How to configure ICS in network wired (Ethernet LAN) mixed (some XP some 7 64bits)

We have an ethernet network.  A high speed printer.  Two towers XP (wireless).  A windows7 PC.  Currently, the windows7 pc is a laptop which has wireless capability.  However, we have NOT a wireless router. So don't give me responses bulletins on wireless connectivity.

We use Internet connection sharing.  Somehow it just stopped working.  Do not know whether to blame a windows update or what.  We have probably messed up the worst configuration still try to get it working again. So I think that we must all start over and set up from ground zero.

There is a technical bulletin, with simple (for beginners) instructions on how to configure ICS in a mixed network?  The instructions must be combined with the following configuration:

Our host PC is XP.  We cannot change that, then give me all solutions where the pc windows7 is the host

A customer is XP.

A customer is windows7.

We don't need to share files, just the printer.

Hello

The question you posted would be better suited in the technet Forums social. I recommend you to send your request in the below link:

http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

Tags: Windows

Similar Questions

  • How to configure windows storage networks

    I bought a HP NAS storage. It is preloaded with windows storage Server 2008. Please let me know how to configure

    Hi Alexolickan,

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet Windows Server forum.

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

    I hope this helps.

  • How to configure the private network interface between two VMS os invited using red hat linux

    Hello:

    I'm trying to set up a Real Application Cluster on my home office so that I can install Oracle 11 g RAC which is a facility where you have two servers accessing the same shared of storage (chipboard).

    In addition they will have a network interface private and a public network interface, so it will be for public interface eth0 and eth1 for interconnection of private networks.

    I read that I can set up using VMWare server, create Virtual Machines and install the operating system invited to them.

    I intend to install Red Hat Linux guest OS.

    My question is basically, how can I do for the establishment of the private network eth1, will be the guest OS to automatically install the sense (do I need to have 2 NIC cards for this), or where and how can this be configured?

    Also, how these two speeches of Virtual Machines to another on the private interconnect?

    And is it possible to use DHCP or do I need to add the IP addresses manually?

    Very grateful for your contribution to this topic, thank you.

    Kind regards

    Sam

    You can have network private without assigning a NIC cards (adapt).

    Hope this helps

  • How to configure the host network to pass

    Hi all

    We do the VLANS on our ESXi hosts and would like to have traffic flows VLAN on our physical network as well.  In doing so, I'm curious of what should be the "correct" configuration for the connection between the physical host and the switch.  You do you enable trunking ports or leave the port with the default configuration?

    Thank you!

    -ToTheCloud

    You do you enable trunking ports or leave the port with the default configuration?

    Assuming that you are talking about Cisco switches, then set up the ports on the switch as junction ports. For other providers, it is named marked ports. In any case, the common name for this is to 802. 1 q (dot1q). Please take a look at http://kb.vmware.com/kb/1004074 for an example of configuration.

    André

    Post edited by: a.p. - corrected link

  • How to configure map physical NETWORK on the trunk on an ESXi Server

    I have a Server Setup ESXi and I want to be able to have virtual machines in different VLANS. I have set up my Cisco port to the trunk. I can't find where I put the physical NETWORK adapter on my ESXi on the trunk. Is this possible in the ESXi? Once I have set up on the side of Cisco, I lose connectivity to the virtual computer because the NIC ESXi is not trunking.

    There are a few things that you must be aware.  If your vlan native is not network management vlan that you will need to label the management network to the vlan in ESXi.  You attach VLAN to trade.  The management network is essentially a GROUP of ports in order to entrust a vlan, you will have to go to configuration-> network-> and click Properties to the vSwitch i.e. on the management network.  Usually vSwitch0.  In there, you can then click on the network of Managment and edit and assign a vlan.

    In addition, if you want to have multiple attached networks to some VLAN different, you'll need create a portgroup to each of them and assign a vlan to each.

    SID Smith

    -

  • How can I find my "network security key?

    Hello world...

