How to connect a plasma panel digitally to Qosmio F10-130

Hello

I just orderer F10-130 and I would like to connect my Panel plasma with a digital video signal. The monitor has a DVI input and the F10 has a'D-video out' so-called interface I've ever seen elsewhere. What is the best way to connect the two devices? I know D - Sub or S-video VGA should work, but IMHO, it is not state of the art. A D-Video/DVI adapter exist?

Kind regards
Marsu

[Edited by: admin 14 March 05 21:12]

Hi marsu

Connection D Qosmio port, you can connect to the TV SCART port. The cable is supplied with the laptop Qosmio. Sorry, but I think that there is no ability to connect to the DVI port on your TV.

The only thing you can do is ask some experts in electronic stores if there is a solution for this problem.

Tags: Toshiba

Similar Questions

  • How to connect Ipad to a digital audio device?

    Hi, I use my Ipad for recording with Garageband.  I had connected my Ipad 2 to my mixer using the camera connection kit and a USB cord.  The end of the USB is a USB B.  http://www.C2G.com/UK/static/content/images/resources/connector-guides/450/035_u sb_b_f_iso.jpg

    This configuration doesn't work anymore since I was an Air of the Ipad.

    So, how can I connect the Air Ipad USB b?

    You can try with the lightning to the USB camera for newer iPad adapter. It's the same thing the Camera connection kit has done with the older.

    http://www.Apple.com/shop/product/MD821AM/A/lightning-to-USB-camera-adapter

  • Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

    I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

    * note: I do not use TNT or TV I'm on SKY DIGITAL *.
    SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

    I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

    Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
    Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

    Hi Liam

    AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

    You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

    The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

    Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

  • Double option missing in several drop-down screens with Windows 7 connected to Panasonic Plasma Panel

    Working with multiple monitors with Windows 7 - connected Panasonic Plasma Panel to the laptop. He showed parallel double screen on the two instantly. I tried to set the resolution and then display duplicate in multiple monitors drop down option is no longer available? What is the benchmark for this - I want to use two monitors with the same screen for the discussions.

    Hello

    You can try to configure the display on a very low resolution just to test if the option back. If it comes the problem is related to the video card is not able to support a higher resolution. So, I suggest you contact the manufacturer to obtain the best resolution taken in charge check and graphics card if it helps.
  • Q. G20-117: how to connect to a digital antenna (DVB - T decoder)

    Hi everyone, hope you can help me with some tips and tricks to connect the Qosmio G20-117 computer to a digital antenna (DVD-T set-top box) from Samsung.

    The problem is that the connection with the coaxial cable is really very bad, so I'm wondering how to connect this receiver with a cable SCART original...

    Thank you!

    Erik

    Hello

    As far as I know original SCART cable can be used just for the signal and not the signals in. In my opinion, you must connect the external device to your Qosmio use composite cable. Check it with Qosmio player. Scan of the channels and a single channel should be based.

    Good luck!

  • How to connect laptop to plasma display

    I have a laptop of Lenovo, which has VGA and USb ports but not HDMI. My LG plasma 50' has HDMI ports. How to connect my laptop to the TV. I used a cable USB to HDMI, but the TV kept showing no Signal and portable USB port showed peripheral unknown. Help PLZ

    Earlier, I used a HDMI VGA cable but I faced the same problem.

    Hello

    see if that helps you

    http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

    http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

    http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  • How to connect the digital camera Canon PowerShot A200 computer

    How to connect canon powershota200 to the computer (windows 7 32 bit)?

    Your options include the use of the USB cable provided with the camera or you can remove the SD card from the camera and insert it into an SD card reader if we're a part of your computer.

    If you are using the USB cable, the device should appear in devices and printers (Start menu), and browse the camera and copy videos or images from the camera. This can also be done via Windows Explorer.

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  • Satellite A300 - 20 p - how to connect a 5.1 audio genius

    How to connect to a 5.1 audio genius?

    Hello

    The SPDIF port is available on this unit.
    It s a part of the helmet so why you n t try to connect the stereo system on the laptop using a * TOSHlink cable. ????

    In this case, you will get the digital audio output

  • M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

    Any help is appreciated.

    This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

    I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

    I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

    Any help is trully appreciated.  Thank you.

    Hello

    The Jetdirect 3000w feature:

    http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

    It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

    http://support.HP.com/us-en/document/c04762612

    Kind regards.

  • HP 19-2113w: how to connect HP 19-2113w tv HDMI

    I am looking for directions on how to connect my HP 19-2113w to my TV via HDMI.  Could someone guide me please? Thank you!

    I don't know if there is a feature that makes these two functions at the same time, should be two devices, the USB adapter to HDMI for the video of all-in-one on television, another would be a digital TV Tuner.

