How to connect my pc to the dvd recorder to project on my TV?

Hello

I have a Toshiba laptop with Win7 installed and I would like to connect it to my TV. The thing is that my TV (flat screen Philips crt) does not have a HDMI connection, but it is connected to my recorder DVD (Sony), which has a HDMI connection port. What I would like to make, and I tried to do, is to connect with the PC on the DVD and then project HDMI cable to my TV. Of course, my TV is set to 'See' the DVD to the right path. Usually, I do the same thing when I connect my camcorder to the DVD project my recordings on the TV screen, but it does not work with the HDMI connection.

Does anyone have suggestions, ideas?

Thank you very much!

Maybe not, but did the Sony HDMI input and output?

It seems, at least that I misread, that some Sony DVD have only HDMI out (apparently), this one for example - http://www.sony.co.uk/product/dvd-player/dvp-sr760h/technical-specifications#tab as in "output HDMI 1 (rear)"


There are other outlets in common? - http://windows.microsoft.com/en-US/windows7/Connect-your-computer-to-a-TV


There were converters such as about - http://www.Amazon.co.UK/brand-1080P-composite-converter-support/DP/B008MHY1VC/ref=sr_1_1?ie=UTF8&QID=1382279080&SR=8-1&keywords=HDMI+to+composite

(random example) but I've never used them so I can't tell how well (or not), they work.


Tags: Windows

Similar Questions

  • How to connect to Vista, if the Admin password is forgotten?

    My uncle put up our computer and I forgot the password to log in the Admin. I need to enter the Admin account so I can install my brothers computer game. How to connect us or change the password? We only have an Admin account and two standard user accounts.

    I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

    read the policy at the link below

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  • How can I activate images on the DVD in video file so that I can edit and send to people?

    Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

    Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

    Thank you!

    When you insert the DVD in your DVD player... close
    all the windows that can open and then go to... Start /.
    Computer... right click the icon for the DVD player
    is in, and then select or open Explorer.

    The files you need from the DVD are the. VOB files.
    You will find them in the VIDEO_TS folder. Copy them
    in a folder on your hard drive. Or you can copy the
    full VIDEO_TS folder.

    First... just try to rename one of the. VOB files to
    . MPG or. AVI and see if it will matter in Movie Maker.
    If import works... drag the file to the timeline and
    Economy/publication it to .wmv or .avi format. Then...
    Re - import new video film for editing purposes.
    (if you have Vista Home Premium or Ultimate, you)
    may be able to import the VOB files in Movie Maker
    as they are)

    (FWIW... you can probably play the files renamed
    in Windows Media Player to be sure that VOB
    file to edit)

    If you are unable to import the files they need to be converted
    another .wmv format would be a good choice.

    There are many programs that can do conversions...
    The following freeware is an example...:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup260.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)

    First, you will need to decompress the file or just open the
    Drag FFSetup260.exe out of the folder
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

  • How to connect a simulation on the design of controllers to DAQ card?

    Hi guys... I have problems about control and design on the way to the simulation I just do simulation PID and I can not to connect to the path of the simulation DAQ card in the control design (function)... can someone help me how to connect that?

    Ayubi,

    First of all, remember that the control and the Simulation has a PID in the Palette "control and Simulation > Controllers.

    Then, to connect to a data acquisition card, you must use the DAQmx interface is there to connect. In general, National Instruments recommends allows you to deploy a controller a real-time system, but most likely your Windows computer should be good enough for your application. Please see the example of the expedition (in 2013):

    C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real - time\DAQmx\RT PXI DAQmx single channel PID.lvproj

    If you don't have a LabVIEW Real - Time (RT), you can simply open the VI:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real-time\DAQmx\DAQmx single channel PID.vi

    Remove the shared Variables in the code and he would be executed on a computer with a DAQ card.

  • How to connect my PC to the router?

    New connection PC Help!

    Hi, we are changing our IPS at Virgin (connection broadband) to the warehouse Utility (router wireless connection), but I can't work out how 'connect' my PC to the router. My wife has a laptop that is already running through the router. I tried the obvious options on the control panel to connect my PC, but have failed miserably! Any ideas, please!

