How to configure SMTP settings to the 'SCAN to Email' function on the XEROX WorkCentre 3615 multifunction printer?

Separated from this thread.

Have another QUESTION of community, please can someone help me on how to configure the SMTP 'STEP by STEP' settings to "SCAN to Email" function on the XEROX WorkCentre 3615 multifunction printer? Where should I start? On the computer or the printer? I have gmail emails to serve 'FROM' and for people, I'll send scanned docs, what is better to use email, gmail, at & t, yahoo or so? Thank you in advance.

Hello

Please contact Microsoft Community.

Please confirm which email client do you use?

I suggest you refer to the article mentioned to implement a multifunction device or an application to send emails with Office 365 for reference:

https://TechNet.Microsoft.com/en-us/library/dn554323%28V=EXCHG.150%29.aspx?f=255&MSPPError=-2147217396

I hope this helps. Do not hesitate to contact again us for any technical assistance,

Tags: Windows

Similar Questions

  • the Xerox workcentre 3550 network printer status is not available

    Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.

    Hello

    That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
     
    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  • How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

    I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

    original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

    Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

    When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

  • How to configure Outlook to display the date, they come in too?

    Original title:

    Dating of incoming emails

    My incoming emails list the time they came.  How to configure Outlook to display the date, they come in too?

    Hello

    Thanks for posting that ask about the Microsoft Community.

    I understand that emails do not show the date on which they were received.

    Are you referring to Outlook.com or Microsoft Office Outlook?

    As Zigzag3143 mentioned previously, you should be able to see the dates of your emails received after 24 hours of arrival. If this function does not work for you, I suggest you check the following settings:

    1. View - this is located in the upper left corner of the Inbox pane, the parameters must be defined on all the.
    2. Reorganize by -this is found in the upper right of the Inbox pane, make sure that your emails are filed by Date.

    This should fix your emails in the order of their arrival and should provide the date next to the subject line, if the enamel is older than 24 hours.

    I hope this helps. Answer please if you need more help or have any other question about Windows and/or Outlook.com, we are here for you help.

  • How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

    How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

    See if a program was installed for him. Or use something like Skype / instant messaging program

  • How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat?

    How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)

    Hi anne-grethea26777033,.

    You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.

    Let us know if that helps.

    Concerning

    Sarojini

  • Can the 'scan to email' function work with Windows Vista?

    I would like to install the 'scan to email' function with my HP Pavilion dv4 laptop using Windows Vista.  Can it be done?  If so, how do I configure it?  Thank you.  Judy

    Thanks for your reply.  It turns out that I needed to download the Officejet 6500 Wireless on my PC software to operate.  I couldn't use the software that was already loaded laptop from my husband, who works in Windows 7.  If I had the software on my desktop computer, your instructions likely would have worked.  I appreciated you taking the time to answer.

    Judy

  • How to reset the 'Scan to email' function on my Brother printer?

    Original title: Brother scanner help!

    I am running XP and have a Brother MFC-790CW with Outlook 2010. When initially, I pressed "scan to e-mail", "installation" window allowed me to enter my name, as well as inbound and outbound pop mail address.  Unfortunately, I entered an incorrect inbound and outbound pop e-mail address and cannot return to this window to correct.  I tried to uninstall / reinstall and I always get an error of incorrect switch.  The Brother Control Center Configuration only allows me to have between Outlook Express and Outlook 2010. I have no other problem with the machine or my Outlook program.

    Any suggetsions?

    Have you updated your version of control center? The UI is different in v.3 and offers more options to make the changes that you are trying to do.

    'Scan to email' by default, microsoft outlook express. How to change.

    http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002600/000014/faq002614_000.html?reg=us&c=us&lang=en&prod=mfc790cw_all&cat=107

    Set up or change the setting in the Dunière control 2 or 3.

    http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002500/000061/faq002561_000.html?reg=us&c=us&lang=en&prod=mfc790cw_all&cat=107

  • How to configure my PC for the first and after

    Hello:

    I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

    Here is the configuration of my PC:

    -Motherboard: Asus P9X79 PRO

    -Processor: Intel Core i7 - 4820 K 3.7 Ghz

    -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

    -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

    -OS: Windows 7 Ultimate

    -Main hard disk: SSD SanDisk 256 GB SATA3

    I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

    Thank you very much!

    PC hardware is not bad... as it goes.

    What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

    This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

    The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

    However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

    Here is a link to Newegg to the referenced reader...

    http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

    Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

    So... maybe that would 'fix' your questions...

    Neil

  • How to configure webgate to use the form on different server login page?

    Hi all, I would really appreciate help with this please.

    OAM performs the authentication of the forms on IIS 6. Connection work well on my primary host.

    I now need to protect another IIS instance on a different server and have installed a web portal on this topic.

    How can I configure it to use the same login for this webgate form? Form: parameter must be relative not sure if this is possible.

    So, I copied the original form of the connection in the same relative position on the new server and tried, but concluded that the MESSAGE to the target/access/dummy is now is more caught by the webgate and so I get a 404, rather than a redirect to my page.

    Thank you very much

    Bernie

    Hi Bernie,

    The challenge parameter redirect in the authentication scheme is used for this. Put the server in this area (for example https://myauthserver.domain.com) and have the form: parameter against that server (for example, /public/loginform.html).

