How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

Hi guys

hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

Here the link of the monitor

http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

here some specifications of the dell Notebook printer

Fix. You can also ask users on the laptop Video board on the platforms they use.

Tags: Dell Peripherals

Similar Questions

  • Latitude E7450 processor and controller, E - 2, unstable configuration port of the U2715H - two monitors-

    I have two monitors U2715H connected via a CDM-> DP cable each to a docking station E-Port Plus (in fact an Advanced Port Replicator EURO2) in which sits a laptop Latitude E7450 processor and controller. All items are brand new. E7450 processor and controller is equipped with 16 GB of RAM and two graphics cards: Intel HD 5500 Graphics and NVIDIA GeForce 840 M; selection is automatic, which usually means that the 5500 is running. It runs Windows 7 Enterprise SP1 (64-bit). The docking station has apparently DP 1.2 a capacity (for chaining) but DP 1.2 is disabled in both monitors.

    I have correctly configured the system to have Windows desktop space both monitors at 2560 x 1440 resolution, even with screen internal latitude as a third request for an extension to its full resolution (1920 x 1080). The main screen can be set to one of the two (or three) and I can successfully move the sequence of monitors around (left, middle, right).

    There is therefore no doubt about the ability of the system to support the planned configuration. However, when I dock the Latitude (most with the lid closed) and start, most of the time he is unable to restore the configuration of the two external monitors. Some of the symptoms are: one or two monitors go black, indicating the cable connected but no signal from the docking station. If there is a picture on one of the monitors at startup, it may or may not contain the login screen. (I can still log in because I know which keystrokes to send.) If the login screen is visible, it is usually in low resolution. If I have several active screens, but one is black, I can move the mouse pointer (or an entire window) on the screen black (in the middle or on the side), but it is not visible here.

    Both monitors come right out of the box and the only change I made is to move from the DP to the mDP as input channel. I reinstalled the cables and exchanged the cables between the two DPs on the docking station. I turned the market monitors. I ran the self-test the requirements on both monitors. The connection of the laptop on the docking station is a little wobbly, but I use the spacer provided for the E7450 processor and controller and making sure the connection is correct and stable. I've updated all the drivers and BIOS of processors E7450 and controller. I recently saw a reference to a BIOS for the docking station; I didn't know it existed, but I'm not.

    The installation instructions provided with the monitors were a note on consulting the CD provided for the use of the screen to maximum resolution. E7450 processor and controller is not an optical drive, but I read all of the documentation for the monitor to Support technical without finding what whatsoever to shed light on the situation (in addition to ensure that the graphics card and drivers are up to the task).

    Once I connected, I can manage to make it all in order by randomly (?) lower the resolution of the screen, change the position of the main screen (left-center-right), deselection reselection CDM as entry way and forcing other changes. Once the two or all three screens in operation, I can put them all to maximum resolution and beginning of work. However, it is rather annoying and I would like to have a stable configuration.

    The configuration seems to survive power cycling of the laptop / station but not if I also disconnect the laptop. I should mention that when I detach the E7450 processor and controller, I can use it in other configurations, with or without other external monitors through other ports, before turning it off and later re - anchor as described. However, for the first month I had two old non-moniteurs Dell of any resolution (on DVI and VGA ports) connected to the docking station and the configuration is stable, and for years I used for my older Latitude with a docking station that is older, remembering his device between different hardware configurations.

    Please, someone - and Dell support staff in particular?

    (Editing/updating after transfer of the Forum/devices/Forum/computer laptop and video monitors)

    A brief update of the Denmark...

    We have experienced the issue for several months since the purchase of laptops E7450 processor and controller and docks of Port E II.
    (HDMI screens / black screens with flashing DisplayPort).

    But the new Dock firmware A07 21 v3.10.1. April seems to have solved all our problems.

    Here is the link VMM3320 STD HUB Firmware for E5250/E5450/E5550/E7250/processors E7450 and controller:

    http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=FV9KP&FILEID=3535351776&osCode=WT64A&ProductCode=latitude-E7450-Ultrabook&LanguageCode=en&CategoryID=VI

    Best regards
    Martin

  • Screen resolution signal with Dell E7450 processor and controller. Help!

