How to connect an office jet T45 for s Apple laptop

Similar Questions

• How to connect the HP Officejet Pro 8610 to a laptop that does not connect to internet

  Just bought the HP all-in-one Officejet Pro 8610 for the local historical society. The laptop and the printer will be connected to the Internet. The printer will only be used for printing reports, scanning images, etc.

  I just removed the instruction manual to familiarize myself with the connection procedure, but I noticed there are several references that require internet access.

  Is there a workaround solution that allows me to install/connect the printer without having to access the internet?

  Thanks in advance for your help.

  Hello

  Given a special environment USB is probably the way to go. You don't need a special USB cable. Your printer has two USB ports, one on the front (#4) and the other at the back. You must use the rear USB port (#13)

  

  And the USB cable is similar to the following:

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=25512&cPath=135&utm_source=GoogleBase&utm_medium=CSE&utm_campaign=export_feed&gclid=CJqz96LO-8ECFdglvQodZmkAYA#GoogleBase

  The "flat" end for your computer/laptop and 'round' (well almost round) is for the printer. Please check the box first, depending on where you are (country, region), the cable may already be inside the box.

  Kind regards.

• How to install Microsoft Office 2007 after formatting of your laptop? My product key is not accepted...

  I formatted my Toshiba laptop with the following method:

  -do you have a backup to a hard drive

  -recorded an ISO on a DVD file

  -in the Control Panel, I clicked on recovery option

  -restarted from the ISO dvd

  -excerpt from the backup of the hard disk

  Now I see that I have not installed Microsoft Office programs. I tried to download it from the Microsoft page, but his does not not my product key and shows this message: The Office 2007 product key you provided is blocked for activation and therefore, is not eligible for a free download.

  I got the ultimate Office 2007 already installed in my laptop, but I have no CD more. I know that the product key from the sticker located in the lower part of the laptop.

  I've done a diagnosis with the diagnostic tool Microsoft Genuine Advantage, and this is the result:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - Q6MMK - KYK6X-VKM6G
  Windows Product Key hash: 289NoAWl2ZoVfuieux/315WkDIc =
  Windows product ID: 00426-OEM-8992662-00173
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {9A628C8E-F33E-4774-83D6-261E927E718E} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_rtm.101119 - 1850
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {9A628C8E-F33E-4774-83D6-261E927E718E}1.9.0027.06.1.7601.2.00010100.1.0.001x 32*-*-*-*-VKM6G00426-OEM-8992662-001732S-1-5-21-2552784156-2843067740-3341011315TOSHIBASatellite U300TOSHIBAV5.10 20090115000000.000000 + 00009333307018400FA08160409FLE Standard Time(GMT+02:00)03TOSQCITOSQCI00109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600173-02-2070-7601.0000-1432014
  Installation ID: 009874763552753386866994432950972234959926495236104283
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VKM6G
  License status: initial grace period
  Time remaining: 42600 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 23/05/2014 13:12:52

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NAAAAAEABAABAAIAAAABAAAAAgABAAEAJJSKnvhrBgxGg6CAYux6e2Tcgs8mYX7lhrYqhQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP TOSQCI TOSQCI00
  HPET TOSQCI TOSQCI00
  START PTLTD $SBFTBL$
  MCFG TOSQCI TOSQCI00
  SLIC TOSQCI TOSQCI00
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci

  What should I do now?

  Thank you

  You buy a genuine Windows 7 license. The copy of Windows 7 Ultimate, you have installed is an OEM SLP license that should only be preloaded with a new PC. You seem to have installed a copy of Windows 7 Ultimate that uses an activation exploit that bypasses the product activation.

  We know that it is because the BIOS date:

  20090115000000.000000 + 000

  Windows 7 was released in October 2009, the date of your BIOS says January 2009, which probably means your system is provided with Windows Vista or Windows XP.

  In addition, he is a well known Windows 7 Ultimate license which has been used all over the web:

  Windows product key: *-* - Q6MMK - KYK6X-VKM6G

  Do a search on the web.

  Thus, you must either charge your version of Windows that came on your computer (Vista or XP) or consider purchasing a license of Windows 7 genuine.

• How to intergrate Post Office at wide band in Apple Mail?

  I can't integrate my new provider of e-mail (Post Office) in my Mail from Apple despite of long phone calls to the line of 'support' of the post office. (There is no problem with my previous provider (TalkTalk)

  What happens when you try to add the account? What measures do you have and try to support post office?

• How to connect a microphone to capacitor for Mac Book Pro?

  Hi all

  After recently to buy a NW-700 Neewer and set up, I plugged it on my which seems to me to be a model 2012 or 2013 the Mac Book Pro, only to see that he has been received as headphones and tab out of my sound preferences. I don't think that there is something wrong with the microphone as I had also bought and hooked to a phantom power source. After you pass the cables through the power source, I plugged my card TRS in a TRS FosPower additional to the PLUG adapter, knowing that Mac does not accept audio TRS jacks. And then after all that, I plugged this card into my computer which was accepted as a helmet instead of a microphone.

