GB of RAM I was a symbol of exclamation flashing in notification on Smart Connect drawer. I click it and it says that intel Smart Connect technology Agent does not run I tried to