How to connect Agilent 8163 b via the serial port

I have a problem connecting to the serial port with Agilent 8163 b. The driver that I use is driver_vxipnp_816x_4_1_4.exe. The problem always message display "Visa resource not found. Check the HPIB-Bus address"when I use the components inside the"hp816x tree.vi ". However, I have no error if I use normal read and write VISA.

Y does it can someone help me answer my question? Thanks in advance.

Thanks for the reply.

I face a problem that you use with GPIB-USB-HS due to the physical dimension, as shown. The width between the remote locking connector (FIR) and (w1) GPIB connector to the appliance is too small for the GPIB-USB-HS (w2) connect to this topic. If I unplug the connector RIL, tunable Laser will not be activated. So I have a few questions as follows.

1. the LabView can always activate the tunable Laser if I unplug the connector at RISK in my case via GPIB?

2. the LabView is compatible with GPIB connector (model x 10833) Agilent?

3. is there a way to solve the problem posed by the RIL connector unplugged?

The drop box

P/S: version please is 4.84 to 8163 b.

Thanks for the help and I'm too new in this field.

Tags: NI Software

Similar Questions

  • Transfer an image via the serial port of PC to PC

    Hello world

    can someone help me to transfer an image file to another PC with Labview via serial port?

    I tried to use the IMAQ functions to decode the image to a string. but there is a problem at the receiving end to retrieve the image.

    is there an easy way to just sent and receive an image via the serial port file?

    Thanking you in advance.

    Morgane

    Hello

    I love people who love to learn. Thanks for listening.

    I updated read and write Subvi is because I believe keeping simple and straight threads more readable program and less bugs remain.

    Even better, my eyes straight lines i do not get tired too soon.

    good luck with your program.

  • Problem connecting to HP DJ5900 via the USB port on the router

    HP DeskJet 5940, MacBook Pro, OS x 10.6.8.

    I want to connect the DJ5940 through my router (Speedport W723V) via the USB port.

    I see that the printer is connected to the USB port of routers and adding a printer on the MBP works.

    However, when I try to print, printing dialoge sas is printing (full % increases), but nothing is displayed and the status of the printer finally chnges for "printer paused".

    Is what I'm trying to do possible?

    Dean,

    Thanks for your help, but I went in a different direction: the Speedport router is EXTREAMELY oriented Windows, to the extent that it has nothing in the documentation to do anything with a Mac, so I've dug a former print USB/Ethernet of Axis Communications Server. At least 7 years old and no documentation, but connect to its IP address allowed me to set it up, and Macs connected to it directly.

  • How to periodically send various types of data via the Serial Port?

    Hello! Everyone

    I have to send data to LabVIEW to my device on the Serial Port.

    I know how to send data on serial port in LABVIEW, I already have this part.

    Now the problem is that I have several types of data I need to question my embedded device, if I want to send the query periodically command.

    So lets say that my four Op Codes are the following, which will send four different types of query command to my device on the serial port.

    (To be honest only OP_LED and OP_SENSOR is used now)

    0, OP_SYNC

    1, OP_LED

    2, OP_SENSOR

    3, OP_FUTURE

    Structure of basic package is as follows:

    Header (0x2C), Checksum, length of the data (n bytes), Op_Code (1 byte), length (length of Code + data Op)

    For OP_LED, I need to send the package as follows:

    0x2c 0x02 0x01 0 x 00 0x2F (0x2F being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

    Length of the package this is 0x02

    0x01 is Op Code for OP_LED

    In the same way

    For OP_SENSORi need to send the package as follows:

    0x2c 0x03 0x02 0x00 0 x 00 0x2D (0x2D being the XOR checksum) (calculation of Checksum part is done and SUB Vi form)

    0x03 is length of packet here

    0x02 is Op Code for OP_SENSOR

    So, how can I do this periodically in labview, in such sort that period can be adjusted whenever necessary.

    Is there something in LabVIEW to do.

    I had done the reception and decoding part and working properly.

    http://forums.NI.com/T5/LabVIEW/store-data-coming-from-serial-port-in-buffer-and-then-take/m-p/32722...

    So I must implement read and write the part of same while loop?

    Do not insert in the table if you put data in an array at index 0.  Just use array to build.

    No need to have Visa to write don't be a part of wire to the wire of reference and error VISA go in the upper part.  These wires should go THROUGH the entry VISA.

    Don't your checksum requires all the bytes up through data?  Righ now, you only put the checksum on data bytes and forget the opcode and length bytes.

    Your sending is not the opcode for Opsync or Opfuture.  You just send the empty tables.  At the same time for the other two, you put the opcode in the data table.  All your original opcode in the table build thread.  Get the data out of these structures in case item which is supposed to represent the opcode.

    xpress_embedo wrote:

    Now it works but I have now two problems.

    (1) OP_SYNC and OP_FUTURE do not data, but still receive its data on serial port, can I do something here as I have nothing when the table is empty in the structure of the case.

    I do not understand this statement.  Perhaps my answer above will fix any issue you have here.

    (2) how can selection operation Code to be send is done using control façade but real application, this task should be automated to a certain frequency, like OP_LED package must go out to the serial port to 100msec and packet OP_SENSOR must go out to 1000msec, I do this.

    Now you agree a little more architecture.  I would encapsulate the code that is in the while loop as a Subvi.  Then with the hand of your program while loop, use two time Express VI, a game for 100 msec, the other for 1000 msec.  When an express VI is true, run the Subvi with a command set waiting for the answer.  When the other VI Express is true, have it run the Subvi with the other set of commands.

    The device responds with anything when you send these commands?  You only send data.  I see no VISA Read to be able to recover all the data.

  • Satellite P750 - unable to connect an external display via the VGA port

    Hi all

    My problem is the following:

    I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

    The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

    This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

    I already have:

    -try to play with FN + F5 / "windows" + buttons P - no change
    -install the latest drivers BIOS and video site Web from Toshiba - no change

    Suggestions how to operate? Is it possible that the VGA port is faulty?

    Thank you in advance.

    Hello

    You have the same problems with a HDMI output port?
    Usually, you don't need to change anything to get the external monitor works.
    Press Fn + F5 several times until the monitor RGB (VGA) was selected
    Since you can choose an HDMI output too, you should pay attention to this option.

    Have you tried to change the resolution before using the Fn + F5?
    It s worth a try

    Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

  • Cannot sync to the device via the serial port

    I have to read the data with a DSP associated with an EKG. For this I need 5 bytes (0x00 0x80 0x00 0x80 0x00) in a specific order that are sent through the port every second. I followed the data sent via the port and these 5 bytes are actually get received, however I havnt managed to find with my VI. I tried many different ideas without success and maybe Im doing something wrong. My latest attempt uses a waiting on event so I won't miss all the data. Ideas? See what I'm missing?
    I'd appreciate any help!

    I think you are using the wrong function.  You use Match true/false String.  Said context-sensitive help "examine beginning of string to see if it matches the true or false string. This function returns a Boolean TRUE or FALSE value in the selection, depending on whether the string is true or false string. "Well, suppose that the string isn't everything at the beginning, but as another byte in front of her?  It will not find the search for string.  And the wiring of the same search in True and False are strange because if it is found, then it is both true and false at the same time.

    You should use search and replace or search/Split string to determine if and where the search string is inside the largest chain.  (I would take research/Split).  If the string is not found it returns-1, otherwise it returns the location of the string.  And it has the advantage of any return after the game you could feed in the shift register for a search on the next iteration.

  • How to create a stop button to send commands via the serial port and finish labview vi?

    I want to send two commands on my camera, the first to stop the execution and the second to get out of the remote control mode. This is done on RS232. What I want is a way to put this in my existing VI that tells the device to run. Now if I stop the program, that the devices just run the last command unless I have stop manually. How can I set up a stop button that are not sent to all orders except in such a hurry? I tried the structure of the case, but didn't know how to put a part of 'status quo' If island stops in the while loop is not pressed the button.


  • How to connect an additional monitor for the gateway all-in-one?

    Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

    I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

    I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

    in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

    Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

    Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

  • BlackBerry Torch 9860 smartphones does not connect with the pc via the USB port.

    We have a new Torch 9860 which does not connect with a PC via the USB port.  What should do?

    SlaKir wrote:

    The answer is YES

    Well, then your USB port is likely.

    Restart the PC and BlackBerry (with smart BlackBerry power onthe phone, remove the battery for a minute and then reinsert the battery to restart).

    Then, connect with the USB cable and a rear main USB port at the back of the PC, not a front USB port.

    Hear a ringing or sound from the PC indicating that the BlackBerry is connected?

    Start the BlackBerry Desktop Manager software. Give it a minute to recognize the connected BlackBerry device... you see the code PIN of BlackBerry on the PC in the BlackBerry Desktop software?

  • MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

    Hello

    So, here are the problems I encounter, and what I did to try to fix myself.
    Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
    What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
    I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

    Hello

    1. What is the number of brands and models of MP3 player?

    2 are logged in as an administrator on the computer?

    3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

    4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

    Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

    Response with more information to help you.

  • Problem using the serial port with windows 7

    Hello

    I have a modem of SIM cards (used to update remote controller of the electronic gate) that connects to my computer via the serieal port (COM1).

    The modem comes with its own piece of software that worked fine on my old computer with windows 7 (I had a similar problem, but then I just need to update the driver).

    I now have a new computer and I am unable to connect using the modem (I think I'm using the latest drivers for the serial port).

    Is it possible that I need an older version? If so, how can I get a?

    My motherboard is a GIGABYTE H81M-D2V.

    Any ideas?

    Thank you

    AVI

    Hi Avi,

    Thank you for the update on the issue.

    The UART, or Universal Asynchronous Receiver / Transmitter, is a characteristic of your microcontroller useful to connect serial data (text, numbers, etc.) to your PC. The unit switches incoming parallel information (in the microcontroller/PC) to series data that can be sent over a communication line.

    According to the description you provided it seems that your modem isn't connecting with your Windows 7 computer, then I would contact Duetech Berès your modem manufacturer, so that they provide you with the steps to set it up.

    Get back to us after contacting them and please get back to us with your question was last updated.

    Kind regards.

  • read the serial port management using the SRM Protocol

    Hello

    I have a gas analyzer that communicates with the PC via the serial port.

    This is the "Industrial VarioPlus SRM".

    I have attached a PDF file that describes the communication protocol.

    I'm trying to decode the data that are sent from the parser, but I can't do it.

    I have attached the vi in which I made some effort.

    Any help is appreciated, at least for a single value in the data stream.

    Thank you.


  • Problem after connecting via the USB port of the printer. Error 0x0000007a

    Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

    My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

    Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

    When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

    I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.


    The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

    Any suggestions?

    Hello
     
    This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
    You can try to uninstall and reinstall printer driver and check if that helps.
     
    Here's how you can do:
     
    1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
    2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
     
    After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
     
     
    Kind regards
    Umesh P - Microsoft Support
  • BlackBerry smartphone how to connect PC to internet via BB? + Some app that measures minutes of phone calls and sms?

    Hello

    I have 2 questions. How to connect PC to internet via BB? Is an app that measures minutes of phone calls and sms?

    And one not so important question: what games and app that you most like and use, which are the best?

    Thank you very much for you reply

    Follow these steps to use as a modem attached

    http://www.BlackBerry.com/BTSC/KB05196

    When you get to the part where you enter the APN settings of the carrier that you will find on this site

    http://www.BlackBerryFAQ.com/index.php/Carrier_specific_APN/TCP_settings

    Here's an application that measures the information you speak

    http://www.BerryReview.com/2009/07/20/David-a-cheap-wireless-data-SMS-minutes-usage-monitoring/

    I use Facebook, Google Talk, Google Sync, Pandora, Gokivo Navigator a lot

  • How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

    I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

    Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

    Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

    Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

    I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

    It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

    My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

Maybe you are looking for

  • Toshiba TEMRPO alert: disk space to level critical

    I have a lot of space on my Satellite U400: Vista (c :)) 70.7 GB free on 177 GoData (e :)) free off GB 113 108 GB However the Toshiba TEMPRO alerts with space drive at the level critical guard appearing all the time! "Toshiba TEMPRO issued an alert t

  • My iPad 2, iOS 9.1.2 safari crashes constantly

    Safari is constantly crashing and I can't seem to fix. Can someone help me?iPad 2, iOS 9.1.2, lots of storage. I tried to restore my iPad, to soft and hard closures, nothing seems to help.

  • Windows Service Pack 3 for XP

    I try to install Service Pack 3 on Windows XP after a system restore, but I can't seem to install, I tried everything.  Get error message 0 x 80244019.  Please someone help, I'm going crazy!

  • OEM version of vista

    I have a dell insperon 531 and it meets all the requirements, and I want to upgrade to windows 8 windows vista home premiimum. Would I be able to upgrade the OEM Version of vista?

  • Adobe Flash Player not working not

    Adobe Flash Player, being updated does not work on my Vista!  Weather in Feb & March.  I redownloaded it, the program said it was installed but it does not work.  IT's as if it does not exist.  How do I convince it works?  Is this a problem of intera