    Either way, on IIS you would put the action of the form to the webgate, for example /access/oblix/apps/webgate/bin/webgate.dll

    Kind regards
    Colin

  • How to configure jdeveloper 11 with the .dbc files?

    Hi all

    I am a new bie here. 4 jdeveloper 10, I can configure files .dbc to the setting of the project, while 4 jdeveloper 11, it's totally different. I can't find any place to set it up. How to configure the .dbc in jdeveloper 11?

    Kind regards
    Chelsea

    You cannot use jdev 11g for the development of the OFA...
    You must download the patch of jdeveloper on metalink to develop objects of the OFA.

    See this metalink note to find the correct version of jdeveloper, you need to download https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1

    Prasanna-

  • BlackBerry Z10 how to configure gmail so all the messages in the mailbox appears in the BB?

    I'm having a problem with my gmail sync on BB Z10. For some reason, only two or three last messages as shown in the hub-> Email.

    Is anyone know where should I look for to fix and to see all my gmail messages volume?

    Thanks in advance

    Strange indeed. So now, I would say that you remove then re-add, but remember to use the advanced configuration screen. During the process of account add, where it offers 'Add account' with 2 (maybe it can vary depending on the carrier) selections, the first being "Email, calendar and Contacts", instead of what to choose, tap the screen of the low 'Advanced' button and then click on the button to GMail. Be sure to use "m.google.com" for the "server address", '443' to the 'Port', ON SSL, VPN OFF and PUSH next. "Synchronize the calendar", you can choose (30 days maximum).

  • How to configure a port as the port of the server

    I'm new to UCSM,

    What are the steps for configuring a port in the ports of the server.

    Step 1 in the Navigation pane, click the Hardware tab.
    Step 2 tab in the equipment, develop interconnections > Fabric_Interconnect_Name > Module fixed >
    Unconfigured ports.
    Step 3, click on one or more ports under the Unconfigured Ports node.
    Step 4 slide the selected ports and drop them in the Ports of the server node.
    The ports are configured as server ports, removed from the list of ports configured and added to
    the Ports of the server node.

  • How to configure multiple clusters on the same machine.

    I'm trying to configure multiple clusters on the same set of machines. I put the name of the cluster and multiple cases IP addresses different for each cluster. However I am still in train and error stating:
    "This indicates that there are multiple clusters on this network, try to use network configurations that overlap.

    Isn't this possible? If it is possible, is it still possible that I need to tell the virtual machines that they belong to different groups?

    Thank you
    Jacob

    I put these lines in my script for starting a prod. For dev I REM out as below.

    REM set java_opts = % java_opts %-Dtangosol.coherence.clusteraddress=224.0.0.1
    REM set java_opts = % java_opts %-Dtangosol.coherence.clusterport=65432

    Andrew

  • HP OfficeJet Pro 8620: HP OfficeJet Pro 8620 Scan to Email function

    HP OfficeJet Pro 8620 is a great value for all the features it offers. "Scan to Email" was one of the reasons why I bought this printer. Even if I can do this fucntion work with my gmail and iCloud emails, I feel very uncomfortable in the provision of those emails of credentials while creating this function.

    (1) only the printer stores the name username/password encrypted?

    (2) EWS don't encrypt the password while it will send to the SMTP service?

    (3) HP provides SMTP service with connected HP or HP Support Forum's securities (this forum!). I'll feel more comfortable in the use name of user and password of HP for this service than GMail or Apple

    Your help is very appreciated.

    Hello

    If I remember correctly, the printer should offer to save the e-mail address in the address book during the scan to email, I have not any access to the printer properly to ensure that.

    In addition, to add the e-mail addresses to the address book, follow these steps:
    1. open the built-in web server (EWS) by clicking on the printer homepage (SAP software HP Officejet Pro 8620 or)

    by using the IP Address of the printer from your browser (click it Ethernet or the wireless icon on the bottom of the screen to see it.)
    2. on the scan tab, click address book.
    3. click on new to add a unique e-mail address.
    4. follow the on-screen instructions. The entry is added to the address book Email.

    You can add up to 15 email addresses.

Maybe you are looking for

  • Question on the slots of RAM on Satellite P200

    How to increase the ram to 2 GB (1 GB + 1 GB) to 4 GB?Satellite P200 has 4 slots and I add ram 1 gb + 1 gb for the unused slots, or only 2 slots and I need to replace the ram of 1 gb + 1 gb to 2 gb + 2 gb?

  • What should I install to control a scanner through a VI

    I have a PXI-5122 card in a chassis SMU-1071 connected to a PC with LabVIEW2014 installed. And it can work under the control panel front of the NOR-SCOPE. Now I would like to taste signals and save them in files repeatly. But I can't find the example

  • Netflix and some games go gray and black when I put the mouse on them.

    When I put the mouse on some games and all the netflix movies, they're going grey and black & wont allow to interact with anything in this area, what should I do?

  • can I open a SQL express database in SQL server express 2005 2012?

    Hello I have a database and it's in SQL express 2005 but because my windows 8 is not compatible with the installer, I have to install the latest installer from 2012. now, my problem is that I can't open it in the 2012 edition... What should I do?

  • Not first 2015.3 no audio in MOV files

    I have an existing project from 2015 first with MOV files in it. Everything was good in the world until that blasted creative cloud persistently told me to go to 2015.3 so I held. After the upgrade to the first 2015.3 decided not to move the audio in