    Hi Eagozz,
     
    Connect the router to the computer by referring to the manufacturer's manual.
     
    Try to connect to the available wireless network. Here are some articles that might help you to do the same thing:
  • How to connect different VM in the same workstation?

    Hello

    I created two VM in workstation 9.0 with Server 2008 R2 installed in them. I installed Active Directory domain services and configured the DNS on the first virtual computer and want to connect VM second to the first VM area.

    In the first VM, I configured the static IP address:

    The connection-specific DNS suffix. :
    IPv4 address...: 192.168.2.10
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.58.0.
    The DNS name is: primaryserver.local.
    When I try to ping of VM1, VM2 it says request failed.
    IPconfig all to my laptop is:

    Windows IP configuration

    Name of the host...: hp - HP

    Primary Dns suffix...:

    ... Node type: unknown

    Active... IP routing: No.

    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt #2

    Physical address.... : 68-5D-43-D3-C3-64

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt

    Physical address.... : 68-5D-43-D3-C3-64

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: Intel Centrino Wireless-N 2230

    Physical address.... : 68-5D-43-D3-C3-63

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::c64:fc76:7456:8b2c % 15 (Preferred)

    IPv4 address: 192.168.1.101 (Preferred)

    ... Subnet mask: 255.255.255.0.

    Lease obtained...: November 21, 2012 11:03:32

    End of the lease...: November 22, 2012 11:03:38

    ... Default gateway. : 192.168.1.1.

    DHCP server...: 192.168.1.1.

    DHCPv6 IOOKING...: 375938371

    DHCPv6 DUID customer...: 00-01-00-01-17-BB-FB-49-10-60-4B-D7-82-92

    DNS servers...: 192.168.1.1.

    192.168.1.1

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    Description...: Realtek PCIe GBE Family Controller

    Physical address.... : 10-60-4B-D7-82-92

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Bluetooth network connection Ethernet card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Device Bluetooth (personal area network)

    Physical address.... : 68-5D-43-D3-C3-67

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Ethernet VMware Network adapter adapt VMnet1:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet 1

    Physical address.... : 00-50-56-C0-00-01

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::986:7aba:2517:2aaa % 33 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.42.170 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 553668694

    DHCPv6 DUID customer...: 00-01-00-01-17-BB-FB-49-10-60-4B-D7-82-92

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet VMware Network adapter adapt VMnet8:

    The connection-specific DNS suffix. :

    ... Description: VMware Virtual Ethernet adapt for VMnet 8

    Physical address.... : 00-50-56-C0-00-08

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: fe80::f950:444 has: 1ce6:2e73% 34 (Preferred)

    IPv4 address...: 192.168.58.1 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 570445910

    DHCPv6 DUID customer...: 00-01-00-01-17-BB-FB-49-10-60-4B-D7-82-92

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {D7A28CE4-D9A1-4352-9F17-8BC11EE29375}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {8A032791-7A92-4704-8342-40DCDD5BBDB6}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #2

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft 6to4 card

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Teredo Tunneling Pseudo-Interface:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {33C5EC27-0D56-4BDC-8163-D3016B86A5C4}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #3

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {98DEE0A6-705B-4182-9070-D6C58303A0ED}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #4

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {34343F0B-5D4B-4097-84ED-B45BBFA29C60}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #5

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {0C4C428C-44E4-489F-924B-E989CE37BE36}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #6

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 16:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #7

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {E51638BF-AB42-4AED-B1BB-2BEC7E23474B}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #8

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Tunnel adapter isatap. {091791BC-56C4-445F-8880-7CA86FEFFE15}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Microsoft ISATAP #9

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    The command IPConfig of VM1

    Windows IP configuration

    Name of the host...: WIN-AJ57SQ7ACCV

    Suffix main Dns...: primarysever.local

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    ... DNS suffix search list: privatecloud.local

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :

    ... Description: Intel(r) PRO/1000 MT Network Connection

    Physical address.... : 00-0C-29-47-D4-44

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    IPv4 address: 192.168.2.10 (Preferred)

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. : 192.168.58.0.

