How to connect an osciloscope graphic

How to turn the channel on the elvis osciloscope

How do I take the voltages of 0V to 10V in the 0, 2V range to the osciloscope ahead of elvis, help me please.

Tags: NI Software

Similar Questions

  • How to connect 2 screens on a HPE-210y PC?

    How to connect 2 monitors to a HPE-210y PC? I have 2 monitors HP2010i . Behind the PC, there is a VGA - DVI input and an HDMI input. I have connected a monitor to the PC with a VGA - DVI adapter. I saw a VGA input which was covered with a plastic plate "DO NOT REMOVE" black screwed attached. I removed the plate and the second monitor connected.

    The second monitor keeps saying "No Signal" and goes to sleep. I tried the monitor plugs around switching, but I keep getting the same results. Only the monitor connected to the VGA - DVI input works.

    How can I connect two monitors to this PC?

    Thank you

    You must also use the HDMI port. To do this, you need an adapter DVI HDMI and a DVI cable.

    The other VGA port has been covered for a reason, to keep you to try what you did. When a graphics card is used, the video port of the motherboard is disabled.

    See you soon,.

  • How to connect by Satellite 1800 400 on TV?

    Hello
    I want to connect to my Toshiba Satellite 1800/400 on my TV, but I don't know how to install a secondary graphics card. My graficscard is a Trident Cyberblade Ai1 video accelerator.
    Please help because I get hopeless and frustrated because I need for school

    Hello Kevin

    As far as I know you don t need to install a secondary graphics card. The laptop got the output video output jack to transfer NTSC or PAL data to external devices (TV).
    If you want to activate the TV-out function, please go to display properties, and then click Advanced. Now click the device tab to display.

    There you can set the parameters on television and in the multi-screen TV/LCD devices section. Don t forget the TV Standard (PAL or NTSC).
    However, with the FN + F5 key combination, you can choose between the LCD and TV.

    Good bye

  • How to connect to my HDTV Dell computer?

    Original title: remote monitor
    I have a Dell Vista computer. Plugged in computer to HDTV SVGA cable, but get no picture on the TV. The input of the TV is correct. What is my problem?

    Have you changed the input on your TV?
    You must also configure your graphics card options. Right click on the desktop-> graphics properties.

    How to connect a computer to your TV
    http://www.techlore.com/article/10061/how-to-connect-a-computer-to-your-TV/;JSESSIONID=C76E35DF11E36B40811F5B7F1D51284C?textpage=2

  • How to connect laptop Insperon 1525 to my flat screen TV?

    Original title: help im seriously disappointed on the compatibility of the technology today

    I have an inspiron 1525 computer windows vista laptop and I want to connect to my phillips flatcreen as ive done in the past I have updated my graphics driver and tried to change the resolution settings but nothing I seem to solve the problem ive read everything on the web and none of it helped me tv Wizard does not detect my TV either this is my last resort please help

    Hello

    Read these?

    http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

    http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

    http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  • How to connect a laptop to a TV via S-Video?

    I try to connect my Toshiba laptop (A300 / 1 G 0) to a 32 "Sony TV (KDL-EX403) via S-video to SCART, but nothing happens. I connect it all that but the TV does not recognize the laptop and the laptop does not recognize the TV. I updated my graphics driver and checked all the display settings that I can find but still nothing!

    By the way my graphics card: Mobile Intel 965 Express Chipset Family

    WHAT CAN I DO? HELP WOULD BE GREATLY APPRECIATED!

    I try to connect my Toshiba laptop (A300 / 1 G 0) to a 32 "Sony TV (KDL-EX403) via S-video to SCART, but nothing happens. I connect it all that but the TV does not recognize the laptop and the laptop does not recognize the TV. I updated my graphics driver and checked all the display settings that I can find but still nothing!

    By the way my graphics card: Mobile Intel 965 Express Chipset Family

    WHAT CAN I DO? HELP WOULD BE GREATLY APPRECIATED!

    =======================================
    Perhaps the following links will propose a few ideas:

    How to connect my computer to a TV
    http://hookpctotv.com/

    How to connect your PC to your TV
    http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

    Company information
    http://www.SVIDEO.com/info.html J of volunteer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How to connect laptop HP 2000-329WM to HDMI TV

    Pls tell me how to connect laptop HP 2000-329WM on TV?

    My TV has HDMI Port.

    Made to digital signal output laptop video card support through VGA port function

    Will it work if I use cables in the links below

    http://www.Amazon.com/eForCity-gold-HDTV-adapter-cable/DP/B004S5H30I/ref=sr_1_fkmr0_3?s=electronics&...

    http://www.Amazon.com/video-cable-black-support-necessary/DP/B002TUC64W/ref=sr_1_fkmr0_1?s=electroni...

