How to configure the network device agent

I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.

Can someone help me please.

Hi Cyndhya,

Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

Here is the step by step guide:
http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

Koffi

Tags: VMware

Similar Questions

  • How to configure the network adapter when you run ESXi on VmWare workstation?

    How to configure the network card installing ESXi on VmWare workstation 6.0.0?

    These are the options: I tried bridged, host-only NAP.  None of them works

    Network Setting Option.PNGNo Network Adapter.PNG

    What Miss me? driver or adapater?

    I'm running on vmware workstation on Windows 7 with Lenovo laptop.

    in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

    If please have 4 GB of RAM and re-run Setup. you will get through.

    message about the network card should also not appear after that. What kind of network you choose depends on your need.

  • How to configure the network home wiFi with dlink router

    I need to create a home network using the dlink WiFi router
    a computer with Vista and the second with XP
    can someone tell me what havo to do to configure the router etc etc o give me same informamation on where I can learn to do
    I want just the old pc with xp for the server and the vista one customer but more importantly I need the file on XP to migrate under vista.
    Thank you very muche for your end of the patient cooperation
    in return, I give free cooking classes
    see you soon

    I'm not sure if you are asking how to set up a secure wireless network, if you ask how to share files between your two computers (and there is no "customer" or "server" in a working group, in a field - which is not), or both.

    So I will give you information on doing both.

    Router - configure manually

    Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

    1. turn off the power to your cable modem.
    2. attach a class (usually supplied with the router) ethernet cable cat5e port Internet/WAN from the router to the ethernet port on the cable modem.
    3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
    4. turn on the cable modem. After that all the lights are on, turn on the router.

    To configure the router:

    Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

    http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

    This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

    Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

    Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

    Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

    At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

    Networking

    Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

    Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

    http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

    For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

    Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

    A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

    (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

    C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

    XP - configure Windows to login automatically (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

    Vista - Start ORB > Search > type: netplwiz [Enter]
    Click continue (or provide an administrator password) when you are prompted by UAC

    Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

    D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

    E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

    F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
    MS - MVP - Elephant Boy computers - don't panic!

  • How to configure the network for Windows XP boot

    I have a laptop from nec.
    the cd player does not work and usb either.
    It has an ethernet jack, but I don't know how to set up at the start of the network
    Please help thanks

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • How to configure the network between the host (Windows 8) and Guest (Linux)

    Hello

    I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

    Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

    Thank you.

    Abdul

    To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

    eth0 is a dynamic IP (DHCP) to get wireless internet access

    eth1 is a static IP address

  • How to configure the network wireless with an Equium L40-10 X?

    Could someone please help?

    To configure problems Netgear DG834G wireless router to communicate with my X L40-10. My ISP does not support the Atheros AR5007EG Wireless LAN.

    Thank you.

    Hello

    I can't imagine that it won´t work. Just a few questions:

    -Work with the factory-installed system?
    -Why Don t you use "Utility Configfree" Toshiba?
    -Have you already set on your router and your default machine?
    -Could you please give some information about your system and configuration of routers and computers? Can be useful for those who are not standing next to you, and to have physical access to your machine to check what the problem is. :)

    Maybe you should check these links to see how to connect to a wireless network:

    http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan_4.htm
    http://articles.TechRepublic.com.com/5100-1035_11-1048162.html
    http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

    Good luck buddy
    See you soon

  • Satellite L500-14N - how to configure the Bluetooth device?

    I can't set up Bluetooth device. I don't know my computer who bluetooch crutch.
    Please help me.

    Thank you!

    Hello

    Are you sure that your laptop is equipped with Bluetooth?

    I even checked the specs on the Toshiba page and it seems that Satellite L500-14N isn t equipped with Bluetooth and so you can configure it.

    Sorry, mate, but your laptop doesn't have Bluetooth.

  • How do I configure the bluetooth device

    Original title: pls help bluetooth & windows XP

    so brought of speakers of wi - fi creative d80 to my pc. I tried to activate bluetooth in downloading drivers. is it true that you can not bluetooth windows xp?

    Hello

    Thanks for posting in Microsoft Community

    I appreciate that you try to configure the Bluetooth device in Windows XP.

    I will definitely help you with this.

    Please follow the steps in the link.

    How to install and configure Bluetooth devices in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/883259?WA=wsignin1.0

  • Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

    Hi stuckfree,

    The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  • My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

    Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

    Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

    data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

    for the data. Also, perhaps the home page of IP camera offers software/drivers.

  • How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

    How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

    This is not possible with the way in which we collect information.

  • When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

    Unable to connect because of firewall or something, not true of course

    When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

    Hello

    I suggest you to follow the steps in troubleshooting this article and check if it helps:

    Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

    http://support.Microsoft.com/kb/871122

    Also read these articles and check:

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702/en-us?p=1

  • How to configure the router Linksys DD - WRT for WVC54GCA E4200

    I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

    I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

    http://tzodns.com/support/tutorials/188

    http://tzodns.com/support/tutorials/190

    Hi Majekho,

    Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

    In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
    In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

    http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

  • How to configure the CD driver on the host for a virtual machine?

    After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

    How to configure the CD driver on the host for a virtual machine?

    Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

  • How to configure the LDAP connector in windows server 2012 R2 Active Directory?

    How to configure the LDAP connector in windows server 2012 R2 Active Directory?

    Hello

    Please post your question in Server TechNet Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

Maybe you are looking for

  • Photos in albums

    I recently updated from iPhoto for pictures. When I used iPhoto, I created different albums and sort all my photos in them. However, now that I have transferred to Photos and you added a lot more photos, I know not who are in albums, and which are no

  • How can I get rid of the malware that does not allow us to go online for some reason any? Our computer is useless to the point.

    My husband had opened places an ad on Craigslist, when a pop up appeared on the screen to alert him to disable the software pop up advertising with a 1-855-453-2 * phone number 8. This pop up to continue and we cannot see anything online. Force Quit

  • Re: Windows 7 32-bit to 64-bit upgrade

    I am a newbie to the forum. I recently gave a series of t60p 2623 with the 7200 T processor and 3 GB of RAM shown and has an ATI X 1300 display adapter. It features 32-bit, XP Professional, and I would like to make a clean Windows 7 Home Premiun or p

  • Upgrade the HDD and RAM

    Hello I have a HP dv7-3085dx (product no: VM188UA #ABA) and I need to upgrade my hard drive to an SSD & increase my RAM. currenlty I have 500 GB hdd & 6144 MB ram DDR3. 1. Please let me know if Serial ATA III SSD (Samsung - 840 EVO 250 GB Internal Se

  • OfficeJet Pro 8610: printer drivers

    A 8610 Pro usable Officejet Officejet Pro 8600 drivers?