    Hi All-

    We have some Captivate users who have just received of new computers, touchscreen Dell E7450 processor and controller with WIN8.1 installed.

    We are current users of Captivate 8.

    The issue we encountered is that when attempting to capture using our preferences, screens change resolutions on us.

    Here is what happens...

    1. Changes to the user to screen resolution 1024 x 768 (applys and accepts the change)
    2. Selects to monitor 1, full-screen capture
    3. To start recording; registration ends

    When you look at capturing what we see is that the captured images do not show that 1024 x 768. There are large black borders on one or two sides, and the program that we are captures show left or right raised in a corner.

    When we check the properties, this also shows that the captured resolution isn't what we put on the screen (and still shows). It shows, he changed to 1280 x 960.

    Has anyone else had an experience like that, and if so, how have you solved this.

    We have tried several options, including moving at different resolutions, changing the screen capture to capture the application (which shows the current window too small to see the app), so the addition of an external monitor to see if a capture would work to form it. Nothing seems to work that we can think.

    Any thoughts or resolutions to try would be appreciated that we must make our developers back from work.

    Thanks in advance!

    We managed to find a solution to this problem thanks to Rick Stone...

    The PPP should be set to 100%

    apparently the default dpi has been set at 150% if once we have reset all worked as expected.

  • How to secure 2.5 SSD "during the upgrade of E7450 processor and controller of Latitude

    The laptop comes with the mSATA SSD and special support to insert this mSATA drive into the 2.5 ". Selector parts shows that 2.5 drives "are consistent with the model of E7450 processor and controller (for example article manufacturer: part Dell V89HX: 400-AGHM road), but there is no way to guarantee such propulsion in the slot. What is the recommended method? Simply attach the rear cover without setting the SSD at all?

    Hi, I ended up buying the caddy on e - bay

    Research of metal bracket for Dell Latitude E7440 caddy for 7mm HDD

  • Venue 11 keyboard connected to the docking station

    The place of meetings 11 keyboards can communicate with the Tablet when it is in the docking station?

    With the way the place of sessions 11 is in the docking station, it would be quite difficult to have a connected keyboard because he wouldn't level with your office.  If you use the docking station, shouldn't you already have an existing configuration of the Office you can take the keyboard and mouse of?

  • Two external monitors can be connected to the docking station?

    Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

    Yes, you got that right.

    He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

  • How can I stop my incoming monitor of the 'save energy '?

    How can I stop my incoming monitor of the 'save energy '?  I use Firefox as my browser on Vista Home Premium.

    Original title: enter energy saving?

    Hello

    See if this helps you (second article for Vista):

    Disable power management in Vista

    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

    http://www.ehow.com/how_6799294_disable-power-save-mode-Vista.html

    See you soon.

  • I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

    I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

    Hello

    I suggest you to contact MSN customer support for assistance.

    Here is the link for "how to contact MSN Support.

    http://support.Microsoft.com/kb/940784

    I hope that helps!

  • Laptop with docking home & two monitors... need to get laptop to work after the withdrawal of the docking station

    It drives me crazy.  I have a work Dell laptop connected to a station host and two double monitors. It works very well at the office that I work mainly on two large dual screens.  When I remove the laptop from the docking station and bring home the computer starts and displays a portion of my homescreen (like an extended display).  But I can't do anything else with it. I can't access my files or anything.

    What I want to do now that I'm home with my laptop is to redo the settings so that the laptop is my main screen.  The normal methods of right click and change the screen resolution do not work because I can't access my Windows start tab.  Any ideas...

    Thank you.

    Hello

    Thanks for posting your query on the Microsoft Community.

    I would be grateful if you can provide us with the following information to determine the root cause of the problem.

    1. What is the number and model of your computer and the graphics card?

    2. Have you tried to monitor primary as secondary and vice versa?

    3. All device drivers are updated?

    Windows can detect automatically that an additional screen. If you connect two or more monitors, you must manually designate the primary display, arrange your desktop, and apply display settings, such as color depth and screen resolution. So, the next time that you connect these monitors, Windows automatically identifies the primary display and applies the settings that you previously specified for each additional display.

    Try the methods mentioned below and see if it helps.