    Now there are ways to do it but unfortunately, it would be really expensive. The only possible way would be to change the graphics card which means basically replace the motherboard together.
  • How to connect two databases to a single listener

    Hello

    How to connect two databases to a listener.is it is possible or not

    Hello

    Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

    Example is as follows

    Listener.ora

    SCREW =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
    )
    )

    SID_LIST_VIS =
    (SID_LIST =
    -1 database configuration
    *(SID_DESC =*)
    * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
    * (SID_NAME = DB1) *.
    *)*
    -Database Setup 2
    *(SID_DESC =*)
    * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
    * (SID_NAME = DB2). *
    *)*
    )

    Then restart your listener.

    Kind regards
    Asif Muhammad

  • How to connect my i phone 6 to 10 on my computer windows

    How to connect my I Phone 6-10 Windows on my computer

    An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

  • How to connect to itunes for ipad airplay without using computer?

    HOW to CONNECT IPAD AIRPLAY to ITUNES WITHOUT the HELP of a FULL ❓l

    There is no need to shout. What you're trying to use AirPlay to stream content from your iPad to?

    Using AirPlay: How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support.

    (I asked for your message to be moved to use iPad forum, where you have posted is for questions about the iTunes U app.)

  • How can I install my graphic custom, self-created Persona / theme that I use on my XP on my Win7Firefox?

    How can I install my graphic custom, self-created Persona / theme that I use on my XP computer on my Windows 7 Firefox? (Firefox 17.0.1 Windows 7 64 bit home edition? (There is, as far as I know, no 'little Fox' icon visible below on the left!) I use a downloaded "Persona" or "Theme" ((je vous souhaite vous les gens ne changerait pas les termes importants à la baisse d'un chapeau!)) and it works very well...

    You need to install the Persona more extension to easily install a character via its files instead of via the internet.

  • How to connect new IMac to old IMac to transfer files?

    I need to plug my June 2010 IMac in a new IMac 2016 to transfer data.  What cable do I and what ports should I use to connect?

    Thank you.

    Gina

    You can do it with an Ethernet cable (and on two Macs Ethernet ports) and use file sharing.  You can also connect via WiFi, but the transfer speed will be slower.  If both Mac connected to the Internet via a common router, you already have a link between two Macs.  Here is information on file sharing

    How to connect with the file sharing on your Mac - Apple Support

    There is also an automated tool called Migration Wizard, if duties are not suitable for your task

    Move your content to a new Mac - Apple Support

  • How to connect a new MacBook in my time for the initial file transfer capsule

    How to connect a new MacBook to my existing time capsule to transfer files as part of the first implementation of my MacBook?

    You say that you have a new MacBook and that you have posted to the forum for the retina MacBook 12 "section, but your tag indicates that you have a MacBook Pro. Please specify.

  • How to connect a drive to a 2015 iMac firewire external

    How to connect an external drive firewire to an iMac of 2015 for use with time machine?

    See love at first sight to FireWire adapter

    Apple Thunderbolt cables and adapters - Apple Support

  • Want to 750-209: how to connect an old sound system to a new computer

    I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

    My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

    Any ideas on how to accomplsh my goal.

    Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

Maybe you are looking for

  • External hard drive USB

    Primarily for backup purposes, I have connected via USB, a new external hard drive to my Compaq Presario (using Windows 7) but I don't see how to access or use. Removal and replacement of the plug USB produce noise sound from the PC that I expect.  S

  • Re: Satellite L500 - crackling noise when audio plays

    Hi all I bought a few weeks ago L500 (Windows 7 64-bit). Everything is fine except for the sound. 1 h or more after running computer, the speakers begin to produce a "cracking", "metal" noise when the audio is reproducible, regardless of the source (

  • Cannot order a replacement of my iPad adapter

    Hello! I have seen the adapter plug of my iPad mini 2 is covered by the exchange of the taken adapter program wall Apple AC but when I try to download a new one in the option of replacement of Internet, I fill out all the information, but then I alwa

  • restarting TC daily for Safari fix pages...

    For several weeks, I had to restart my TC (2013, terabyte) daily Safari load the page. Safari is stuck at the loading of the page and it can not find the server in the site of sez. It does not say that I am not connected to the internet. The wi - fi

  • Qosmio G30-158: is it possible to watch digital TV with Qosmio Player?

    Living near Paris, I recently purchased a QOSMIO G30-158 PC, with tuner hybrid, and even if it is easy enough to watch digital tv programs with Windows Media Center, I don't understand why the Qosmio Player can only watch the analogue programmes, but