How to configure isa server 2006
How to configure isa server 2006
How to configure ISA Server 2006
Carey Frisch
Tags: Windows
Similar Questions
-
I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?
Hello
Your question is beyond the scope of these forums.
Please use the following links for that matter.
Network Infrastructure servers Forum:
http://social.technet.Microsoft.com/forums/EU/winserverNIS/threadsCategory of the Windows Server:
http://social.technet.Microsoft.com/forums/EU/category/WindowsServerConcerning
-
With ISA Server 2006 on VMWare ESXi
Hello
I installed isa server 2006 on a vmware esxi, server is the Server Blade HP Proliant dl380 G5 with 2 NIC the 1st network adapter, the ip address is 10.10.1.42, and it will be the external ip address because it is connected to the firewall with internet. The 2nd NIC ip is 10.10.1.43 and this is the only internally. I tried to test the connection to the isa by creating a rule to ping of localhost (isa) in-house, but it failed.
I wanted to just my isa to be a web proxy, but from what I've read on some forums, I can not install isa on vmware? Can someone help me? Thank you.
If you are running firewall ISA in ESXi host. It is doable. I guess it will be a unique Web cache system (no Firewall Advanced)
This can be done on a unihomed Server (NETWORK card)
Check
-
I just installed ISA server 2006 and ISA ISA server client not found what I need to do?
I just installed ISA server 2006 and ISA ISA server client not found what I need to do?
Hello
I suggest you to report the problem in the TechNet Forums to better support on the issue.
http://social.technet.Microsoft.com/forums/en-us/category/forefront
-
How to configure vCenter Server with an external smtp server?
Is it possible to configure vCentere Server with an external smtp server?
In our environment, we must configure vCenter server to send email alerts when the alarms are triggered. We use the google apps (smtp.gmail.com) server as our official email server.
I know the steps to do the same?
You must authenticate external messages. Here is one of this tutorial. http://paulgrevink.WordPress.com/2011/02/06/configuring-vCenter-for-email-with-SMTP-authentication/
-
How to configure Windows server 2008 r2
Dear Sir.
I installed windows server 2008r2, now I have to configure it.how to install and configure active directory, dhcp, dns.so please help me.Sumeet Subhedar Hello,
The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
TechNet - Windows Server
Thank you -
ADF Logger | How to configure Weblogic Server
Hi all
I use JDev 12 c and weblogic server 10.3.
I have configured the recorder in my local, using logging.xml and print newspapers in specific file. which works fine locally.
Now, I have to implement the same stand-alone weblogic Server (production).
I understand that by the link below is, I'll have logging.xml in the server as well and I have to configure the same setting in weblogic server.
But I don't see any of the weblogic server logging.xml file.
Please suggest how can I implement the same in weblogic server.
Thank you
Vieira
Please find below some notes on how to tune your record using Enterprise Manager on a stand-alone Weblogic Server:
ACTIVATION DEACTIVATION of Weblogic logging useless for Production using Enterprise Manager
-
How to configure the server Esxi 3.5 on Vmware workstation 7
Hello
I m new technology Vmware Esxi. I will join the formation of VCP5 next month. But before participating in this training, I would take it somewhere on the same experience. So, for this, I install Vmware workstation 7 on my home PC. I have install Esxi 3.5 server on one machine virtual workstation.
I just edit the machine configuration file virtual vmware [C:\Documents and Settings\a48923\My Documents\My Machines\Esxi virtual-01] as shown below which is marked in "BOLD" letter.
scsi0. Present = 'TRUE '.
scsi0.virtualDev = "free".
memsize = "1024".
scsi0:0. Present = 'TRUE '.
scsi0:0. FileName = 'Esxi - 01.vmdk.
IDE1:0. Present = 'TRUE '.
IDE1:0. AutoDetect = 'TRUE '.
IDE1:0. DeviceType = "cdrom-raw"
floppy0.startConnected = "FALSE".
floppy0. FileName = "".
floppy0. AutoDetect = 'TRUE '.
ethernet0. Present = 'TRUE '.ethernet0.virtualDev = "vlance.
ethernet0. ConnectionType = "bridge".monitor_control.restrict_backdoor = TRUE
monitor_control.vt32 = TRUE
Monitor.virtual_exec = "automatic".ethernet0.wakeOnPcktRcv = "FALSE".
ethernet0. AddressType = 'generated '.
roamingVM.exitBehavior = 'go '.
displayName = "Esxi-01.
guestOS = "redhat".
NVRAM = "Esxi - 01.nvram.
virtualHW.productCompatibility = "esx".
extendedConfigFile = 'Esxi - 01.vmxf.
ethernet0.generatedAddress = "00: 0C: 29:32:f8:b3.
UUID. Location = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
UUID. BIOS = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
cleanShutdown = 'TRUE '.
Replay.Supported = 'TRUE '.
