How to connect a wireless and boardband on HP laptop wireless mouse

Similar Questions

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect or activate my wifi on my laptop Windows 7

  How to connect or activate my wifi on my laptop Windows 7

  From Internet Explorer

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hi AlfrickHyatt,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you want to know how to enable the WIFI on Windows 7.

  I will surely you help with this.

  Connect to a WIFI network try these steps and see if it helps.

  a. go to the Start Menu and select Panel.

  b. click on the category network and Internet , then select network and sharing Centre.

  c. in the options on the left, select change the parameters of the map.

  d. right click on the wireless connection icon and click on turn on. You will now be able to connect to a WiFi network and sharing Center.

  Check out the link for more information.

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• Hi, is it possible to connect a wireless mouse for my 820 W4 Iconia Tablet?

  Hi, I'm a new Member here and am wondering of there is a possibility to connect a wireless mouse for my 820 W4 Iconia Tablet?

  hans0919

  It is pretty easy to do, but you need the appropriate adapter cable (I have this: http://www.amazon.ca/Asuxtek%C2%AEMicro-USB-Host-OTG-Cable/dp/B00E8CL09Q/ref=sr_1_2?ie=UTF8&qid=1407... but something similar will work).  Plug you it into the USB on the W4 and receiver microphone wireless for the mouse inside and you're good to go.  The one drawback is that you can't easily load the W4 during use.

• Is it possible to connect a wireless mouse to two laptops?

  Original title: 1 to 2 laptops wireless mouse

  I want to connect a wireless mouse to two laptop computers side-by-side.
  I have 2 Microsoft wireless mouse.
  I connect the each mouse wireless usb device in each book, but a mouse cannot move the cursor on the other screen.
  Is it possible to do? I want to click a mouse to trigger events in the two laptops, simultaneously.

  Hi Edison,

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you want to use a wireless mouse to control computers in tow.

  Unfortunately, it is not possible to control two computers using a single wireless mouse.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• How to connect a wrt150n and a whole wndr3400v2 to extend your wireless connection

  How to connect these two wireless routers, but the first as a main router without losing my security and configuration of port forwarding?

  Thank you in advance for your help!

  Thank you very much for the help. The wndr3400v2 is enough for my house. Yes, problem solved.

• How to connect two wireless laptop to an unsecured internet connection

  me and my friend. We have detected a wireless network of neighborhood, it is able to connect, but I can't

  How to connect wirelessly

  MR. PHILIPPE,

  Make sure you have your wireless card install correctly on your computer. If you have a laptop then you have a wireless card already in the machine.

  That's all need you. Go to start > Control Panel > network connections, here it takes a current wireless connection. If no, you must install you wireless drivers from the manufacturing of the Wireless card in the computer. (Linksys, Netgear ext...)

  Please rate me upward if you find my post helpful. Thank you!

• How to connect C4795 wireless to wireless HP Pavillion

  I have a wireless HP Photosmart C4795 printer and an HP Pavilion wireless.  How to connect the two?

  Hi Lance835,

  Follow the steps described in the following document.

  http://support.HP.com/us-en/document/c02273853

• have satalite, how to connect sony bravia and blue ray player to wired dsl internet

  have satalite tv, how to connect my player blue ray sony bravia tv and sony to a wired ADSL internet connection,

  Hello

  What do you mean exactly when you say hacking people have constantly been in?

  If you feel that your computer can be hacked, I recommend you install a good antivirus. You can install Microsoft Security Essential. This is a Microsoft free anti-virus program.

  To secure the wireless connection, go through the steps from the link and check if it fits your need. Browse the article to learn more about securing your wireless connection.

  Hope this helps and let us know if you need assistance in the future. We will be happy to help you.

• How to connect a wireless printer to a wireless password?

  I recently moved and have a new wireless router with security. How to connect a printer wireless router again?

  I recently moved and have a new wireless router with security. How to connect a printer wireless router again?

  You must read the instructions supplied with your printer, usually on the installation CD.

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect to wireless internet?

  I just reinstalled WinXP (2002 I think) from my (old) Dell Latitude D610 laptop installation disc.

  I did it just to get rid of unnecessary and old programs that I didn't.
  I remember I used to be able to connect to wireless internet, but my father, who once used this computer says he thinks that it has deleted the ability (?).
  If I do
  Control Panel > network connections >
  There is nothing in the record that says wireless or LAN or it is supposed to say
  In the lower right corner of the task bar, there is no symbol for it
  If I do
  My computer > properties > Device Manager >
  There is no network card anywhere, but it has Ethernet controller, network controller, PCI Modem and PCI Simple Communications Controller all with '! ' for their icons.
  In addition, there is no switch for the adapter to network/radio outside the computer.
  I feel that this computer has maybe just need to be connected by a wire, but has no sense because it's a laptop and I don't remember having need to be wired previously

  Thanks guys,.

  I think I've fixed everything.
  I got all the drivers I needed pcidatabase.com and installed all my without wire works, and so I need drivers for others.
  Do you think that a computer of this old (7 years) is worth keeping?
  I do not have access to newer computers, but it runs pretty quickly because it did downloaded to it. If this is the case, you think I should update in any way?
  Once again, thank you for your help.

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike

• How to connect to DisplayPort and fresh?

  Hello

  I think to buy the new Macbook from 2016.

  When I'm at home I would like to use it as a desktop machine so I have to be able to plug in a monitor DisplayPort, USB HDD, wireless mouse and keyboard dongle and load the Macbook at the same time. Is there a USB Type-C dock that would allow me to do this?

  The dongle that apple provides is only HDMI (my monitor has HDMI but he's busy). I thought that the implementation of USB Type-C supports DisplayPort? He has to like Apple sell USB Type-C cable DisplayPort. So, why don't the dock adapter / provides DisplayPort? DisplayPort is the most versatile because it can be easily and cheaply, be converted to VGA or HDMI, but you can do the opposite without an active converter expensive.

  Thanks for your help.

  There is no such thing as a Mini Display Port cable USB - C. Apple.  They have USB - C for USB, USB - C for Multi HDMI port and USB - C for Multi VGA.

  If you need to use a Mini Display Port display and charge at the same time, you will need a dock. currently only Dell made a dock USB - C with Mini display port.

  http://Accessories.us.Dell.com/SNA/ProductDetail.aspx?c=us & CS = 19 & l = in & SKU = 450 - AE UO

• 8 flow HP will connect with wireless mouse

  I'm 8 HP flow. I need to get a wireless mice for my (Windows 8.1) Tablet PC for an upcoming event.
  
  First of all, I need to know if the 8 workflow HP will work with a mouse and display (the mouse pointer) on the computer screen.
  
  Second, I need to know what kind of mouse will work with it (Bluetooth, wireless, wired, other).
  
  And finally, how do I connect the mouse with my Tablet PC.
  
  Thanks in advance for your help,
  John W
  
  

  I have 8 HP flow, recently I bought HP T800 Bluetooth Keyboard box. The only thing that was missing was the mouse. I tried to use the usb wireless mouse, but used only available for the receiver usb micro usb port mouse.

  The best solution for this is to buy the bluetooth mouse wireless, available with HP and Logitech M557.