How to connect Equium A100 and second computer via LAN

Similar Questions

• How to connect my Blackberry and my computer with Bluetooth?

  I was wondering how to connect my blackberry and my computer with bluetooth and I tried, but he will not find my device. I don't know how check that the Bluetooth software included with Windows.

  Hello

  ·        Who is the manufacturer of the system and what is the model?

  I suggest you to consult the tutorial that is mentioned below. You also have a section that tells you how to check that the Bluetooth software included with Windows. If your system has been installed on the Bluetooth system then the icon will appear in the notification area. If this isn't the case, you must install the Bluetooth drivers on the system.

  How to set up Bluetooth connectivity between a smart phone BlackBerry and BlackBerry Desktop Manager

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB04132

  I suggest you return the item mentioned below.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect Equium A100-306 to HDTV?

  Hello

  I was wondering if it was possible to connect my Equium A100-306 to my HDTV using a VGA cable component? The laptop has the chipset intel 945g.

  Thank you.

  Hello

  You cannot convert only a RGB (VGA) signal to component (Y-Pr-Pb), since you will need a converter that transforms the signal vga to this component.

  Which means that you also a converter for cable that could be very expensive. But if you've got components that you should be able to display an image on a device that has entry components. Don t think you will be able to run the HD-ready or full HD on a HD TV, since a HD signal requires an HD port on your computer and a disk hard taking supported system with better graphics chip and then a chipset intel.

  Welcome them

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to connect two harddiscs in a computer

  I don't know what's going to happen if I connect the

  hOW to connect two harddiscs in a computer

  http://US.yhs4.Search.yahoo.com/YHS/Search?p=How+to+Connect+Two+harddiscs+in+One+Computer&fr=AltaVista&FR2=SFP&iscqry=

  http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+to+connect+two+hard+disks+in+one+computer&oq=how+to+connect+two+harddiscs+in+one+computer&gs_l=hp.1.0.0i13i30.3151.3151.0.7535.1.1.0.0.0.0.224.224.2-1.1.0...0.0...1c.b0ubsyG8v-w&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5b25e3ab4ae8856e&biw=833&bih=548

  UTC/GMT is 17:27 on Wednesday, August 8, 2012

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• Cannot connect Equium A100 for WLAN

  Hello world

  I need help! I brought an Equium A100 in February from PC World, and although I have not tried too many wireless connections, it seems impossible to connect to unsecure wireless networks.

  However, it's quite strange. I managed to get another PC to connect to the laptop through an ad hoc network using the wireless link, so I know that the card works. The wireless networks are, but when you choose one that is not secure it says it can not connect and when you click on diagnose, he said: he does not know why!

  I downloaded the latest driver for the wireless, and the machine is less than half a metre of wireless point. I tried 4 networks and starting to pull my hair!

  Someone at - it ideas? Help!

  Hello

  Are you sure that several WLan networks are not secure, and an another security as the MAC address filtering settings were not set to the WLAN router at 100%?

  Is the wireless network card supports the standard wireless even like 802.11 A, B or G?

  I have two different cell phones at home. Both are ready wireless, but it does not connect to my router because of the Wlan standard.
  The router supports B/G and the map only A/B.
  I have studied a long time and finally I discovered that different wifi standards could be the reason for connection problems.

• How to connect to your Windows XP computer if I forgot my password?

  Original title: forgotten password

  I forgot the password. IM the administrator

  screen in safe mode, what I do now?

  Hi josegoggle,

  You can view the Microsoft KB articles and check:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  You forgot your Windows XP Home password? -Part 1: Introduction

  http://support.Microsoft.com/kb/894900

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to connect a wireless and boardband on HP laptop wireless mouse

  Using XP on a laptop HP with mouse & keyboard wireless can not connect to wireless broadband and or wireless printer will not run 2 currencies wireless is there away around this problem

  Hi Gwenbour,

  What is the number and the model of your keyboard and wireless mouse?

  Those are two different questions you must connect your keyboard to your computer wireless mouse and the second is to connect to the wireless network. Try to solve one by one.