Replay.FileName = «»
scsi0:0. Redo = «»
vmotion.checkpointFBSize = "16777216.
ethernet0.generatedAddressOffset = '0 '.
tools.remindInstall = 'TRUE '.
ethernet0.linkStatePropagation.enable = "FALSE".
tools.syncTime = "FALSE".
ethernet0.VNET = "VMnet8.After you change the configuration file. I started the Esxi server. But when booting, it shows lmdriver failed to load. When I tried to configure the Exsi network, the back always prompt to reset the default settings of the network. Then I searched the internet, I found this machine NIC not to support Esxi. Is there a way to configure the Microsoft loop back adopter or any virtual adopter for esxi? So that I can install several esxi server on a single machine on vmware workstation and can be communicate with each other.
With VMware Workstation 7 you should not need to manually configure the .vmx file. Create a new custom virtual machine and select ESX as the guest operating system. This will configure the virtual material suitable as an E1000 network adapter...
André
-
Installation and configuration of ISA Server under ESX
Hello
What are the requirements to install ISA server under ESX?
And I need 3 physical network adapters? Or can I use only 2?
I am looking for a document that tells me how to configure ISA under ESX.
Thank you.
It depends on the role of the ISA.
3-branch network you need at least 3 ESX physical network cards to ensure a physical traffic isolation.
---
VMware vExpert 2009
-
I have an isa Server 2006
I want to use the vpn connection and and limit internet access bandwidth:
1. suggest a pdf for learning about this
2 - to use web isa management utility which port should I use?Ask in the forum ISA Server:
http://social.technet.Microsoft.com/forums/en-us/Forefrontedgegeneral/threads
-
Help. How to configure Thunderbird to receive both my email accounts that are through a server?
It seems that it works if you are wanting to have more than one 'account '.
HOWEVER, I wanted to add a 4th e-mail address 3 I already had and worked very well. That of what I did and voila! It worked. It is the path: Tools-> Options-> Security-> passwords-> Saved going on-> show passwords go there and keep it open while you
try to send an email from your new address. A message appears saying that password has failed, I had to insert a password. While information appears automatically in the list on the chart you have open. Of course you need to add this new email address to your list first. -
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
How to configure the LDAP connector in windows server 2012 R2 Active Directory?
Hello
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
How to configure a FTP server and the web and integrate with 5.2 DMM
Hi all...
I need to set up an external server only for publishing content to reduce the overhead of the DMM server.
can someone guide me on how to configure the external server and it intergrate with the DMM 5.2
Thank you
semuthu,
Notes from the Release Notes:
Limitations of compatibility with Microsoft Internet Information Server (IIS)
DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.
This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but
want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.
I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.
There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.
Using Apache with Microsoft Windows
http://httpd.Apache.org/docs/2.0/platform/Windows.html
Quick HOWTO: Ch20: Apache Web Server
_ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server
Once the Web server is configured and operational. You simply record your multimedia content on the Web server
and then have your DMS assets in the library using an external URL address for its location.
If you want to use the external server for other features in the DMM, you can see how to set up
here:
Goto the section just below the CNSC & WAAS...
If this answers your question, take the time to mark this
discussion answered & rate the answer.
Thank you!
T.
-
How can I configure network server in blackberry phones smart blackBerry bold 9700
How can I configure network server in blackberry bold 9700
I want that my third-party applications to access the organization intranet using your organization's network.
When I tried to change the permissions of third-party application, it shows RIMconnections, interactions, data from the user... don't allow, deny permission is there.
How can I set thesehttp://docs.blackberry.com/en/smartphone_users/deliverables/23895/Third_party_application_connection...
Yes, if you read the link you posted, these settings are for OS6 and higher devices.
Not for OS5 and you're on OS5.
-
How to configure Gemfire mode client/server with external supplier of XA transactions
Hello
I would like to have a transaction between the operations of Gemfire and WebSphere MQ using Atomikos as XA transaction manager.
The documentation is rather evasive about how to configure Gemfire with an external transaction manager when using a client/server Gemfire deployment.
Any help appreciated.
Thank you!
Unfortunately the Atomikos is not supported. Please see this thread for more information: GemFire and Atomikos in tcServer
-Jens
Maybe you are looking for
-
is anyone having problems with the debenhams site when accessed from an iPad?
I can't select sizes, etc. When I go to debenhams site from my iPad 2. In addition, items disappear from my basket once they have been added & new items disappear from the "saved" so box. I was wondering if anyone else may be faced with a similar pro
-
How to recover the Satellite L305D without recovery disk?
Hey guys I bought my Toshiba Satellite L305D half a month ago and now my computer works do not.So I m thinking about restoring my laptop when I bought it first, but you know when I bought it, it doesn t come with any disk recovery so I put t know wha
-
Tracing of data vs. time in Excel
Hello community, My question seems pretty simple: I would like to draw (not in a graph, regular values just next to each other) collected data vs the time they were acquired. My problem is that I take my samples one at a time, creating 1 d-data and t
-
Necessary details: Operating system: Windows 7 Professional 64 - bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)Language: English (regional setting: English)Manufacturer: Hewlett-PackardModel: HP Pavilion Notebook PC (g6-1212sx) g6Product: A3S45EA
-
I have Windows Vista Home premium and you want to reduce the screen horizontally, I hope someone is able to help, I am only a user and the old, which means not grew up with computers. The display is drawn a little horizontal, google clock is wrong as