How to configure the e-mail address of the form home and contact me form

Similar Questions

• How to configure the network home wiFi with dlink router

  I need to create a home network using the dlink WiFi router
  a computer with Vista and the second with XP
  can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
  I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
  Thank you very muche for your end of the patient cooperation
  in return, I give free cooking classes
  see you soon

  I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

  So I will give you information on doing both.

  Router - configure manually

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Networking

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  Vista - Start ORB > Search > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
  MS - MVP - Elephant Boy computers - don't panic!

• How to change an e-mail address of a form?

  Dear supporters of Dreamweaver,

  In the website of ive created ive put a form in the contact page.

  Normally when I select the button send, I can put in my email address [email protected] now I can't change anything.

  How can I change the address on my form to my email?

  It comes to the page. Thanks and greetings

  http://www.Dorff.nl/contact.html

  Unless you use a link "mailto" primitive, your form HTML post to a script on your server for processing of different formulas.  This script would be where you enter your e-mail address.

• After installing the package of added value: how to configure the keys 1 and 2

  Hello
  After a new update of added value package, I can't use the 1st and 2nd (model 6 buttons). Anyone know how to configure this 2 buttons.
  The path that is explaind Toshiba does not.
  Thanks in advance.

  What you can try is to start Support Button from Toshiba and reconfigure two buttons. If you don't find that this tool please let me know. I'll help you.

• JHeadstart - how to configure the form to be modal window in the style of table-form available?

  JHeadstart release 11.1.2 Relase

  When you use the Application JHeadstart Editor, I chose "table-form" style of layout for the field.

  Issue. When the field editing either way, by clicking on the edit button, which will be the user to the form, is it possible to have the form opens in a modal window?  If Yes, where and how configure this option?

  Summary: currently, the flow is as follows: field displays in a table.  The user clicks on the button Edit and screen refreshes the field in a form.  What I want is to have the form to be displayed as a modal window with the table in the background.

  Thank you.

  
  

  I think you could do this with 2 different versions of the JHS group.  A configured as 'table' and set up the other as a 'form '.  Then, add a groupLink item in the table to open the form in a modal popup.  (you might even be able to link the group to itself, but then you will need to do some adaptations to prevent it to generate the default table-form link)

• How to configure the form control

  I created my first site of BC, and need help. I use the default form, Check Out, which seems to be created dynamically because I do not see in my list of 'Pages '. I only have the standard gateway of PayPal, so I need to:

  1. block the choice of credit card, PayPal (etc.) for only PayPal

  2. reduce the choice of fields to the value default PayPal (will happen this automatically?)

  3. make the required address field so I can send a physical receipt.

  Does anyone know how to do this? I've been searching for centuries in the region of forms, without success.

  Thank you

  Greg

  To change the form control you go to Site Manager > Module models > Online Shop Layouts > registration - buy. Then simply delete or comment out payment types, you do not want to provide. A bit of html knowledge will be necessary here.

  In regards to address my billing address is automatically required. To use the address of the home for shipping and make it necessary, simply navigate to Site Manager > Web Forms > select online store purchase (if you have not created a custom form). Add address and make it necessary.

• How to configure the different VLANs (using the E3200)?

  Hello.

  I want to implement different VLANs (using the E3200) so that I can have two different networks that cannot access each other.

  The E3200 is connected to a modem for internet access.

  I would like that the two networks to access the internet.

  The only E3200 does support the creation of VLANs?

  If not, is there another way I can satisfy the requirement by using the single E3200 (using something else than VLANs)?

  At the end of the day, I think that I would need at least another router.

  Thus, for example,.

  Router a (E3200) is connected to the configuration / modem to DHCP with a rank 192.168.1.1/24 LAN IP address.

  Router B is connected to the router and Setup for DHCP by using a LAN IP range 192.168.2.1/24.

  This peripheral way connected to the router A should not have access to devices connected to router B and vice versa, correct?  For example, X device connected to the router cannot ping or browse files on the device is connected to router B and vice versa, correct?

  Do I need to configure anything else on router B?  For example, do I need the DNS configuration settings so that devices connected to router B can connect to the internet without problem?  Do I need to specify that these VLANs are not bridged and which router, or both?

  I already know how to configure a static IP address, DHCP, beaches LAN IP and static DNS settings on a router, etc.

  With respect to wireless devices, I think that they would follow the same model; for devices connected to the router wireless (E3200) have access to other devices Wi-wired and connected to the router, but not to devices with or without wire, connected to router B and vice versa.  However, if the wireless devices have currently access to wired devices was also connected to the router, so it's good for now.

  Thank you very much!

  -Rami

  The E3200 has no support VLAN according to the manual. There is no way to configure two separate networks with this single router.

  You need to add network electronics.

  Ex:

  Managed with VLAN switch

  Another wireless router with VLAN

  If your modem provides several public or private IP addresses, then you could put a switch after the modem and two wireless routers that are attached to the switch.

• How to add images to my table and how to configure the Web site? Help, please

  I do not understand how to configure the Web site and add images to a table and make hyperlinks.

  First, set the folder of your Local Site saying DW where to save the files on your local hard drive.  Go to Site > new Site.

  I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.

  Go to file > new > (Starter models > models Bootstrap). Select one:

  • Bootstrap-Agency
  • Bootstrap-eCommerce
  • Bootstrap-Portfolio
  • Bootstrap-product
  • Bootstrap-real estate
  • Bootstrap-curriculum vitae

  Press the button create.

  For pictures, go to insert > Image. Select an image and save it in the folder of your local site.

  Nancy O.

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please

  Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please

  Even if the e-mail account is closed the Apple is still valid. If he has forgotten the password, see: If you forgot your Apple ID - Apple Support password

  What follows has instructions on how to change the e-mail address he serves his Apple ID: change your Apple - Apple Support ID

• How to remove an e-mail address of my computer?

  How to remove an e-mail address of my computer

  original title: remove e-mail account

  Go to tools | Accounts and you will see the account listed.  Highlight it, and then choose Remove.

  Otherwise, you need to explain more clearly and specifically.

  Steve

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140