  Follow the steps mentioned in the link to connect to your keyboard and wireless mouse

  HP and Compaq PC - keyboard and wireless mouse troubleshooting

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=402580&prodTypeId=329290&ObjectID=c00006821

  You can use the quick start guide that came with your mouse and wireless keyboard to connect to your computer.

  Just do not connect to a network wireless broadband, follow the steps mentioned in the article.

  Wireless Network Management Center

  http://h20239.www2.HP.com/TechCenter/wireless/wireless_TS.htm

• I installed a driver for my printer Hp Officejet Pro L7380. How to connect the printer to the computer that works with windows vista?

  I installed a driver for my printer Hp Officejet Pro L7380. I can print from my computer and it detected that it, I can't scan anything on my computer because it is not connected. I have tryied Conect it but can not select. So my question is, how I connect printing to computer?

  Specify that you are trying to scan a document Hp Officejet Pro L7380 to your Vista machine.  It has only a single computer attached, or is it a printer networked with other computers?

  If you have installed the base drivers and not the additional software that allows scanning etc so maybe it's why you fail.

  Have a look here.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=au&DLC=en&sw_lang=&product=3198092#n190

  It might be possible with just the base drivers, for other software, such as your Photo editing programs, including painting, for import documents or images from the scanner.  Windows Fax and Scan can be able to do.  When you go in such programs are there options scan and they see your scanner?  If this is not the case, try the full download.

  If you want to of HP to make scanning programs, you may need the-base drivers and software (larger download).

  For my HP ' All in one ' works like a scanner, it was necessary for me to download all drivers and software.

• have satalite, how to connect sony bravia and blue ray player to wired dsl internet

  have satalite tv, how to connect my player blue ray sony bravia tv and sony to a wired ADSL internet connection,

  Hello

  What do you mean exactly when you say hacking people have constantly been in?

  If you feel that your computer can be hacked, I recommend you install a good antivirus. You can install Microsoft Security Essential. This is a Microsoft free anti-virus program.

  To secure the wireless connection, go through the steps from the link and check if it fits your need. Browse the article to learn more about securing your wireless connection.

  Hope this helps and let us know if you need assistance in the future. We will be happy to help you.

• How to connect a wrt150n and a whole wndr3400v2 to extend your wireless connection

  How to connect these two wireless routers, but the first as a main router without losing my security and configuration of port forwarding?

  Thank you in advance for your help!

  Thank you very much for the help. The wndr3400v2 is enough for my house. Yes, problem solved.

• How to connect to my HDTV Dell computer?

  Original title: remote monitor
  I have a Dell Vista computer. Plugged in computer to HDTV SVGA cable, but get no picture on the TV. The input of the TV is correct. What is my problem?

  Have you changed the input on your TV?
  You must also configure your graphics card options. Right click on the desktop-> graphics properties.

  How to connect a computer to your TV
  http://www.techlore.com/article/10061/how-to-connect-a-computer-to-your-TV/;JSESSIONID=C76E35DF11E36B40811F5B7F1D51284C?textpage=2

• I upgraded from PSE12 to PSE14 on a single computer.  How do I upgrade to a second computer running PSE12 also at the present time?

  I upgraded from PSE12 to PSE14 on a single computer.  I want to do it on a second computer that is also running PSE12 now.  How can I do?

  The same way you did on the first.

  Install it from here:

  Download Photoshop Elements | 10, 12, 14, 11, 13

• Need to find a way to understand how DB2 connect to Oracle and mirroring of data etc.

  Hi, gurus,

  I just take over a source project which is the ICOMS as400 db2 database. Seems data mirro that CDC is used to replicate from DB2 to oracle.

  I am very new to this CDC datamirror, more I am new to figure out how db2 connect to oracle, it is only through db link or what? or is it tnsnames entry?

  I wish someone in this forum can point me in the right direction.

  Thanks in advance.

  Hello

  What do you not sure about?
  If Oracle can be the site of conduct, you can use the gateway for DRDA database and we can help you with that. If you need assistance on setting up DataMirror CDC to connect to Oracle, then you will need to contact IBM because it is one of their products.

  Kind regards

  Mike