    DNS servers...: 127.0.0.1.

    NetBIOS over TCP/IP...: enabled

    Tunnel adapter isatap. {B1C632F3-99FB-4A45-A2C4-EEB0183AF112}:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft ISATAP adapter

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Teredo Tunneling Pseudo-Interface

    Physical address.... : 00-00-00-00-00-00-00-E0

    DHCP active...: No.

    Autoconfiguration enabled...: Yes

    I want to know how to configure the following senario network settings and if you added a VM more in my computer and you reconnect to the VM1 field.

    Thank you

    Tiphaine

    Hello

    Disable the firewall on both servers windows and try to ping

  • How to connect to sqlplus on the cluster database

    Hello


    I have a task to export a database clusdb scheme, which is a cluster database.


    cluster database name: clusdb


    Instance name: > >-> > Hostname: > > ASM Instance:

    Clusdb.global_clusdb01 > > srvpd_01.global > > + ASM1_srvpd_01.global

    Clusdb.global_clusdb02 > > srvpd_02.global > > + ASM2_srvpd_02.global

    When I try to run "sqlplus" to connect to the database on any of the host, it shows the command not found error.

    # oracle@srvpd_01.global >: sqlplus

    -bash: sqlplus: command not found

    # oracle@srvpd_02.global >: sqlplus
    -bash: sqlplus: command not found

    How to connect to the cluster database?

    Thank you!

    +
    ORACLE_SID = CLUSDB
    ORACLE_HOME=/Oracle/product/DB/11.1.0/Clusdb; Export ORACLE_HOME
    ORACLE_SID = CLUSDB; export ORACLE_SID
    ORACLE_TERM = xterm; export ORACLE_TERM
    PATH = / usr/sbin: $PATH; export $PATH
    PATH = $ORACLE_HOME/bin: $PATH:. ; export $PATH
    LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib. export LD_LIBRARY_PATH
    CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH
    +

    Add the lines above to your .profile or .bash_profile depending on the shell you are using.
    logout and login again.

    Good luck.
    Murali Mohan

    Changed according to your variables. BTW, you can not SID more than 8 characters, which means that the name of your instance GLOBAL_CLUSDB01 is not your SID. So, try parameter with the name of the database as CLUSDB.

    Published by: Murali Mohan on January 17, 2011 04:09

  • How to connect iPhone 6 to the macbook air

    How do pair my i phone to my MacBook Air 6. Whenever I am trying to pair the two they connect for a second for two and then fail.

    There is no protocol taken in charge to connect the iPhone to your computer.

    What you trying to accomplish?

  • How to connect booklet 70ct to the Internet?

    I use this with Windows 98 and would like to know how I can connect to the internet. I also bought a PCMCIA external CD drive but cannot install the drivers for it. Also bought 4 port USB 2.0 Cardbus PC Card and would like to know if this can also be connected to the 70ct booklet.

    Hello

    Well, I guess that the LAN, and the modem port is not available on this device.
    I suggest you have a PCMCIA location. In this case, it should be possible to use a PCMCIA Lan card. Then, it should be possible to connect the LAN cable to the booklet.

  • How to connect my computer to the TV using HDMI?

    Original title: my TV projection

    How project what shows on the desktop of my computer to my TV / / / I have all ready have my computer connected through a hdmi cable, I want to just be able to see it on my tv and use my laptop and tv as screens... because since I changed to Windows 7, is not let me but I was able to before

    Hi AMH24,

    It seems that your problem is similar, but differs from the original question. Please start your own question and provide the details of your problem so that we can help you.

    http://social.answers.Microsoft.com/forums/en-us/mediacenter/

    Thank you.

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • How to connect SQL Dev to the local database?

    Hi all

    I have a local database on my laptop. I connect to the database using direct connect without the listener and tnsnames.ora, because I stopped him.

    How can I connect my SQL Developer to the database using direct connect?


    Thank you

    Probably what he finds through explore paths such as path.

    If on Windows, via the path to the files of Oracle binaries, probably it will look 'default' ORACLE_SID HKLM\Software\Oracle\ "tone" and spawn then oracle.exe with the value of the SID as an argument.