    I am a netbook which is preloaded with windows 7 starter. My PC is 64-bit windows vista ultimate. I have an ADSL router that is connected to the computer with a network cable (yellow) - internet works fine.

    I'm trying to connect my netbook to the wireless router, and the netbook from asking a "network security key.

    Where exactly can I find it? I can't find that whatever this is named network security key to my router settings...

    Thank you very much!!

    The wireless security key is in the settings of your router. See below for how to configure a wireless network in complete safety. It will also cover where you will find these settings.

    Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

    http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

    This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

    Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

    Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

    Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

    At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

    Excellent guide for setting up of a wireless network, with images - http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

    MS - MVP - Elephant Boy computers - don't panic!

  • How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

    Hello

    I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

    On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

    Internet access requires a wireless network connection.

    These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

    How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

    Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

    Disable DHCP on the Dovado or use a cable between the PC and the laptop.

    Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

    IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

    The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

    Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

    This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

    Basic information about ICS are HERE

    Manuals for the Dovado HERE

  • Adjustment to the high network roaming in condo wired Ethernet (no Modem)

    HI - our condo has one Ethernet Jack in every room with the signal directly from the building router. The IP address is unique for all the outlets in our condo.

    In my office, I have a cable of the Time Capsule to taking Ethernet to my office. I have other devices connected to the TC, so he needs to stay there. Unfortunately, it is not very centrally located in our condo.

    In our room, the signal often falls because it is the longest distance in our condo to the TC. But... we have an ethernet jack in our room.

    So I bought an AirPort Express, but the installation seems to really push "extended network" wireless. Because the signal is somehow in our room, it is unnecessary to EI in there. So I set to halfway between the two. On the floor, not in a large space.

    I would like to set up a 'of roaming network', but I can't seem to reproduce the screen shot in these instructions:

    Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

    But, in addition, their illustrations make it look like the AE should be wired in the TC.

    I tried using the WAN of AE port, but that didn't do it.

    Is this possible? Any direction would be great. Of course, I want the effect of the '1 network for our entire condo' and not switching WiFi networks for different parts of the housing.

    Thank you!

    Jon

    So I bought an AirPort Express, but the installation seems to really push "extended network" wireless.

    This happens when the Ethernet connection is not working, or you did not the Ethernet connection before trying to implement the Express. Use a short piece of spare Ethernet cable... any length will do... to connect the Express to the time Capsule to implement the Express in this way. After setting the Express up to... Move the Express at the remote location and the Ethernet connection it.

    If it doesn't work there, then you know that the Ethernet port or cable is not working properly.

    I would like to set up a 'of roaming network', but I can't seem to reproduce the screen shot in these instructions:

    Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

    Unfortunately, these instructions are 4 years and more, so the General information of the document is good, the specificities of 'how to' would not be used. Instead, you use Apple 'Installation Wizard', which literally did almost everything for you automatically on the installer.

    After the back if you need some advice.

  • Install the software not found on my OfficeJet Pro 8000 wired Ethernet network

    I'm trying to reinstall an OfficeJet Pro 8000 on my wired ethernet network using the 'minimum' driver install.  My PC is Windows 7 Pro (32 bit).  I have the printer configured with a static IP address, I can successfully ping and accessing the Web page printers via the IP address.  I have uninstalled the HP 8000 software using the two installation software "uninstall" and you run the HP removal utility and have restarted the PC.  I disabled my firewall ZoneAlarm and AV/AS software for installation.

    During the resettlement process, when the software is looking for network printer, it cannont find the printer on the network, despite the fact that I can ping the printer directly and access its Web page via IE.  Using the advanced search and entering the IP address of the printer does nothing.  I'm at the end of my ideas on what to try (I said this whole process about 3 times now with the same results!).  What Miss me?

    Thank you

    Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

    What did he say?

  • Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

    I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

    The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

    It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

    I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

    Thanks for your help.

    Thank you for your help.