  I have a theory, that the FosPower adapter converts only the input signals and the computer then thought of as a helmet. What do you think?

  Here are some pictures to help.

  The Mic

  

  Phantom power

  

  Adapter

  

  Before the plug-in

  

  Once the adapter is connected

  

  

  Thanks for your help,

  G

  Hi garretthelp,

  I understand that you are having trouble to get your microphone Neewer NW-700 to be recognized as a device on your MacBook Pro.  If the TRS FosPower to adapter PLUG does not work for you, have you tried using an audio interface with standard XLR connections for your audio configuration?    Which application you use on your Mac?  No matter what settings are you using in the Mac system preferences should also be done in the settings of the audio application as well.  I will include information for GarageBand below for your reference.

  I found the Web site of the manufacturer of your product and enter the SKU for the microphone Support page, but they do not have a manual available at the moment.  So, if using an interface standard audio does not resolve the problem, you will need to contact Neewer for more information.

  Plug in a microphone

  You can connect a microphone to your computer to record your voice, an acoustic instrument or any other sound on an audio track in GarageBand. You can connect a microphone to the port of audio input of your computer, a USB port, or, for better audio, an audio interface connected to a FireWire or USB port on your computer. You can also use your computer's built-in microphone to record sound.

  After you connect a microphone, you choose the input source for the range that you want to save in, and then turn eventually followed. Monitoring allows you to hear you play so you can hear the part you want to record as well as the rest of the project.

  Connect a microphone to your computer

  Do one of the following:

  • If you use your computer's built-in microphone, select the Microphone as the source of entry into GarageBand > Preferences > Audio > devices.

  • Plug the microphone on your computer audio input port (if she has a), then choose integrated input as input source of the track.

    

• Connect a USB microphone to a USB port on your computer. Choose the USB microphone as input source of the track.

  

• Connect an audio interface to a USB or FireWire port, then a microphone for the audio interface for recording.

  

• Connect a console audio mixer or console in an audio interface connected to your computer.

Set the input for a microphone source

1. Select the audio track.

2. Click the Smart Controls to open the smart controls, and then click the Inspector button of .

3. In the recording settings section, choose one of the following on the shortcut menu of the entry:

   • If you use your computer's built-in microphone, choose the built-in Microphone.

   • If you use a microphone connected to your computer's audio input port, choose built-in input.

     If the integrated entry does not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose enter integrated in the context menu of the Audio input.

   • If you use a microphone connected to a USB port, select the microphone.

   • If you use a microphone connected to an audio interface, choose the number of the channel for the microphone.

     If channels audio interface do not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose the audio interface in the context menu of the Audio input.

   Make sure the format matches the microphone or instrument. Choose a mono for monophonic instruments (with a single channel), then a stereo input to stereo devices (with a pair of channels).

4. Drag the recording level slider to change the level of input to the sound source volume.

   If the recording level slider is dimmed, you cannot change the volume of entry in GarageBand. In this case, use the volume control on the unit.

Take care

• How to connect more than 18 players for windows media Encoder 9.

  Hi, I try to use Windows Media Encoder 9 to 24 players conect to the streaming signal, the problem I have is that I did that 18 connections at the time, I have not been able to get 24 connections.

  Also when I disconnect a player which is the signal, other players who did get the signal before gets it.

  I already configured the registry to allow 50 connections. I use Win XP SP3. What can I do? Thank you.

  Hi Johnny Gomez.

  The question you posted would be better suited in Microsoft Expression Encoder Forums. I suggest you to send your query in Microsoft Expression Encoder forum for better support.

  Microsoft Expression Encoder Forums
  

• Question of USB connection? Office Jet 4500 g510n

  I have a HP 4500 g510n printer.  It works great as a home network wireless.  I noticed that there is a connection to printer cabe on the back of the case.  There is nothing in the mannual users on a cable connetion.  This printer may be connected to the computer with a USB printer cable?  Is the port to connect just one part of a multi-model standard case and not connected to anything for this model?   If it can be connected can manage both wireless and cable connection at the same time?  I have a pc I ' d electrician it but I have others who need to continue using the wireless.  Thanks for any information.

  Hello

  Any USB connection as part of its standard specifications of the printer support, it means that you don't connect the model 4500 with a USB wireless as well.

  Network and USB connections will not interfere with each other, you can use the printer with a USB connection to one of your PC and the network wirelessly with any other PC.

  Kind regards

  Shlomi

• How to install HP Office Jet Pro 8500 wireless on Mac with os x worm 10.9.1

  Just bought an Apple MacBook with OSX worm 10.9.1 and trying to figure out how to install the printer of the object to work with her.  I am totally new to Apple products.  The website of HP showed install info for lower OSX 10.9.1 versions so I wonder if this printer is usable even on my new MacBookPro.