    For a more definitive answer, we can wait until the documentation is being updated with the connection type "local". :)

  • How to connect iphone 6s to the tv directly to the pupose games

    Please let me know connect iphone 6s directly to the tv to play games

    http://www.GottaBeMobile.com/2014/01/04/8-awesome-airplay-iPad-games-to-play-on-Apple-TV /.

  • How to connect my ipencil with the http://bit.ly/joc0zm application?

    I looked at the demos of the pencil for a job for which is obviously the http://bit.ly/joc0zm app. I bought the pencil and the http://bit.ly/joc0zm app but can find no way to add the pen device to the app. Only my finger works? How can I add the pen device to the http://bit.ly/joc0zm app?

    Assuming you have an iPad Pro, you should be able to plug the connector of lightning on the port your iPad lightning pencil to pair them up. When you have successfully paired with pencil, http://bit.ly/joc0zm should work as expected.  Good luck!

  • How to connect wired computer to the wireless printer.

    I spent hours on the phone with a representative of brother yesterday to try and get my DCP-L2540DW communicate with my computer without the computer being on wi - fi, without success. We already all this up and running, but we had to get a new router and configured Time Warner Cable technician differently things. I tried to re-creation of the network on the printer, but that did not fix the problem.

    I tried following all the steps that I can find online and the brother of troubleshooting, but I had no luck with either. Thanks in advance for any help

    Lets try to connect the printer using the LAN cable connection and see if you can get your PC to connect to this first. Disable all wireless on the printer and the whole upward for the connection of LAN cable.

    FYI: If the ISP's modem has a built-in router, it is best to fill the modem. Having 2 routers on the same line can cause connection problems: link >http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm if the modem cannot be filled then see if the modem has a DMZ option and enter the IP address of the router gets the modem and put it in the DMZ modems. Disable any WiFi modem from the ISP and filters such as firewalls and other. Make sure that the printer and the PC is connected to the EA router and not the ISP's modem.

  • How to connect virtual networks to the physical host network?

    I currently have 1 HP Microserver with IP 192.168.0.10 that is on my home network which takes place in ESXi5 as the operating system.

    Then I have a separate network of the VM on the host with the IP addresses of 192.168.10.x. I have 2 x 2 Machines virtual ESXi Win Svr 2008 (DC & vCenter) and 1 WIn7.

    How, or even not at all, can set up a link to my VM network on ranges 192.168.10.x to my host's network?

    I currently have all advanced VM to my virtual domain as the default gateway on 192.168.10.1 controller.

    Am I missing something really obvious? I am new to VM and network (that you can probably find).

    Any help appreciated.

    Thanks in advance. Questions please ask.

    Your default gateway 192.168.10.1 there 192.168.0.x network access? You can get it... or, you can add a second nic all virtual machines, to a portgroup on the same vSwitch as the management what IP vmkernel resides.

Maybe you are looking for

  • MacBook Air 2.1 a1304 cannot connect to the appstore and icloud

    Hello I have problems to connect to these services. First I use usb wifi dongle. I can't log on appstore and icloud. I have this pop info "until you can not connect to iCloud due to a problem with the confirmation of the identity of this mac." What c

  • Satellite R630-148 - Boot on CD under Windows 8

    My Satellite R630-148 was running on Windows 7. This week, my son has changed that and installed Windows 8. I would like to go back to Windows and I have the CD to do it but I can't boot from the CD while pressind key F8 when the computer starts... H

  • Open vi vi and close the last

    Hi all I tried the solution to my problem, but not found. Abstract in brief: I have a VI that uses for authorization, if all ok then it should open other VI("code-vi") and run it and close itself. I saw some people recommended, it can be done by simp

  • Troubleshooting installation printer driver on the computer. error message: "the arguments are invalid.

    I recently purchased a Brother (MFC-J265W) all-in-one printer that has a wireless capability.  I finished configuring wireless from the machine, however when I tried to install the printer drivers by using the CD-ROM, the installation failed because

  • How to format a drive

    I'm burning a few photos on the disk, and I'm not shore if your are in a folder or not.