    The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
    The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
    Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
    I would like your ideas on the potential problem of Windows 7 found on Google.
    Thanks again for your help.
    Bill
  • How can I configure my wifi network to the big house?

    We are in a House floor (including basement) large 4 4500 square feet.

    Internet comes home in the basement.

    From there I push a switch that distributes internet cable throughout the House.

    Everyone has now 15 years later, wireless devices.

    I have 5 Airport extreme, what is my best option to implement?

    I want to have the name of a network and a password.

    I would like to be able to move anywhere in the House and have internet without needing to connect to different networks.

    Any help would be greatly appreciated!

    It is the standard of roaming network.

    Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

    Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

    Apple does not seem to have a newer version... in order to take the principles that are simple.

    Æ all have a simple base station name... I recommend names that are short without space and pure alphanumeric for everything... not to use apple recommended names in the utility.

    If you have AE1 - AE5.

    All units to create a wireless network... (More.. important to create not extend).

    for example AEwifi

    All units are configured with WPA2 Personal security and use same pure alphanumeric past 8 to 20 characters.

    All devices are set to fill mode, except maybe the main unit being used as DHCP and NAT router.

    Plug in ethernet in the appropriate floor and location.

    You now have a roaming network... It works great to move home with laptops... It may work less well with phones and ipads... It's Apple's fault for not allowing the device swap "tours" like on the side of the 3 G... You may need to turn on/off the wireless. I hope that one of these days the problem will be corrected.

  • Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Hi stuckfree,

    The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  • My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

    Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

    Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

    data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

    for the data. Also, perhaps the home page of IP camera offers software/drivers.

  • How to configure a network printer and network drive in Windows 7?

    * Original title: cohen * address email is removed from the privacy *.

    having trouble mapping.  naming and configuration of a network in windows 7 pro drive. I am connected via a wireless network and also try to use my jet of office of hp as a network printer I need to know how configure that as well

    Hello

    I would like you to check out the links and check if it helps the network configuration and the network printer.

    http://Windows.Microsoft.com/en-CA/Windows/create-shortcut-map-network-drive#1TC=Windows-7

    http://Windows.Microsoft.com/en-CA/Windows/install-printer-home-network#1TC=Windows-7

    http://Windows.Microsoft.com/en-CA/Windows/install-printer#install-printer=Windows-7

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. If you have any questions, please let us know.

  • How to configure the network adapter when you run ESXi on VmWare workstation?

    How to configure the network card installing ESXi on VmWare workstation 6.0.0?

    These are the options: I tried bridged, host-only NAP.  None of them works

    Network Setting Option.PNGNo Network Adapter.PNG

    What Miss me? driver or adapater?

    I'm running on vmware workstation on Windows 7 with Lenovo laptop.

    in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

    If please have 4 GB of RAM and re-run Setup. you will get through.

    message about the network card should also not appear after that. What kind of network you choose depends on your need.

Maybe you are looking for

  • HP 1050a printer has no action the printer

    I use printer 1050A printing fades. I am trying to clean the heads and to see the ink levels, but I have no printer hp "action of the printer. I used the updates but still nothing. No maintenance task, no printertoolbox. What can I do? Is there a dri

  • Disappearance of images

    I have recently had (and still have) problems with pictures of my files just high and those who disappear. I don't know how but I tried searching everywhere on my computer to find them and they are not found. My computer is a shared family computer.

  • Bad Image C:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an error

    Hey,.Everytime I open an application I get the following messageC:\windows\system32\WTSAPI32.dll is not designed to run on Windows or it contains an errorThe program of all the work after clicking on okThis has happened since my last update automatic

  • Location of automatic restore Points?

    Can someone tell me where the automatic restore points are stored on XP & Windows 7? I know that if I put a manually restore point, I define the location.

  • None of my direct email is displayed on my old computer but appears on my new.

    Where can I find basic instructions Where can I find the instructions to work this thing that do not assume I knew XP as a Boffin? All the videos seem to start with, "you know how previously you blah blah ' and I think that no, I didn't know that. I