  Any help would be appreciated.

  -John

  Hi John,.

  You can find the steps to install and use the software on Mac OS X 10.9 in the following document:

  http://support.HP.com/us-en/document/c03967522

  For any question, you can also install the following package before, adding the printer:

  http://support.Apple.com/kb/dl907

  Kind regards

  Shlomi

• How to connect a pioneer elite 730hd for pc

  I have a dell pent 4 running vista business and a pioneer elite 730HDTV. I'D LIKE TO HANG THEM TOGETHER TO USE THE TV AS A MONITOR. REQUIRES A TECHNIQUE (AS A RF MODULATOR) HARDWARE OR DRIVERS

  Hello

  Here is the link that will help you to connect your computer to a TV; your computer must have an output port that matches one of the input ports on your TV.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps!

• How long it take office creative cloud for download?

  I just started to download desktop creative cloud and it's going so slow... Any ideas as to how long it will take to download? From one day to the next? Or a few hours? Thank you.

  Hello

  Please see the link below:

  Adobe Store download FAQ

  You can also see the thread below where the request has been addressed:

  How long will it take to download the trial of Adobe software?

  Kind regards

  Sheena

• How can I change the billing address for my Apple Store account?

  Hello

  I recently moved and I want to update the billing address in my Apple Store account. I'm trying to complete your address after the connection, but he keeps asking my credit card number and the form submit unless I fill in a number. I have never used a credit card and don't have, I use Click & Buy (I am from the Netherlands).

  How can I change my address? Thank you.

  P.S. I did not know what community I should post this, perhaps this post should be moved?

  Hello Applesnob,

  Thank you for using communities of Apple Support.

  I see that you want to change your billing address in your Apple Store account. The following article provides information on how to accomplish this, as well as the evolution of your payment information 'None '.

  Manage your Apple ID account information

• How long the registration process generally takes for principal apple

  I signed up about two weeks ago and my Director has not been contacted nor have I received any kind of emails... we already have a configuration of DEP account and checked - but I don't have an ETA or idea, if something went wrong during registration... It is a slow process of moving, or y at - it somebody I can contact about this?

  Hey emsd37,

  I understand that you have questions about registration of device program. You can find the answers to these questions in the following link:

  Where can I get more information and help?

  To get general information on the program, see the Guide to registration device for businesses and education program. For detailed instructions for using the program, see The Apple help deployment of programs. The following articles also provide additional information:

  • Understand Apple, Reseller ID and DEP DEP customer numbers
  • Apple Configurator: Transition to Apple programs deployment
  • Device registration: iOS activation procedure and registration of MDM
  • Device registration: register for a device with hotel services
  • Device registration: DEP officer must approve the new terms and Conditions for new versions of the OS

  If you need assistance with registration, click the need help on registration screens to find the phone number of support of registration for your country or region.

  If you need help to use the program once your registration is complete, contact AppleCare Enterprise technical support or education.

  Device registration program frequently asked Questions (FAQ) - Apple Support

  https://support.Apple.com/en-us/HT204142

  Thank you for using communities Support from Apple. Have a good!

• How to connect and use Stor.E TV with Apple Mac

  Hello

  I just bought the Stor.E TV but I use Apple mac.
  Y at - there a program I can download or just a way that I can connect my Stor.E to my computer?

  At the moment it is locked.

  Thanks :)

  Hello

  I m not very good if you could use this since there is no special software for MAC OS leopard.
  But the TOSHIBA StorE TV supports a common USB port and can be connected to the mac / laptop using the common USB plug a cable play

  Perhaps that the MAC will recognize this external USB device automatically and you won't need to install any software or drivers

• How can I create system recovery disc for a new laptop with windows 7 Home Premium?

  I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

  In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

  Jim

  You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
  Kerry Brown MS - MVP - Windows desktop experience

• How to connect your HBS-810 Ultra LG to Apple Watch

  My Apple Watch will not pair with the headset.  All solutions?  Thank you.

  Hello

  You will find you must cancel pairing your headset to your iPhone (or any other device that already, it can be associated with) until you can pair it with your watch. If it is paired with your iPhone, for example:

  -On your iPhone go to: settings > Bluetooth.

  -Find headphones in the list, then tap Forget this device.

  Then, to pair the headset with your Apple Watch:

  -Put your headset in discovery / pairing mode (follow the manufacturer's instructions).

  -Your watch, go to the home screen (press the digital Crown), then press settings (the cog icon) > Bluetooth.

  -Your watch will now search for Bluetooth accessories that are in discovery / pairing mode.

  -Choose your helmet when it is shown.

  -If you are prompted, enter a password or PIN.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories