How to configure the logo screen of handguns to several domain user time?

Similar Questions

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• How to disable the Welcome screen in windows 7 Home premium

  original title: disabling the welcome in Windows7 home premium screen.

  How to disable the Welcome screen in windows 7 Home premium. Therefore, type the user name and password when connecting

  Hello

  1. If you have Windows 7 Professional or ultimate edition, open the Group Policy Editor and navigate to the following policy.

  Computer Configuration / Windows Settings / Security Settings / Local political / Security Options.

  In the right pane, double-click the policy:

  Interactive logon: do not display last user name - change to "Enabled".

  2. If you have the Home Premium version, you can set this policy using the registry.

  * Make sure that you back up the key before making changes

  Open Regedit and navigate to the following location.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  In the right pane, locate the dontdisplaylastusername value. Double-click this value and change the value to 1 data. Click OK.

  If this value is not present, right-click and select new/DWORD (32-bit) Value.

  Name the dontdisplaylastusername (respect for case-sensitive) value, and then make the above change.

  Here is a screenshot of the login window.

  http://i196.Photobucket.com/albums/aa86/rvmv/ManualLogOn.jpg

  Let us know the results.

  Concerning

• How to remove the logo from the Oracle of tableFirstTemplate?

  How to remove the logo from the Oracle of tableFirstTemplate?

  Dear aJohny!

  My worm jdeveloper is 12.1.3.0.0.

  For Jdeveloper code would be

  and the screen would be like this

  

  I think it's the correct process and the best answer to my question

  Concerning

• iOS 10 update failed iPhone 6 now frozen on the Logo screen

  I connected my iPhone 6 (he was stuck in endless loop Recovery Mode with closed force) to iTunes and tried to update to iOS 10. After about 20 minutes, the update failed. Now my phone is frozen on the Logo screen with the loading of updated under him bar. Force restart it brings back me to the screen in recovery mode.

  I also tried to use another cord, restarted my computer, update iTunes... nothing seems to work. I tried this several times in the last 36 hours with ZERO luck.

  MY camera got in as recovery mode well once completed the download of ios 10 on itunes.

  I had to unplug my phone and plug it in again... Make sure that all drivers are up-to-date. attention to any message of warning or error code filling on your itunes.

  ITunes and the computer must be updated. the cable must be the original.

  Although I made a backup, recovery mode was not something I wanted. It worked for me, once I followed this step.

  Install the latest version of iTunes. (12.5.1.21)

  1. Restart your computer.
  2. Automatically search for updates of your Mac or PC. If you restart your computer for an update, check the updates again after the reboot.
  3. Strength of your unit to restart. ()When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device. If the download takes more than 15 minutes and the device out of recovery mode, let the download is finished, then repeat these steps.)

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch - Apple Support

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• How to use the Print Screen function?

  I've seen various descriptions of how to use the print screen function.

  It would be nice to actually tell one that works.  None have worked for me.

  [Fn] and Prt SCr does not work.

  CTRL and Prt SCr does not work.

  CTRL, Alt, and Prt SCr does not work.

  [Fn], Ctrl and Prt SCr does not work.

  If anyone knows the correct method to activate the screen capture function which would be a good thing.

  From the looks of things, HP has a big problem with this function.

  Here's a microsoft articleon the use of the screenshot function.

  This should answer your questions.

  Thanks for taking a peek.

• Help! My HP TouchSmart laptop will not go beyond the logo screen!

  My HP TouchSmart tm2 with VL618AV product number lights after the logo screen. I really don't understand why it is happeniing because it's just more than a year. I have Windows 7 and there are errors on the computer. Please help me.

  Yes-HARD drive is the hard disk. No way to know, without more testing, if it's hdd or other material causing a no don't start machine. Try to remove to see if you get any further as I mentioned above.

• TouchSmart laptop computer: I have HP Touchsmart (15-d020dx). How to disable the touch screen feature?

  I have HP Touchsmart (15-d020dx). How to disable the touch screen feature?

  Hello

  Follow the steps listed in the link below

  http://h30434.www3.HP.com/T5/desktop-audio-video-monitors/how-to-disable-touch-screen/TD-p/569755

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Win10 restart again and again to the logo screen

  Purchased 10 Windows to replace XP on an older desktop. When I ran the tool requirements of Win7, it said I was OK to upgrade. I guess if I can run 7, I can run 10.

  File .iso downloaded and made a bootable DVD disc. DVD player was 1st in the boot order. When I try to install Win 10, I get the logo screen, but nothing else. After about two minutes, the system restarts, restart to the logo screen. Repeat steps. I can never get the start screen where I choose the language or other options.

  My plan is to replace my current C: drive with a new blank disc to win 10. With two discs in place (one with XP, no), I'm still stuck at the logo, constantly reset screen. I have all my USB devices disconnected. No other disk attached to the system.

  I tested the DVD on a laptop running Vista; He engages in the start screen. But not on the desktop. At this point, I'm out of options. I'll have to go to the trouble to replace my MB (with processor, memory and possibly readers?)?

  Sorry, I can't understand it or the other. If you can read the files, I don't know why it does not start.  It's obviously a bootable DVD because it starts on the Vista machine.

  I am familiar with older computers that do not have the ability to boot from USB.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Liquid Z 3 How to use the small screen-receving-phone-call?

  Hello

  I would like to know how to use the small screen that appear in a case to receive a phone call.

  There are two types of screen wen we receive a phone call. I know how to use a larger. But not for the little ones. Aid for the small indicates that we have to drag the green phone symbol that I guess, but to fall on what? The manual doesn't explain it at all, it is not obvious!

  Thank you very much for your help!

  With "appellant float" activated, simply to press the Red or green button, no need to call, if the "small screen" is that of the attachment

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• my windows vista begins to turn blue every 5 minutes, when it restarts, the logo screen becomes blurry

  When I turn on my windows vista computer, all right. Then after 5 minutes the 'blue screen of death"is displayed, when the computer restarts, logo startup screen goes fuzzy and it remains on this page (the logo screen) blurred for hours.  After a day or 2 when I try to turn on the computer, on the entire process starts again (fine for 5 minutes, then it goes weird) what's the matter with him?

  Hello

  Use Safe Mode to try to troubleshoot - repeatedly press F8 when you start.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.