How to configure PXI-8464 to use the channel API

I have a PXI-8464, but I don't know how to set up so that I can access block API of ways.

Normally, I can choose the NPC channel by selecting "CAN0". For example, I can do it to the MAX:

Then I can, just select "CAN0" in VI:

However, on my remote system, it looks like this to the MAX:

Notice how there is no "CAN1" or anything like that. Therefore, in the VI, it has a long list of channels CAN, but none of them can be used to connect to my channel PXI-8464.

How do I get my CAN map to work? Thank you.

Hi Bladhart,

You have configured the NPC card via MAX for the RT system?

Here is a link that might help!

Configuration of a real-time Application of NI-CAN to the MAX

http://digital.NI.com/public.nsf/allkb/D2D8B947369F453986256F89006F40B0

Thank you!

Tags: NI Hardware

Similar Questions

  • How to configure vswitch security policy using the API?

    Hello world

    Does anyone know how to set up a vswitch on ESXi Server security policy by using the management API (the idea is to do this in a script)?

    I think specifically the macchange and forgedxmit parameters which are set to true by default, and I want to change false.  Note that I also need a way to control the value from a script.

    I used to do with vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-macchange = false vSwitchn and vmware-vim-cmd hostsvc/net/vswitch_setpolicy-securepolicy-forgedxmit = false vSwitchn in the ESX 3.x service console, but I'll try (unsuccessfully so far) to find an equivalent using RCLI or Powershell (I don't want to enable ssh on my ESXi and use vim - cmd as I want to be able to do remote securely.

    Ideally, it would work while the host is in active locking mode (so I only need to authenticate on my server vCenter).

    Advice would be appreciated.

    See you soon,.

    Stéphane

    To update the security policy, you will need to watch the HostNetworkSecurityPolicy : http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.NetworkPolicy.SecurityPolicy.html#allowPromiscuous

    You'll want to access the vSwitch you are interested using the following:

    [hostSystem->-> networkSystem configManager - >-> vSwitch networkConfig]

    Once the reference to the vSwitch, you'll want to create HostVirtualSwitchConfig spec: changes to http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.VirtualSwitch.Config.html or policies make-> security which will contain (allowPromiscuous, forgedTransmits, macChanges) for changes that are just Boolean parameters.

    =========================================================================

    William Lam

    VMware vExpert 2009

    Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

    http://Twitter.com/lamw

    If you find this information useful, please give points to "correct" or "useful".

  • How to configure proxy services to use the file transport?

    Hello

    I configured a proxy service to query for files in the specified folder. And it is configured to use the file transport.

    While running, I get the exception - follwing


    < 27 April 2012 4:08:28 PM GMT + 05:30 > < error > < WliSbTransports > < BEA-381602 > < error has occurred during the elections of the ProxyService service endpoint resource $ ServiceTypes_SB$ BinaryService: javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
    javax.naming.NameNotFoundException: while trying to search for "wlsb.internal.transport.task.queue.file" did not find subcontext "wlsb. Solved "; other name "wlsb/internal/transport/task/queue / '.
    at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
    at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
    at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
    at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
    at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
    Truncated. check the log file full stacktrace

    Ask for help to solve this problem.

    Thanks in advance.

    Concerning
    Shyam.V

    Internal JMS queues depends on OSB are not there for some reason any.

    Are all correctly target JMS servers?

    How did you create the domain and all the managed servers are started?

  • How to set an application built using the C API for myRIO 3.0 to run when starting on a myRIO-1900

    It is even possible to define such an application to run at startup? If so how would you do it?

    I've compiled a program using the API and eclipse distribution OR and can run Eclipse or by running while SSH in the myRIO. Is the only document I could find about this one: http://digital.ni.com/public.nsf/websearch/B37FA04A1CB84B6C862571A30060EF03?opendocument&Submitted&&...

    The link is a little outdated, so I'm not sure of the relevance, it is today. I changed the lines of lvrt.conf to:

    RTTarget.ApplicationPath=/c/ni-rt/startup/startup.rtexe
    RTTarget.LaunchAppAtBoot = True

    None of the settings seem to do anything. I also tried to run the program as a script using rc.local which does not seem to be used in the same way as it is in Ubuntu. My compiled pogram does not include the .rtexe extension although I can add it later that might not be the same.

    I made sure that startup programs 'disable' has been disabled on the Server Web myRIO.

    Thank you

    Just in case someone has a similar question:

    https://decibel.NI.com/content/message/144527#144527

  • How to check for charts grouped using the FrameMaker API?

    I have a page with bundled graphics frame and also other graphic objects that are not consolidated or are grouped into a different set. How can I check if all the objects in an image are grouped in one package?

    Michael is correct. Specifically, the graphics have a FP_GroupParent property, which returns the ID of the FO_Group object that the graphic is in (if any). If the graph is not grouped, I believe that this property returns a value of zero. Thus, all graphics within a group will have the same value for FP_GroupParent.

    Note that you can combine both groups, which then makes things much more complicated. A FO_Group object also has a FP_GroupParent property that theoretically allows an unlimited amount of group nesting. I hope that you don't have to deal with that.

    Russ

  • URG: How can I force APEX to use the specific schema: spaces of work APEX_040100 or entitled to another schema?

    Hi all

    Here's the scenario:

    1. My computer crashed. were to return to complete export (expdp 11.2.x to impdp 12 c). successfully done.
    2. Configured ADR blah blah... can access the admin of the apex.
    3. Problem is: administration interface does not SEE my workspaces apex Apex (only the workspace IN-HOUSE).
    4. After investigation it seems that APEX (after the upgrade) is somehow configured / run with: schema APEX_040200 and not

    APEX_040100 (as I have improved Apex in the old database versions).


    5. If I'm running the following:

    ALTER session set current_schema = APEX_040100;

    Select short_name, display_name

    of wwv_flow_companies

    where source_identifier is not null;


    I SEE all my beloved workspaces.

    6 my questions:

    a. How can I force APEX to use the specific schema: APEX_040100 instead of APEX_040200?

    b. or are there other alternatives to assign these workspaces in the current environment?


    Concerning

    Etay G

    Hello Brad,

    Thank you for your response. Appreciated.

    • Yet, as I had a little corrupted environment Apex after import (impdp), COMPREHENSIVE database this method of revocation (above) has failed several times to me.
    • Here's what I have (solves the problem):
    • Deleted APEX_040200 Apex 4.2 installation().
    • Text left in DB is the only APEX_040100
    • Then, the version 5.0.3 and it worked!

    More importantly, after the installation of APEX, all workspaces, users, etc. are automatically correctly resided in APEX.
    • I think that if you have only 1 version of apex corrupted in DB. It should work as well. Remove again, schema using the above script (check version) with caution (after backup, etc.).

    Kind regards

    Etay G

  • How to configure a user to use getManager() for sound manager in HumanTask

    Hello

    I have a simple AC.
    We create users and groups in weblogic and assign the task Participants using these users.

    I want to build a simple human task, which must obtain authorization from the Director.
    I don't want to assign the user statically, but I want funciton "user.getManager ()" allows you to assign a participant to the task on the 2nd level.
    To do this, the user must be mapped to a handler. But how can we do this?

    In weblogic-> security domains, I see only users and groups, but nowhere I see a Manager where I can assign orders to a Manager or a user to a card Manager.
    Can someone help me in this.

    Concerning
    RaviKiran

    Hi Ravi
    1. nothing beats a Manager configured separately in the weblogic console. Sound like that. Even the Manager is also one user that another user. The link looks like this. Each user will have standard properties such as firstName, lastName, Department, dateOfBirth, phone number, email etc etc. They also have an attribute as a Manager and the value of the present is just reference to another user. I hope you got the point.

    2. If, in the console Weblogic, say you create 2 users: weblogic1, weblogic2, weblogic3. And you can assign properties of base for each other like firstName, lastName, etc.. For weblogic1, assign the handler as weblogic2. To weblogic2 assign Manager as weblogic3 etc.

    3. now behind the screens in the Workflow, SOA, when you run user.getManager () and if the user is weblogic2, the value will be automatically weblogic2. And it lights up. You don't have to do any programming for it. The workflow will use the LDAP API to get the value for each standard property if they are named using standards such as firstName = givenName lastName = sn, emailId = mail etc etc. Here's all of the standard object properties for users, AD groups. Moreover, most of them apply to groups also in addition to users.

    Now, the real trick is, when you create new users in weblogic, you can specify firstname, lastname, mail etc. But to specify the Manager, for now, use this workaround given post below. Before submit you samples or explore SOA/BPM, create some accounts testuser in weblogic ldap integrated by default using app demo community seed (servlet). You can open this EAR and then the WAR and extract the .xml file and edit to add any substance you want.

    The link below should give you an idea more:
    Re: Kingdom is not met for the BPM app (See my answer)
    Re: Seeds Demo defective community

    Thank you
    Ravi Jegga

  • How to save a database to use the RMAN catalog using the OEM 11 g grid

    How to save a database to use the RMAN catalog using the OEM 11 g grid?