  • Pavilion dv2 laptop: how to connect as administrator

    I used my HP recovery disks to restore my laptop to condition factory & now want to install the updates of Windows (Vista), install programs, etc.  Vista updates are installed by Service Pack 2. I have installed/activated Microsoft Home & Student 2007. Then (via Control Panel / Windows updates) I clicked «get updates for more products» Forcing an update of the Windows Update software.

    Then, there were 163 updates... 17 load without problems... then there have been 158 updates (163-17 = 158?). I tried to install those & told me I need to log on as an administrator.

    How to open a session as an administrator?

    I am the only user on this computer. I never connected as administrator (before or after the use of HP recovery discs). Whenever "authorization" is required, I always just clicked OK or whatever... no opening of the special session, or password was necessary.

    Hi @jarhtmd ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv2 Notebook and need to know how to connect as an administrator. Here is a linkthat might help you.

    I hope this helps.

    Thank you.

  • How to connect a cluster of berries to a waveform graph

    I'm trying to reproduce the pattern-block which is attached to this issue, but I don't know how I connect the waveform to my clusters of berries. I get an error that "the type of the source is table 1 d of cluster of 2 elements. The sink type is 1 d doubles [64-bit real (precision ~ 15 digits)].

    You need a chart xy, not a waveform graph.

    (Remember also that this table index is resizable. You only have a single instance. Your photo code is old, ~ LabVIEW 4.0 or MORE)

  • How to connect to the list of the pins for a redeclenchables pulse train

    Hello

    I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series for the pinout descriptions, but I don't know how they apply to the program on this page. When I connect DOOR a meter, THE, A, B pins, etc.?

    Any input on what to connect or pages that may make how to connect the counters would be very useful.

    Thank you.

    Your most recent post of links to an example more advanced sounding & I recommend that stick you with something simple to start.

    Your first post links to such an an example where the signal of pulse train going out of Ctr0_Out.  Ctr1 is used to make the trigger and the 'break' (enable / disable) Ctr0.  However, much of this stuff is configured using some features of DAQmx such that you don't need to physically connect the pins between the two counters.

    Only physical wiring that you need is to plug your physical digital trigger to the PFI1 signal and connect Ctr0_Out to some external thing must receive them.  As long as your device is called "Dev1", I think this example to work.

    I know there are some docs useful for more general info on the pins meter & behavior, but I don't remember quite so that I have not watched for them for many years.  Meanwhile, here is a * little * bit General description I wrote myself once.

    -Kevin P

  • How to connect incremental encoder to NI9411?

    Hello
     
    I need to connect an incremental encoder to a NOR-9411 digital input on a chassis cRIO module to use for high-speed triggering.  I'm having trouble to know how to connect the wires needed to the encoder until the 9411 correctly.

    The son of transport the following signals:
     
    A red
    B Green
    Z Brown
    + V blue
    OV-Orange

    I'm fairly inexperienced with the connection of the sensors to LabVIEW gear, then please let me know if I can provide more information on my installation.

    In addition, attached is the datasheet for the encoder.

    Thank you very much!

    Alex

    Hi Byrd,

    Thanks for the post and I hope that your well today.

    I'm afraid I'm not totally sure what is your problem.

    The NI 9411 manual can be found here: for additional reading.

    The manual explains how to connect unbalanced devices on the 9411.

    page 12:

    "An example of asymmetrical device is an asymmetrical encoder. Connect each of the encoder signals (phase A, phase B, and)
    the index) to one of the pins in a pair of pins of DI. Figure 5 shows the connections for an asymmetrical encoder. »

    In labVIEW, you can then create a DAQmx task to read all digital lines.

    Hope this helps to get started you,

  • How to connect my computer to bluetooth LG Soundbar speaker?

    Original title: connect my xp sp3 to bluetooth soundbar.

    How to connect my computer to my LG Soundbar speaker bluetooth.  My computer is AMD Athlon (tm) 64 x 2 Dual Core Processor 3800 + 2.01 GHz - it's an Acer... It is running on XP Media Center Edition version 2002, service pack 3.  I looked for assistance on this issue and can not find where the "Bluetooth" option is on my computer.  I press the Start button and go to the control panel and there areno icons or options for a bluetooth device.  I also tried to look in my printer and other hardware folder and there is nothing about bluetooth technology on this issue either.  Is it compatible Bluetooth on this operating system or is it the computer... can you suggest any material I could buy if necessary.

    Hi Kwordock,

    1. What is the brand and model of your computer?

    2. do you see bluetooth devices listed in Device Manager?

    If your computer doesn't have any available bluetooth function,

    You can use your favorite search engine & check any bluetooth device with your computer or check with the local techshop for a bluetooth device.

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

    Hope the helps of information.

Maybe you are looking for