    Method 1

    If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

    To change the settings of two monitors you can consult the links below:

    Guided Help: Setup dual monitor is easy in Windows 7!

    http://support.Microsoft.com/kb/976064/en-us

    Change settings display on multiple monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

    Note: This link is also applicable for Windows 7 .

    Method 2

    If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    See also:

    Work and play better with multiple monitors

    http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

    Setting up dual monitor: two screens are better than one

    http://www.Microsoft.com/athome/organization/twomonitors.aspx

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • Question on the docking station and external monitor support

    Hello

    Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen).

    Thanks in advance

    rogers7942

    This allows 2 additional monitors in addition to the laptop screen:

    http://h30094.www3.HP.com/product/SKU/10432932

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Grateful two monitors on a docking station

    For some reason windows is not recognizing my two monitors I have connected to my HP NZ223AA 230W Advanced Docking Station.

    I use Windows7 64 bit on an HP EliteBook 8560w with an AMD over-pants m5950 graphic card.  As near as I can tell the docking station allows the two DVI ports to use as well as the grahpics card is good for multiple monitors.

    Does anyone know if it is possible to connect a third monitor?  In other words, I have my laptop connected to a station host and then two other monitors for a total of three.

    Thank you

    Cannot be done. The graphics card is soldered to the motherboard.

  • When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

    Hello

    With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

    So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

    This will help you when you move frequently with the laptop.

    Docking station will save your time, outside any other aspect, that it has to offer.

    Zaki.

  • When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

    When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Step 1: Search for the issue in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    a. Click Start and then click Run.
    b. type msconfigand click OK.

    The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
    d. When you are prompted, click on restart to restart the computer.

    Step 2: Change or disable startup Windows and exit Windows sound and check.

    a. click Start, click Run, type mmsys.cpland then click OK.
    b. click the sounds tab.
    c. under program events, click Start.
    d. in the sounds box, click (none), or different sound, and then click OK.
    e. click exit Windows.
    f. in the sounds box, click (none), or different sound, and then click OK.

  • sound on laptop lost when it is connected to the docking station

    laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

    Hello

    ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

    When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

    a. click the Start button, select Control Panel, click hardware and soundand then click sound.

    b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

    c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

    d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

    If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

    e. Select the audio device you want as audio device by default, and then click set as default.

    f. click OK to save your settings.

    For your reference, follow the steps described in the following link:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  • How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on

    How can I activate back my administrator account after my windows automatically restarts with an administrator.user (new) account and so on.

    I got this without my notice:
    Administrator
    Administrator.User
    Administrator.User.000
    Now, I want to go back to my old files with the first administrator account. Also, I would like to know why.

    Hello

    Thanks for the reply.

    I suggest you to refer to this article to check if this help.

    Resolve stop (blue screen) error in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

     

    Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

     

    Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

    Let us know if you need assistance with any windows problem. We will be happy to help you.

Maybe you are looking for

  • Very grainy Youcam problem after "setting fix advanced dark screen" in dv7

    Hello. I have the YouCam came with my computer, which is a HP Pavilion dv7 Notebook PC with Windows 7 Home Premium, Service Pack 1.  Since I got it, I installed all the updates. I was JUST able to solve the problem of black screen that many people se

  • software m276nw

    I need the scanner software & other utilities that came with my m26nw all in one. I can't find in the downloads - only drivers. Can someone tell me if there is place to download utilities to scan or buy a replacement drive?

  • I use a compaq 2002 esystem pc using windows xp home edition Pack 3 and having trouble understanding how to make my pc wireless active

    Sky was issuied me with an installation CD, which says that it cannot find a wireless function on my pc but there is a connection network wizard in my pc but do not know how to set up the connection, I am currently connected to the sky with a wired e

  • ERROR 1935. HRESULT: 0X800736B3

    In November 2009 my laptop told me I had a virus, then all of a sudden it crashed and wouldn't turn on so I have to erase everything and re start. A month after that I went to download Itunes, it should reach the end and then tell me that it was a mi

  • Z3 BlackBerry Documents to Go for Blackberry z3

    Opens blackberry z3 documents such as words, presentations, excels, and a PDF without Documents Go ask as, for example, blackberry 9360? BlackBerry 9360 has no need to go request to run these files, documents. It would automatically open Word, presen