    ---------------------------------------------------------------------
    Enterprise Manager Version: 11.2.0.2

    See the availability tab, and then click 'Recovery catalog settings' under the Backup/Restore Configuration.

    Choose the option 'Use Recovery Catalog'. Click the 'Add Recovery Catalog' button to add the recovery catalog. And fill required fields like username, host, port, sid, etc..

    Talip Hakan Öztürk
    http://taliphakanozturken.WordPress.com/

  • How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page

    I just noticed that (in comparison to Internet Explorer): in IE, when you preferred a Web page, it uses the actual name of the Web page (for example, for this page, it would be "Ask a Question Firefox Help" as the name of the bookmark), but in Mozilla, it uses the URL as the name of the bookmark. I was wondering if it was possible to change my Mozilla settings so that it uses the name of the Web page as the bookmark name instead of the URL? I hope that everyone understands what I am getting? If anyone can help me, I would really appreciate it. Thank you.

    Firefox uses the tag title for the name of the newly saved bookmark.

    When I bookmark on this forum page I get this for the 'name' of the bookmark.

    How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page | Firefox Support Forum | Firefox help

  • 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

    How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

    can you please email me at [removed personal information]

  • My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

    My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

    < email published by host >

    It is illegal for a child from 6 years to create an Apple ID.

    You can take a date-genius bar with Apple and bring the original receipt Apple.

  • How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?

    How can I turn OFF any possibility of use of private browsing OR - how to set a password to use the private browsing?
    My children are free to use the internet - but I don't want them to be able to hide their internet activity to me.
    Thank you.

    Try this new extension - turn off private browsing:

    https://addons.Mozilla.org/en-us/Firefox/addon/disable-private-browsing/

    Ignore the review I did there on the 22nd, as both versions again, improving have been released during the 6 days and most of the articles I've written about have been fixed.

    Richie just needs to get to the function disable compensation no browsing history, who works at.

  • I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

    I'm unable to empty a jpg of the Trash because the element is used. How can I find what is using the element?

    option of command, escape on the keyboard and then on the force quit button for all applications listed

    then empty the trash

  • How to rename a directory by using the command prompt

    How can I rename a directory using the command prompt?  Say I want to change c:\Users\User c:\users\user utilisateur\Mes Documents documents.  How can I do this?

    I looked in Google.  Here's what I found.

    G:\data>mkdir dir1
    G:\data>dir /b
    dir1
    G:\data>rename dir1 dir2
    G:\data>dir /b
    dir2
    G:\data>What would I write for the data? And what would I write for b?
    
    C:\docs>ren c:\docs\1.txt 2.txt
    C:\docs>dir /b
    2.txtPlease give me an example.Rod Computer
    

    OK, I fixed it.  I did go in safe mode, go to documents, right-click on the file, select Properties, security, advanced, owner and change the owner.  And that's all.

    They don't call me computer Rod for nothing!

    Thank you

  • How to get distinct records by using the ListAgg OBIEE report function?

    Hi all

    I get a correct result as mentioned below. But I don't see duplicates in my result here, in my example, I get duplicate for the name of the employee 'Pat '. So how to get Distinct values by using the LISTAGG function?

    Data set of sample with the Department and its employees

    Service employee

    ----------      ----------

    Marketing Michael

    Pat of marketing

    Pat of marketing

    Pat of marketing

    Purchase of Den

    Purchase of Alexander

    Purchase of Shelli

    Purchase of Sigal

    Guy of purchase

    Purchase of Karen

    Using the ListAgg function, we can convert it to:

    Employees of the Department

    -----------     -------------------------------------

    Marketing of Pat, Pat, Pat, Michael

    Purchase of Sigal, Shelli, Karen, Guy, Den, Alexander

    I tried a lot of things, but I'm not able to understand how exactly this can be achieved, if anyone has any idea or suggestions please do share, thanks in advance.

    After much research, I found the solution & I want to share what he finds very useful, we can create SQL logic in the Advanced tab, as below and after you click Rescan, and then you will get your desired results.

    SELECT saw_0, Evaluate_Aggr T1.dept ("ListAgg(%1,'' & '') intra group (about 1%)") ("as long as VarChar (1000), T1.emp) saw_1 FROM)

    SELECT 'emp_dept '. "the Department dept,

    'emp_dept '. "' employee ' emp

    IN THE "DOMAIN".

    GROUP BY dept, emp

    ) T1 GROUP FROM T1.dept ORDER BY saw_0

    Also note here that we have good anti-aliasing for columns parent (ex: saw_0, saw_1), another by mistake oracle bi server.

Maybe you are looking for